|
Table Of Contents
Cisco Unified IP Conference Station 7935 Release Notes for Firmware Release 3.2(17) (SCCP)
Obtaining Documentation, Obtaining Support, and Security Guidelines
Cisco Product Security Overview
Cisco Unified IP Conference Station 7935 Release Notes for Firmware Release 3.2(17) (SCCP)
June 27, 2007
Use these Release Notes with the cmterm_7935.3-3-17-0 image for the Cisco Unified IP Conference Station 7935 (SCCP) running with Cisco Unified CallManager Versions 5.1, 5.0, 4.3, 4.2, 4.1, 4.0, 3.3, 3.2, and 3.1.
Contents
These release notes describe important information and known problems for this release of the Cisco Unified IP Conference Station 7935. These release notes provide the following information:
• Caveats
• Obtaining Documentation, Obtaining Support, and Security Guidelines
Related Documentation
Cisco Unified IP Phone Documentation
Refer to publications that are specific to your language, phone model and Cisco Unified CallManager release. Navigate from the following documentation URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
Cisco Unified CallManager Documentation
Refer to the Cisco Unified CallManager Documentation Guide and other publications specific to your Cisco Unified CallManager release. Navigate from the following URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html
Installation Notes
To load and install the required firmware image for the Cisco Unified IP Conference Station 7935 on Cisco Unified CallManager 5.1, 5.0, 4.3, 4.2, 4.1, 4.0, 3.3, 3.2, and 3.1, follow these steps:
Procedure
Step 1 Go to the following URL:
http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser
Step 2 To download the firmware for Cisco Unified IP Conference Station7935, click one of the following hyperlinks and follow the prompts:
•For Cisco Unified CallManager 4.3 and earlier:
cmterm-7935-sccp.3-2-17.exe
For Cisco Unified CallManager 5.0 to 5.0(3):
cmterm-7935-3-2-17-0-sccp.cop
For Cisco Unified CallManager 5.0(4) and higher:
cmterm-7935-3-2-17-0-sccp.cop.sgn
Step 3 To download the Readme file, which contains installation instructions for the corresponding firmware, go back to the URL shown in Step 1 and click the appropriate hyperlink.
cmterm-7935-sccp.3-2-17-Readme.htm
Step 4 Follow the instructions in the Readme file to install the firmware.
Registering the Cisco Unified IP Conference Station 7935 with Cisco Unified CallManager
To register the Cisco Unified IP Conference Station 7935 with Cisco Unified CallManager release 5.1, 5.0, 4.3, 4.2, 4.1, 4.0, 3.3, 3.2, and 3.1, follow these steps:
Procedure
Step 1 Log in to the Cisco Unified CallManager Administration application.
Step 2 From the menu bar, choose Device > Add a New Device.
The Add a New Device window appears.
Step 3 Select Phone from the Device Type drop-down menu and click Next.
The Add a New Phone window appears.
Step 4 Select the Cisco 7935 phone type from the drop-down menu and click Next.
The Phone Configuration window appears.
Step 5 In the Phone Configuration window, enter information in the following fields:
•MAC Address
•Description
Step 6 Click Insert.
The Cisco Unified CallManager Administration application asks if you want to assign a directory number.
Step 7 Enter the required fields.
Caveats
This section contains these topics:
Using Bug Toolkit
Known problems (bugs) are graded according to severity level. These release notes contain descriptions of:
•All severity level 1 or 2 bugs.
•Significant severity level 3 bugs.
You can search for problems by using the Cisco Software Bug Toolkit.
To access Bug Toolkit, you need the following items:
•Internet connection
•Web browser
•Cisco.com user ID and password
To use the Software Bug Toolkit, follow these steps:
Procedure
Step 1 To access the Bug Toolkit, go to http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl.
Step 2 Log on with your Cisco.com user ID and password.
Step 3 Click the Launch Bug Toolkit hyperlink.
