Regulatory Compliance and Safety Information for Cisco TelePresence System Release 1.1

This document provides international agency compliance, safety, and statutory information for the following components of the Cisco TelePresence system:

•Cisco TelePresence high-definition plasma display screen, model CTS-DISP-65-GEN1=

•Cisco TelePresence 3000 high-definition IP-based camera cluster, model CTS3K-CAM-CLUST=

•Cisco TelePresence 1000 high-definition IP-based camera, model CTS1K-CAM-CLUST=

•Cisco TelePresence primary codec controller, model CTS-CODEC-PRIM=

•Cisco TelePresence secondary codec controller, model CTS-CODEC-SEC=

•Cisco TelePresence microphones, model CTS-MIC

•Cisco TelePresence high-fidelity loudspeakers, model CTS-LDSPKR

Read this document before installing or servicing the Cisco TelePresence system.

Note Only trained and qualified service personnel (as defined in IEC 60950 and AS/NZS 3260) should install, replace, or service the equipment. Install the system in accordance with the U.S. National Electric Code if you are in the United States.

Warning IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

This document contains the following sections:

• Translated Safety Warnings

• Cell Phone Interference Caution

• Declaration of Conformity for the European Community, Switzerland, Norway, Iceland, Romania, and Liechtenstein

• Compliance and Safety Information

• EMC Class A Notices and Warnings

• Obtaining Documentation

• Documentation Feedback

• Cisco Product Security Overview

• Obtaining Technical Assistance

• Obtaining Additional Publications and Information

Translated Safety Warnings

This section contains translations of the warnings appropriate for the Cisco TelePresence system.

Statement 19—TN Power Warning


Warning	The device is designed to work with TN power systems. Statement 19
Waarschuwing	Het apparaat is ontworpen om te functioneren met TN energiesystemen.
Varoitus	Koje on suunniteltu toimimaan TN-s�hk�voimaj�rjestelmien yhteydess�.
Attention	Ce dispositif a �t� con�u pour fonctionner avec des syst�mes d'alimentation TN.
Warnung	Das Ger�t ist f�r die Verwendung mit TN-Stromsystemen ausgelegt.
Avvertenza	Il dispositivo � stato progettato per l'uso con sistemi di alimentazione TN.
Advarsel	Utstyret er utfomet til bruk med TN-str�msystemer.
Aviso	O dispositivo foi criado para operar com sistemas de corrente TN.
�Advertencia!	El equipo est� dise�ado para trabajar con sistemas de alimentaci�n tipo TN.
Varning!	Enheten �r konstruerad f�r anv�ndning tillsammans med elkraftssystem av TN-typ.

Statement 331—Power Supply Installation Warning


Warning	The power supply must be placed indoors. Statement 331
Waarschuwing	De stroomtoevoer moet binnen worden geplaatst.
Varoitus	Tehonl�hde on sijoitettava sis�tiloihin.
Attention	Le bloc d'alimentation �lectrique doit �tre plac� � l'int�rieur.
Warnung	Die Stromversorgungsquelle darf nicht im Freien aufgestellt werden.
Avvertenza	L'alimentatore deve essere posto in un luogo interno.
Advarsel	Str�mkilden skal v�re plassert innend�rs.
Aviso	A fonte de alimenta��o deve ser instalada no interior.
�Advertencia!	El suministro de energ�a debe estar ubicado en un lugar cubierto y no al aire libre.
Varning!	Str�mk�llan m�ste vara placerad inomhus.

