To familiarize yourself with the AFT interface, select the pull-down menus from the AFT main menu to see the options. Hold your mouse over each AFT icon to view the icon description in the tool tip box.
Use the following topics to become more familiar with the AFT interface:
The header and trailer fields. The ALI Formatting Tool (AFT) displays all the ALI record data in the ALI tab. The ALI file consists of one header record and one trailer record only; there is not an individual header and trailer record for each ELIN record.
The ALI records fields that you configure and edit through Emergency Responder. They are disabled (greyed out) in AFT.
The record count field. This trailer field cannot be edited in AFT because AFT calculates this number internally based on the number of records selected to export.
If the NENA files are on the Master Cisco ER server and AFT is installed on the Standby Cisco ER server, you can use the Open Window Dialog box to browse to a shared Master Cisco ER folder.
Go to a specific ELIN number
1. Select Menu > File > Go to ELIN (Ctrl+E).
2. Enter the ELIN number.
If the ELIN is present, it is selected in the tree and the ALI tab is populated with data for that record.
If it is an invalid record number, a message displays with the valid range of numbers.
Go to a specific record
1. Select Menu > File > Go to Record Number (Ctrl+R).
2. Enter the record number.
If the record number is valid, that record is selected in the tree and the ALI tab is populated with data for that record.
If it is an invalid record number, a message displays with the valid range of numbers.
View ALI details for an ELIN/Select an ELIN to edit its ALI fields
Click on the ELIN in the tree.
This highlights the ELIN and populates its details in the right pane of the window.
You can then edit the ALI records by entering new values in the ALI editable fields.
Undo record change/Redo record change
Use one of these methods:
Click the Undo/Redo icon.
Select Menu > Edit > Undo record/Redo record change (Ctrl+Z/Ctrl+Y).
The Undo/Redo option remembers the last 20 record changes.
Cut/Copy/Paste record input
Use one of these methods:
Click the Cut/Copy/Paste icon.
Select Menu > Edit > Cut/Copy/Paste (Ctrl+X/Ctrl+C/Ctrl+V).
Select ALI records to be exported to your service provider
In the tree, click in the ELIN check box. Use one of the following options:
Select all ELINs in the tree by checking the root node of the tree.
Select all ELINs with a specific area code by checking the Area Code in the tree. For example, checking the 408 check box will select all the numbers in the 408 area code.
Select all ELINs with a specific City Code by checking the City Code in the tree. For example, clicking on 228 will also select 228-9333 and 228-5672.
Select an individual ELIN by checking the 4-digit directory number, for example, 9933.
Check marks will indicate the ELINs that are selected.
Generate Formatted File
Use one of the following methods:
Click the Generate Formatted File icon.
Go to Menu > Tools and click Generate Formatted File (Ctrl+G).
AFT generates an ALI file in a format that your service provider can read.
Perform a bulk update to the ALI files
1. Use one of these methods:
Click the Bulk Update icon.
Select Menu > Tools > Bulk Update (Ctrl+B).
AFT displays the bulk update form.
2. Select one of the following options:
To apply the changes to all records, click the first tab, Apply All.
To apply the changes to one area code, click the second tab, Apply by Area Code.
To apply the change to one area code and one city code, click the third tab, Apply by Area Code and City Code.
The bulk update feature saves the changes automatically.
Save updates to the ALI file
Select Menu > Tools > Save Record (Ctrl+S).
The new value is saved and displayed in the interface.
If you modify an ALI record but do not save the changes, an alert asks if you want to save the changes.
Close AFT
Select Menu > File > Exit.
If you try to close AFT without saving changes, AFT asks if you want to generate a formatted file.
Make sure you have completed the following tasks before you begin to use AFT to generate an exported file:
You have installed, set up and used Emergency Responder to configure ERLs with the ELIN and ALI information and to generate a NENA file. For information on performing these tasks, refer to the Cisco Emergency Responder Administration Guide.
To use AFT to generate a formatted file, perform the following steps:
Procedure
Step 1 Provide a NENA file generated by Emergency Responder as input to AFT in one of these ways:
Select Menu > File > Open (Ctrl+O) and browse to select the file name.
Use the File Open icon and enter the file name.
Tip If the NENA files are on the Master Cisco ER server and AFT is installed on the Standby Cisco ER server, you can use the Open Window Dialog box to browse to a shared Master Cisco ER folder.
AFT displays all the ELINs from the NENA file in a tree box in the left side of the page by the Area Code, City Code and 4-digit directory number.
Step 2 To view details of the ALI files, click on an ELIN in the tree.
This highlights the ELIN and populates its details in the right pane of the window.
Step 3 Edit the ALI fields by entering new values in the editable fields.
Step 4 Save any changes that you made to the ALI file:
Select Menu > Tools > Save Record (Ctrl+S).
Step 5 Select the ELINs that you want to export to the service provider by clicking in the corresponding check boxes in the tree.
To select all ELINs in the tree, check the root node of the tree.
To select all ELINs with a specific area code, click in the Area Code check box in the tree. For example, clicking the 408 check box will select all the numbers in the 408 area code. All the 408 numbers display check marks.
To select all ELINs with a specific City Code, click in the City Code check box. For example, selecting 228 will also select 228-9333 and 228-5672.
To select an individual ELIN, click in the 4-digit check box, for example, 9933
Check marks will indicate the ELINs that are selected.
Step 7 At this point, if the service provider-specific field is common for many ELIN records (for example, if all the ELIN records share the same Private Switch Code), you can use AFT's Bulk Update feature:
a. Select Menu > Tools > Bulk Update (Ctrl+B) or the Bulk Update icon.
AFT displays the bulk update form.
b. Select one of the following options:
To apply the changes to all records, click the first tab: Apply All.
To apply the changes to one area code, click the second tab: Apply by Area Code.
To apply the changes to one area code and one city code, click the third tab: Apply by Area Code and City Code.
Step 8 Generate a formatted file in one of these way:
Go to Menu > Tools and click Generate Formatted File (Ctrl+G).
From the Tool Bar, click the Generate Formatted File icon.
AFT generates an ALI file in a format specific to your service provider and prompts you for a location to save it.
Step 9 Enter a location where you want to store the formatted file.
Step 10 Using the service provider's preferred method of transmitting files, send the ALI file to your service provider so they can update their E911 database with the ELINs from the AFT ALI file.
Tip Be sure to keep a copy of the AFT ALI file for your records. This will be helpful if the service providers reports errors; you can make any required changes to the file without having to re-do all the AFT formatting changes.
Step 11 Your service provider returns the status of the ALI files.
If your service provider reports that there are no errors, you can continue using AFT to generate more formatted records or you can quit the program.
If your service provider reports that there are ALI errors, perform the following steps:
Make corrections to the formatted file that you sent to the service provider. All the error codes for the service providers are defined in the ALI format documentation for that service provider. Refer to their documentation to determine the errors in your file and correct the errors using AFT.
Note If an error occurs in fields that cannot be edited using AFT, you must
use Cisco ER to correct the fields. Then use AFT to generate the file
again.
Send the corrected file to your service provider. Again, be sure to keep a copy of your corrected file for your records.
Repeat this process until your service provider can read the formatted files and can use them to update their ELIN records.