Step 4 To look for information about a specific problem, enter the bug ID number in the "Enter known bug ID" field and click Search.
Open Caveats
Table 1 lists Severity 1, 2 and 3 defects that are open for Cisco Unified IP Conference Station 7935 using the SCCP version of firmware release 3.2(17).
For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.
Because defect status continually changes, be aware that Table 1 reflects a snapshot of the defects that were open at the time this report was compiled. For an updated view of open defects, access Bug Toolkit as described in the "Using Bug Toolkit" section.
Table 1 Open Caveats for Cisco Unified IP Conference Station 7935 in Firmware Release 3.2(17)
Identifier Headline and Bug Toolkit LinkA directory number which is a subset of another directory number cannot be called in SRST
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsh20517
Cisco Unified IP Conference Station does not register
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsh60690
MeetMe softkey has no response when conference call is set using Genessis Meeting System
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsi25311
Enabling and disabling DHCP causes validation error on Cisco Unified IP Conference Station
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsi48295
Cisco Unified IP Conference Station does not retrieve configuration file on restart
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsi71403
DHCP changes cause Cisco Unified IP Conference Station to reset while on a call
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsi95304
Cisco Unified IP Conference Station reboots when searching corporate directory
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsj15171
Resolved Caveats
Table 2 lists Severity 1, 2 and 3 defects that are resolved for Cisco Unified IP Conference Station 7935 using the SCCP version of firmware release 3.2(17).
For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.
Because defect status continually changes, be aware that Table 2 reflects a snapshot of the defects that were open at the time this report was compiled. For an updated view of open defects, access Bug Toolkit as described in the "Using Bug Toolkit" section.
Table 2 Resolved Caveats for Cisco Unified IP Conference Station 7935 in Firmware Release 3.2(17)
Identifier Headline and Bug Toolkit LinkSecond Cisco Unified IP Conference Station in a shared line hangs in a failback and failover scenario
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsd62614
Cisco Unified IP Conference Station hangs while using restore default from user interface in a scenario
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsd70946
Server error '413 N/A' appears when wrong input given in phone book
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCse89250
Duplicate phone book entries
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCse90611
No validation for upload logs under diagnostics in Cisco Unified IP Conference Station menu
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCse93370
Ping page in GUI does not get refreshed
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCse93388
Call Park Reversion message not displayed
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCse94529
Network settings do not work when two Cisco Unified IP Conference Stations are in a call
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCse94582
Phone Book does not accept 24 digits as directory number
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsf10268
Softkey templates work improperly
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsf18999
CFwdAll in an active call breaks the voice path
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsf20893
Cisco Unified IP Conference Station plays ringback tone if destination IP Conference Station has Call Forward All (CFA) set to `unknown'
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsg72715
Deleting the directory number freezes the Cisco Unified IP Conference Station
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsg72841
Directory number does not display completely
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsg76026
Reboot does not work
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsg76032
Pressing Menu > phone button in active call places Cisco Unified IP Conference Station in a strange state
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsg76088
Changing the ringer during an active call puts the Cisco Unified IP Conference Station on hold
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsg85470
Softkey templates incorrect in case of shared line
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsg87187
CFwdAll softkey is not shown when initiating a new call during active call
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsh20499
Cisco Unified IP Conference Station stops after DHCP discovery with no response
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsi18606
Cisco Unified IP Conference Station 7935 has one-way audio issue
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsi35475
Cisco Unified IP Conference Station reboots randomly
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsi55701
Dynamic Host Configuration Protocol (DHCP) changes can cause Cisco Unified IP Conference Station to reset while on a call
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsi95304
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Cisco Product Security Overview
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html. If you require further assistance please contact us by sending email to export@cisco.com.
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2007 Cisco Systems, Inc. All rights reserved.
Posted: Thu Jun 28 20:42:22 PDT 2007
All contents are Copyright © 1992--2007 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.