Statement 355—Telephone Receivers Produce a Magnetic Field


Warning	Telephone receivers produce a magnetic field that can attract small magnetic objects such as pins and staples. To avoid the possibility of injury, do not place the handset where such objects may be picked up. Statement 355
Waarschuwing	Telefoonontvangers produceren een magnetisch veld dat kleine magnetische objecten, zoals spelden of nietjes, kan aantrekken. Leg de hoorn niet ergens neer waar zich dergelijke objecten kunnen bevinden, om verwondingen te voorkomen.
Varoitus	Puhelimen ymp�rille muodostuu magneettikentt�, joka vet�� puoleensa pieni� magneettisia esineit�, kuten niittej� ja klemmareita. Aseta kuuloke aina paikkaan, jossa kyseisi� esineit� ei ole. N�in v�lt�t loukkaamasta itse�si.
Attention	Les combin�s t�l�phoniques produisent un champ magn�tique susceptible d'attirer de petits objets magn�tiques tels que des �pingles ou des agrafes. Pour �viter tout risque de blessure, ne placez pas le combin� � un endroit o� de tels objets peuvent se trouver.
Warnung	Telefonh�rer erzeugen ein Magnetfeld, das kleine magnetische Objekte wie Nadeln und B�roklammern anziehen kann. Um eine Verletzungsgefahr auszuschlie�en, legen Sie den H�rer nicht in die N�he solcher Objekte.
Avvertenza	I ricevitori telefonici producono un campo magnetico in grado di attrarre piccoli oggetti magnetici quali spilli e punti metallici. Per evitare danni personali, non posizionare il ricevitore accanto a tali oggetti.
Advarsel	H�ndsettet lager et magnetfelt som kan tiltrekke seg sm� magnetiske objekter som n�ler og stifter. For � unng� skade b�r du ikke plassere h�ndsettet der det finnes slike objekter.
Aviso	Os auscultadores telef�nicos produzem um campo magn�tico que pode atrair pequenos objectos magn�ticos como por exemplo alfinetes e agrafos. Para evitar eventuais ferimentos, n�o coloque o auscultador pr�ximo deste tipo de objectos.
�Advertencia!	Los receptores telef�nicos producen un campo magn�tico que puede atraer objetos peque�os, como alfileres o grapas. Para evitar posibles lesiones, no coloque el aparato cerca de objetos de este tipo.
Varning!	Telefonmottagare genererar magnetf�lt som kan dra till sig sm� magnetiska f�rem�l, t.ex. n�lar och h�ftklamrar. Undvik att l�gga luren i n�rheten av s�dana f�rem�l.

Statement 1001—Work During Lightning Activity


Warning	Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001
Waarschuwing	Tijdens onweer dat gepaard gaat met bliksem, dient u niet aan het systeem te werken of kabels aan te sluiten of te ontkoppelen.
Varoitus	�l� ty�skentele j�rjestelm�n parissa �l�k� yhdist� tai irrota kaapeleita ukkosilmalla.
Attention	Ne pas travailler sur le syst�me ni brancher ou d�brancher les c�bles pendant un orage.
Warnung	Arbeiten Sie nicht am System und schlie�en Sie keine Kabel an bzw. trennen Sie keine ab, wenn es gewittert.
Avvertenza	Non lavorare sul sistema o collegare oppure scollegare i cavi durante un temporale con fulmini.
Advarsel	Utf�r aldri arbeid p� systemet, eller koble kabler til eller fra systemet n�r det tordner eller lyner.
Aviso	N�o trabalhe no sistema ou ligue e desligue cabos durante per�odos de mau tempo (trovoada).
�Advertencia!	No operar el sistema ni conectar o desconectar cables durante el transcurso de descargas el�ctricas en la atm�sfera.
Varning!	Vid �ska skall du aldrig utf�ra arbete p� systemet eller ansluta eller koppla loss kablar.

Statement 1004—Installation Instructions


Warning	Read the installation instructions before connecting the system to the power source. Statement 1004
Waarschuwing	Raadpleeg de installatie-instructies voordat u het systeem op de voedingsbron aansluit.
Varoitus	Lue asennusohjeet ennen j�rjestelm�n yhdist�mist� virtal�hteeseen.
Attention	Avant de brancher le syst�me sur la source d'alimentation, consulter les directives d'installation.
Warnung	Vor dem Anschlie�en des Systems an die Stromquelle die Installationsanweisungen lesen.
Avvertenza	Consultare le istruzioni di installazione prima di collegare il sistema all'alimentatore.
Advarsel	Les installasjonsinstruksjonene f�r systemet kobles til str�mkilden.
Aviso	Leia as instru��es de instala��o antes de ligar o sistema � fonte de energia.
�Advertencia!	Lea las instrucciones de instalaci�n antes de conectar el sistema a la red de alimentaci�n.
Varning!	L�s installationsanvisningarna innan du kopplar systemet till str�mf�rs�rjningsenheten.

