Technical Specifications

These sections describe the technical specifications and safety approvals of the DPA 7630:

Physical and Operating Specifications

Table A-1 includes the physical and operating specifications of the DPA 7630.

Table A-1: Cisco DPA 7630 Specifications

Specification	Value or Range
Dimensions (HxWxD)	1.75 x 17.25 x 15.5 inches
Weight	5.2kg (11lbs 8oz)
Power	100-240 VAC, 50-60 Hz
Processor	50 MHz MPC 860T
Operating environment	0° to 40° C (32° to 104° F)
Operating humidity	10% to 95% (noncondensing)
Nonoperating environment	-10° to 60° C (14° to 140° F)

Port and Cable Specifications

The DPA 7630 includes the following ports:

RJ-21 telco connectors for connection to Octel and Lucent systems (labeled Lines A, B, and C).

: Maximum cable length between the DPA 7630 and the Lucent and Octel systems is 100 meters.

RJ-45 jack for the 10/100BaseT connection (labeled Ethernet).
RJ-45 jack for the console connector (labeled Console).
3-pin IEC AC adapter.

Port Pinouts

These sections describe the port pinouts on the DPA 7630:

Telco Port Pinouts

Table A-2 describes the telco port connecto pinouts.

Table A-2: Telco Port Connector Pinouts

Pin Number	Function
1, 26	Unused
2, 27	Port 1 receive
3, 28	Port 1 transmit
4,29	Unused
5, 30	Port 2 receive
6,31	Port 2 transmit
7, 32	Unused
8, 33	Port 3 receive
9, 34	Port 3 transmit
10, 35	Unused
11, 36	Port 4 receive
12, 37	Port 4 transmit
13, 38	Unused
14, 39	Port 5 receive
15, 40	Port 5 transmit
16, 41	Unused
17, 42	Port 6 receive
18, 43	Port 6 transmit
19, 44	Unused
20, 45	Port 7 receive
21, 46	Port 7 transmit
22, 47	Unused
23, 48	Port 8 receive
24, 49	Port 8 transmit
25, 50	Unused

Ethernet Port Pinouts

Table A-3 describes the Ethernet port connector pinouts.

Table A-3: Ethernet Port Connector Pinouts

Pin Number	Function
1	TD+
2	TD-
3	RD+
4	—
5	—
6	RD-
7	—
8	—

Console Port Pinouts

Table A-4 describes the console port connector pinouts.

Table A-4: Console Port Connector Pinouts

Pin Number	Function
1, 8	Connected
2	DTR
3	TxD
4,5	Ground
6	RxD
7	DSR

Regulatory Safety Compliance

The DPA 7630 meets the following regulatory safety and compliance approvals:

CE Marking
Safety:
- UL 1950
- CSA C22.2 No.950
- EN60950
- IEC 60950
EMC:
- FCC Part 15 (CFR 47) Class A
- ICES 003 Class A
- EN55022 Class A
- CISPR22 Class A
- AS/NZS 3548 Class A
- VCCI Class A with UTP Cable
- EN55022 Class B
- CISPR22 Class B
- AS/NZS 3548 Class B
- VCCI Class B with FTP Cable

Caution Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Caution Hungarian Class A Warning: This equipment is a class A product and should be used and installed properly according to the Hungarian EMC Class A requirements (MSZEN55022), the Class A equipment are derived for typical commercial establishments for which special conditions of installation and protection distance are used.

Taiwan (BSMI)

Japan (VCCI)

Table of Contents

Technical Specifications