Statement 1019—Main Disconnecting Device


Warning	The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. Statement 1019
Waarschuwing	De combinatie van de stekker en het elektrisch contactpunt moet te allen tijde toegankelijk zijn omdat deze het hoofdmechanisme vormt voor verbreking van de aansluiting.
Varoitus	Pistoke/liitinkohta toimii p��katkaisumekanismina. P��sy siihen on pidett�v� aina esteett�m�n�.
Attention	La combinaison de prise de courant doit �tre accessible � tout moment parce qu'elle fait office de syst�me principal de d�connexion.
Warnung	Der Netzkabelanschlu� am Ger�t mu� jederzeit zug�nglich sein, weil er als prim�re Ausschaltvorrichtung dient.
Avvertenza	Il gruppo spina-presa deve essere sempre accessibile, poich� viene utilizzato come dispositivo di scollegamento principale.
Advarsel	Kombinasjonen st�psel/uttak m� alltid v�re tilgjengelig ettersom den fungerer som hovedfrakoplingsenhet.
Aviso	A combina��o ficha-tomada dever� ser sempre acess�vel, porque funciona como interruptor principal.
�Advertencia!	El conjunto de clavija y toma ha de encontrarse siempre accesible ya que hace las veces de dispositivo de desconexi�n principal.
Varning!	Man m�ste alltid kunna komma �t stickproppen i uttaget, eftersom denna koppling utg�r den huvudsakliga fr�nkopplingsanordningen.

Statement 1021—SELV Circuit


Warning	To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021
Waarschuwing	Om elektrische schokken te vermijden, mogen veiligheidscircuits met extra lage spanning (genaamd SELV = Safety Extra-Low Voltage) niet met telefoonnetwerkspanning (TNV) circuits verbonden worden. LAN (Lokaal netwerk) poorten bevatten SELV circuits en WAN (Regionaal netwerk) poorten bevatten TNV circuits. Sommige LAN en WAN poorten gebruiken allebei RJ-45 connectors. Ga voorzichtig te werk wanneer u kabels verbindt.
Varoitus	Jotta v�ltyt s�hk�iskulta, �l� kytke pienj�nnitteisi� SELV-suojapiirej� puhelinverkkoj�nnitett� (TNV) k�ytt�viin virtapiireihin. LAN-portit sis�lt�v�t SELV-piirej� ja WAN-portit puhelinverkkoj�nnitett� k�ytt�vi� piirej�. Osa sek� LAN- ett� WAN-porteista k�ytt�� RJ-45-liittimi�. Ole varovainen kytkiess�si kaapeleita.
Attention	Pour �viter une �lectrocution, ne raccordez pas les circuits de s�curit� basse tension (Safety Extra-Low Voltage ou SELV) � des circuits de tension de r�seau t�l�phonique (Telephone Network Voltage ou TNV). Les ports du r�seau local (LAN) contiennent des circuits SELV et les ports du r�seau longue distance (WAN) sont munis de circuits TNV. Certains ports LAN et WAN utilisent des connecteurs RJ-45. Raccordez les c�bles en prenant toutes les pr�cautions n�cessaires.
Warnung	Zur Vermeidung von Elektroschock die Sicherheits-Kleinspannungs-Stromkreise (SELV-Kreise) nicht an Fernsprechnetzspannungs-Stromkreise (TNV-Kreise) anschlie�en. LAN-Ports enthalten SELV-Kreise, und WAN-Ports enthalten TNV-Kreise. Einige LAN- und WAN-Ports verwenden auch RJ-45-Steckverbinder. Vorsicht beim Anschlie�en von Kabeln.
Avvertenza	Per evitare scosse elettriche, non collegare circuiti di sicurezza a tensione molto bassa (SELV) ai circuiti a tensione di rete telefonica (TNV). Le porte LAN contengono circuiti SELV e le porte WAN contengono circuiti TNV. Alcune porte LAN e WAN fanno uso di connettori RJ-45. Fare attenzione quando si collegano cavi.
Advarsel	Unng� � koble lavspenningskretser (SELV) til kretser for telenettspenning (TNV), slik at du unng�r elektrisk st�t. LAN-utganger inneholder SELV-kretser og WAN-utganger inneholder TNV-kretser. Det finnes b�de LAN-utganger og WAN-utganger som bruker RJ-45-kontakter. V�r forsiktig n�r du kobler kabler.
Aviso	Para evitar choques el�ctricos, n�o conecte os circuitos de seguran�a de baixa tens�o (SELV) aos circuitos de tens�o de rede telef�nica (TNV). As portas LAN cont�m circuitos SELV e as portas WAN cont�m circuitos TNV. Algumas portas LAN e WAN usam conectores RJ-45. Tenha o devido cuidado ao conectar os cabos.
�Advertencia!	Para evitar la sacudida el�ctrica, no conectar circuitos de seguridad de voltaje muy bajo (safety extra-low voltage = SELV) con circuitos de voltaje de red telef�nica (telephone network voltage = TNV). Los puertos de redes de �rea local (local area network = LAN) contienen circuitos SELV, y los puertos de redes de �rea extendida (wide area network = WAN) contienen circuitos TNV. En algunos casos, tanto los puertos LAN como los WAN usan conectores RJ-45. Proceda con precauci�n al conectar los cables.
Varning!	F�r att undvika elektriska st�tar, koppla inte s�kerhetskretsar med extra l�g sp�nning (SELV-kretsar) till kretsar med telefonn�tsp�nning (TNV-kretsar). LAN-portar inneh�ller SELV-kretsar och WAN-portar inneh�ller TNV-kretsar. Vissa LAN- och WAN-portar �r f�rsedda med RJ-45-kontakter. Iaktta f�rsiktighet vid anslutning av kablar.

Statement 1030—Equipment Installation


Warning	Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030
Waarschuwing	Deze apparatuur mag alleen worden ge�nstalleerd, vervangen of hersteld door bevoegd geschoold personeel.
Varoitus	T�m�n laitteen saa asentaa, vaihtaa tai huoltaa ainoastaan koulutettu ja laitteen tunteva henkil�kunta.
Attention	Il est vivement recommand� de confier l'installation, le remplacement et la maintenance de ces �quipements � des personnels qualifi�s et exp�riment�s.
Warnung	Das Installieren, Ersetzen oder Bedienen dieser Ausr�stung sollte nur geschultem, qualifiziertem Personal gestattet werden.
Avvertenza	Questo apparato pu� essere installato, sostituito o mantenuto unicamente da un personale competente.
Advarsel	Bare oppl�rt og kvalifisert personell skal foreta installasjoner, utskiftninger eller service p� dette utstyret.
Aviso	Apenas pessoal treinado e qualificado deve ser autorizado a instalar, substituir ou fazer a revis�o deste equipamento.
�Advertencia!	Solamente el personal calificado debe instalar, reemplazar o utilizar este equipo.
Varning!	Endast utbildad och kvalificerad personal b�r f� till�telse att installera, byta ut eller reparera denna utrustning.





Advarsel	Kun uddannede personer m� installere, udskifte komponenter i eller servicere dette udstyr.

Statement 1040—Product Disposal


Warning	Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040
Waarschuwing	Het uiteindelijke wegruimen van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen.
Varoitus	T�m� tuote on h�vitett�v� kansallisten lakien ja m��r�ysten mukaisesti.
Attention	La mise au rebut ou le recyclage de ce produit sont g�n�ralement soumis � des lois et/ou directives de respect de l'environnement. Renseignez-vous aupr�s de l'organisme comp�tent.
Warnung	Die Entsorgung dieses Produkts sollte gem�� allen Bestimmungen und Gesetzen des Landes erfolgen.
Avvertenza	Lo smaltimento di questo prodotto deve essere eseguito secondo le leggi e regolazioni locali.
Advarsel	Endelig kassering av dette produktet skal v�re i henhold til alle relevante nasjonale lover og bestemmelser.
Aviso	Deitar fora este produto em conformidade com todas as leis e regulamentos nacionais.
�Advertencia!	Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales.
Varning!	Vid deponering hanteras produkten enligt g�llande lagar och best�mmelser.





Aviso	O descarte definitivo deste produto deve estar de acordo com todas as leis e regulamenta��es nacionais.
Advarsel	Endelig bortskaffelse af dette produkt skal ske i henhold til g�ldende love og regler.

Statement 1045—Short-circuit Protection


Warning	This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. Statement 1045
Waarschuwing	Voor dit product moet kortsluitbeveiliging (overstroombeveiliging) deel uitmaken van de installatie in het gebouw. De installatie moet voldoen aan de nationale en lokale bedradingvoorschriften.
Varoitus	T�m� tuote vaatii suojauksen oikosulkuja (ylivirtaa) vastaan osana asennusta rakennukseen. Asenna ainoastaan kansallisten ja paikallisten johdotuss��nn�sten mukaisesti.
Attention	La protection de ce produit contre les courts-circuits (surtensions) doit �tre assur�e par la configuration �lectrique du b�timent. V�rifiez que l'installation a lieu uniquement en conformit� avec les normes de c�blage en vigueur au niveau national et local.
Warnung	F�r dieses Produkt ist eine Kurzschlu�sicherung (�berstromsicherung) erforderlich, die als Teil der Geb�udeinstallation zur Verf�gung gestellt wird. Die Installation sollte nur in �bereinstimmung mit den nationalen und regionalen Vorschriften zur Verkabelung erfolgen.
Avvertenza	Questo prodotto richiede una protezione contro i cortocircuiti, da fornirsi come parte integrante delle dotazioni presenti nell'edificio. Effettuare l'installazione rispettando le Norme CEI pertinenti.
Advarsel	Dette produktet krever beskyttelse mot kortslutninger (overspenninger) som en del av installasjonen. Bare installer utstyret i henhold til nasjonale og lokale krav til ledningsnett.
Aviso	Este produto requer prote��o contra curto-circuitos (sobreintensidade de corrente), que deve estar instalada nos edif�cios. Instale apenas de acordo com as normas de instala��o el�trica nacionais e locais.
Advertencia	Este producto necesita estar conectado a la protecci�n frente a cortacircuitos (sobretensiones) que exista en el edificio. Inst�lelo �nicamente en conformidad con las regulaciones sobre cableado, tanto locales como nacionales, a las que se tenga que atener.
Varning!	Denna produkt kr�ver att kortslutningsskydd (�verstr�m) tillhandah�lles som en del av byggnadsinstallationen. Installera bara i enlighet med nationella och lokala kabeldragningsbest�mmelser.





Aviso	Este produto requer uma prote��o contra curto-circuito (sobrecorrente) que deve fazer parte da instala��o do edif�cio. Fa�a a instala��o somente de acordo com as regulamenta��es de cabeamento nacionais e locais.
Advarsel	Dette produkt kr�ver beskyttelse mod kortslutning (overstr�m). Dette skal v�re en del elinstallationen i bygningen. Installation skal ske i overensstemmelse med nationale og lokale ledningsregler.

Statement 1071—Warning Definition


Warning	IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS
Waarschuwing	BELANGRIJKE VEILIGHEIDSINSTRUCTIES Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen. BEWAAR DEZE INSTRUCTIES
Varoitus	T�RKEIT� TURVALLISUUSOHJEITA T�m� varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin k�sittelet laitteistoa, huomioi s�hk�piirien k�sittelemiseen liittyv�t riskit ja tutustu onnettomuuksien yleisiin ehk�isytapoihin. Turvallisuusvaroitusten k��nn�kset l�ytyv�t laitteen mukana toimitettujen k��nnettyjen turvallisuusvaroitusten joukosta varoitusten lopussa n�kyvien lausuntonumeroiden avulla. S�ILYT� N�M� OHJEET
Attention	IMPORTANTES INFORMATIONS DE S�CURIT� Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entra�ner des blessures ou des dommages corporels. Avant de travailler sur un �quipement, soyez conscient des dangers li�s aux circuits �lectriques et familiarisez-vous avec les proc�dures couramment utilis�es pour �viter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de s�curit� traduites qui accompagnent cet appareil, r�f�rez-vous au num�ro de l'instruction situ� � la fin de chaque avertissement. CONSERVEZ CES INFORMATIONS
Warnung	WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen f�hren kann. Machen Sie sich vor der Arbeit mit Ger�ten mit den Gefahren elektrischer Schaltungen und den �blichen Verfahren zur Vorbeugung vor Unf�llen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen �bersetzung in den �bersetzten Sicherheitshinweisen, die zusammen mit diesem Ger�t ausgeliefert wurden. BEWAHREN SIE DIESE HINWEISE GUT AUF.
Avvertenza	IMPORTANTI ISTRUZIONI SULLA SICUREZZA Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento. CONSERVARE QUESTE ISTRUZIONI
Advarsel	VIKTIGE SIKKERHETSINSTRUKSJONER Dette advarselssymbolet betyr fare. Du er i en situasjon som kan f�re til skade p� person. F�r du begynner � arbeide med noe av utstyret, m� du v�re oppmerksom p� farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for � forhindre ulykker. Bruk nummeret i slutten av hver advarsel for � finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten. TA VARE P� DISSE INSTRUKSJONENE
Aviso	INSTRU��ES IMPORTANTES DE SEGURAN�A Este s�mbolo de aviso significa perigo. Voc� est� em uma situa��o que poder� ser causadora de les�es corporais. Antes de iniciar a utiliza��o de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos el�tricos e familiarize-se com as pr�ticas habituais de preven��o de acidentes. Utilize o n�mero da instru��o fornecido ao final de cada aviso para localizar sua tradu��o nos avisos de seguran�a traduzidos que acompanham este dispositivo. GUARDE ESTAS INSTRU��ES
�Advertencia!	INSTRUCCIONES IMPORTANTES DE SEGURIDAD Este s�mbolo de aviso indica peligro. Existe riesgo para su integridad f�sica. Antes de manipular cualquier equipo, considere los riesgos de la corriente el�ctrica y familiar�cese con los procedimientos est�ndar de prevenci�n de accidentes. Al final de cada advertencia encontrar� el n�mero que le ayudar� a encontrar el texto traducido en el apartado de traducciones que acompa�a a este dispositivo. GUARDE ESTAS INSTRUCCIONES
Varning!	VIKTIGA S�KERHETSANVISNINGAR Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utf�r arbete p� n�gon utrustning m�ste du vara medveten om farorna med elkretsar och k�nna till vanliga f�rfaranden f�r att f�rebygga olyckor. Anv�nd det nummer som finns i slutet av varje varning f�r att hitta dess �vers�ttning i de �versatta s�kerhetsvarningar som medf�ljer denna anordning. SPARA DESSA ANVISNINGAR





Advarsel	VIGTIGE SIKKERHEDSANVISNINGER Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. F�r du begynder arbejde p� udstyr, skal du v�re opm�rksom p� de involverede risici, der er ved elektriske kredsl�b, og du skal s�tte dig ind i standardprocedurer til undg�else af ulykker. Brug erkl�ringsnummeret efter hver advarsel for at finde overs�ttelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER

Statement 1074—Comply with Local and National Electrical Codes

Caution

Inline power circuits provide current through the communication cable. Use the Cisco provided cable or a minimum 24AWG communication cable.

Warning To ensure product stability, carefully follow installation instructions and secure all parts as instructed.

Cell Phone Interference Caution

Caution

Using a cell, mobile, or GSM phone, or two-way radio in close proximity to the Cisco TelePresence system might cause interference. For more information, refer to the manufacturer's documentation of the interfering device.

Declaration of Conformity for the European Community, Switzerland, Norway, Iceland, Romania, and Liechtenstein

With regard to Directives 73/23/EEC and 89/336/EEC, as amended by Directive 93/68/EEC

Statement 275—Declaration of Conformity with Regard to the Directives 73/23/EEC and 89/336/EEC as amended by Directive 93/68/EEC

For specifics about which standards have been applied, refer to the Declaration of Conformity.


English:	This equipment is in compliance with the essential requirements and other provisions of Directives 73/23/EEC and 89/336/EEC as amended by Directive 93/68/EEC.
Dansk:	Dette udstyr er i overensstemmelse med de ufravigelige hensyn og andre bestemmelser i direktiv 73/23/EEC og 89/336/EEC som �ndred i direktiv 93/68/EEC.
Deutsch:	Dieses Ger�t entspricht den wesentlichen Anforderungen und weiteren Bestimmungen der Richtlinien 73/23/EWG und 89/336/EWG mit der Erg�nzung durch Richtlinie 93/68/EWG.
Espa�ol:	Este equipo cumple con los requisitos esenciales y otras disposiciones de las Directrices 73/23/EEC y 89/336/EEC de acuerdo a las modificaciones de la Directriz 93/68/EEC.

Fran�ais:	Cet appareil remplit les principales conditions requises et autres dispositions des Directives 73/23/EEC et 89/336/EEC, modifi�es par la Directive 93/68/EEC.
�slenska:	�essir b�na�ur samr�mist l�gbo�num kr�fum og ��rum �kv��um tilskipana 73/23/EBE og 89/336/EBE, me� breytingum skv. tilskipun 93/68/EBE.
Italiano:	Questa apparecchiatura � conforme ai requisiti essenziali e altre disposizioni delle Direttive 73/23/EEC e 89/336/EEC modificate con la Direttiva 93/68/EEC.
Nederlands:	Deze apparatuur voldoet aan de belangrijkste eisen en andere voorzieningen van richtlijnen 73/23/EEC en 89/336/EEC zoals gewijzigd door richtlijn 93/68/EEC.
Norsk:	Dette utstyret samsvarer med de vesentligste kravene og andre regler i direktivene 73/23/EEC og 89/336/EEC samt i tilleggsdirektiv 93/68/EEC.
Portugu�s:	Este equipamento satisfaz os requisitos essenciais e outras provis�es das Directivas 73/23/EEC e 89/336/EEC, conforme amendados pela Directiva 93/68/EEC.
	[Product_Name]
Suomalainen:	T�m� laite on direktiivien 73/23/ETY ja 89/336/ETY (kuten muutettu direktiiviss� 93/68/ETY) keskeisten vaatimusten ja m��r�ysten mukainen.
Svenska:	Denna utrustning uppfyller de v�sentliga kraven och andra villkor i direktiven 73/23/EEC och 89/336/EEC enligt �ndringarna i direktiv 93/68/EEC.

Compliance and Safety Information

Regulatory Compliance

The Cisco TelePresence system meets the following regulatory compliance and safety standards:


Specification	Description
Regulatory Compliance	Products with the CE Marking indicate compliance with the 89/336/EEC and 73/23/EEC directives, which include the safety and EMC standards listed below.
Safety	UL 60950 CSA-C22.2 No. 60950 EN 60950 IEC 60950 AS/NZS 60950
EMC	FCC Part 15 (CFR 47) Class A ICES-003 Class A EN55022 Class A CISPR22 Class A VCCI Class A EN55024 EN50082-1 EN 61000-3-2 EN 61000-3-3 EN 61000-6-1 AS/NZ CISPR 22 Class A CISPR 24
Telecom (IP phones)	AS/ACIF S004
Korea approval for Projector is TNY-CTS-PRJTR (A)

EMC Class A Notices and Warnings

This section includes the EMC Class A warnings for the Cisco TelePresence system.

Class A Notice for FCC

Modifying the equipment without Cisco's authorization may result in the equipment's no longer complying with FCC requirements for Class A digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case users will be required to correct the interference at their own expense.

Class A Notice for Canada

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil num�rique de la classe A est conforme � la norme NMB-003 du Canada.

Statement 191—VCCI Class A Warning for Japan


Warning	This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions.

Statement 256—Class A Warning for Hungary


Warning	This equipment is a class A product and should be used and installed properly according to the Hungarian EMC Class A requirements (MSZEN55022). Class A equipment is designed for typical commercial establishments for which special conditions of installation and protection distance are used.

Statement 294—Class A Warning for Korea


Warning	This is a Class A Device and is registered for EMC requirements for industrial use. The seller or buyer should be aware of this. If this type was sold or purchased by mistake, it should be replaced with a residential-use type.

Obtaining Documentation

Cisco documentation and additional literature are available on Cisco.com. This section explains the product documentation resources that Cisco offers.

Cisco.com

You can access the most current Cisco documentation at this URL:

http://www.cisco.com/techsupport

You can access the Cisco website at this URL:

http://www.cisco.com

You can access international Cisco websites at this URL:

http://www.cisco.com/public/countries_languages.shtml

Product Documentation DVD

The Product Documentation DVD is a library of technical product documentation on a portable medium. The DVD enables you to access installation, configuration, and command guides for Cisco hardware and software products. With the DVD, you have access to the HTML documentation and some of the PDF files found on the Cisco website at this URL:

http://www.cisco.com/univercd/home/home.htm

The Product Documentation DVD is created monthly and is released in the middle of the month. DVDs are available singly or by subscription. Registered Cisco.com users can order a Product Documentation DVD (product number DOC-DOCDVD= or DOC-DOCDVD=SUB) from Cisco Marketplace at the Product Documentation Store at this URL:

http://www.cisco.com/go/marketplace/docstore

Ordering Documentation

You must be a registered Cisco.com user to access Cisco Marketplace. Registered users may order Cisco documentation at the Product Documentation Store at this URL:

http://www.cisco.com/go/marketplace/docstore

If you do not have a user ID or password, you can register at this URL:

http://tools.cisco.com/RPF/register/register.do

Documentation Feedback

You can provide feedback about Cisco technical documentation on the Cisco Technical Support & Documentation site area by entering your comments in the feedback form available in every online document.

Cisco Product Security Overview

Cisco provides a free online Security Vulnerability Policy portal at this URL:

http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html

From this site, you will find information about how to do the following:

•Report security vulnerabilities in Cisco products

•Obtain assistance with security incidents that involve Cisco products

•Register to receive security information from Cisco

A current list of security advisories, security notices, and security responses for Cisco products is available at this URL:

http://www.cisco.com/go/psirt

To see security advisories, security notices, and security responses as they are updated in real time, you can subscribe to the Product Security Incident Response Team Really Simple Syndication (PSIRT RSS) feed. Information about how to subscribe to the PSIRT RSS feed is found at this URL:

http://www.cisco.com/en/US/products/products_psirt_rss_feed.html

Reporting Security Problems in Cisco Products

Cisco is committed to delivering secure products. We test our products internally before we release them, and we strive to correct all vulnerabilities quickly. If you think that you have identified a vulnerability in a Cisco product, contact PSIRT:

•For emergencies only — security-alert@cisco.com

An emergency is either a condition in which a system is under active attack or a condition for which a severe and urgent security vulnerability should be reported. All other conditions are considered nonemergencies.

•For nonemergencies — psirt@cisco.com

In an emergency, you can also reach PSIRT by telephone:

•1 877 228-7302

•1 408 525-6532

Tip We encourage you to use Pretty Good Privacy (PGP) or a compatible product (for example, GnuPG) to encrypt any sensitive information that you send to Cisco. PSIRT can work with information that has been encrypted with PGP versions 2.x through 9.x.

Never use a revoked encryption key or an expired encryption key. The correct public key to use in your correspondence with PSIRT is the one linked in the Contact Summary section of the Security Vulnerability Policy page at this URL:

http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html

The link on this page has the current PGP key ID in use.

If you do not have or use PGP, contact PSIRT to find other means of encrypting the data before sending any sensitive material.

Product Alerts and Field Notices

Modifications to or updates about Cisco products are announced in Cisco Product Alerts and Cisco Field Notices. You can receive Cisco Product Alerts and Cisco Field Notices by using the Product Alert Tool on Cisco.com. This tool enables you to create a profile and choose those products for which you want to receive information.

To access the Product Alert Tool, you must be a registered Cisco.com user. (To register as a Cisco.com user, go to this URL: http://tools.cisco.com/RPF/register/register.do) Registered users can access the tool at this URL: http://tools.cisco.com/Support/PAT/do/ViewMyProfiles.do?local=en

Obtaining Technical Assistance

Cisco Technical Support provides 24-hour-a-day award-winning technical assistance. The Cisco Technical Support & Documentation website on Cisco.com features extensive online support resources. In addition, if you have a valid Cisco service contract, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not have a valid Cisco service contract, contact your reseller.

Cisco Technical Support & Documentation Website

The Cisco Technical Support & Documentation website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The website is available 24 hours a day at this URL:

http://www.cisco.com/techsupport

Access to all tools on the Cisco Technical Support & Documentation website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a user ID or password, you can register at this URL:

http://tools.cisco.com/RPF/register/register.do

Note Use the Cisco Product Identification Tool to locate your product serial number before submitting a request for service online or by phone. You can access this tool from the Cisco Technical Support & Documentation website by clicking the Tools & Resources link, clicking the All Tools (A-Z) tab, and then choosing Cisco Product Identification Tool from the alphabetical list. This tool offers three search options: by product ID or model name; by tree view; or, for certain products, by copying and pasting show command output. Search results show an illustration of your product with the serial number label location highlighted. Locate the serial number label on your product and record the information before placing a service call.

Tip Displaying and Searching on Cisco.com

If you suspect that the browser is not refreshing a web page, force the browser to update the web page by holding down the Ctrl key while pressing F5.

To find technical information, narrow your search to look in technical documentation, not the entire Cisco.com website. On the Cisco.com home page, click the Advanced Search link under the Search box and then click the Technical Support & Documentation.radio button.

To provide feedback about the Cisco.com website or a particular technical document, click Contacts & Feedback at the top of any Cisco.com web page.

Submitting a Service Request

Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and S4 service requests are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Service Request Tool provides recommended solutions. If your issue is not resolved using the recommended resources, your service request is assigned to a Cisco engineer. The TAC Service Request Tool is located at this URL:

http://www.cisco.com/techsupport/servicerequest

For S1 or S2 service requests, or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.

To open a service request by telephone, use the following number: US: 1 800 495-9121

For a complete list of Cisco TAC contacts, go to this URL:

http://www.cisco.com/techsupport/contacts

Definitions of Service Request Severity

To ensure that all service requests are reported in a standard format, Cisco has established severity definitions.

Severity 1 (S1)—An existing network is "down" or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.

Severity 2 (S2)—Operation of an existing network is severely degraded, or significant aspects of your business operations are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.

Severity 3 (S3)—Operational performance of the network is impaired while most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.

Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.

Obtaining Additional Publications and Information

Information about Cisco products, technologies, and network solutions is available from various online and printed sources.

•The Cisco Product Quick Reference Guide is a handy, compact reference tool that includes brief product overviews, key features, sample part numbers, and abbreviated technical specifications for many Cisco products that are sold through channel partners. It is updated twice a year and includes the latest Cisco channel product offerings. To order and find out more about the Cisco Product Quick Reference Guide, go to this URL:

http://www.cisco.com/go/guide

•Cisco Marketplace provides a variety of Cisco books, reference guides, documentation, and logo merchandise. Visit Cisco Marketplace, the company store, at this URL:

http://www.cisco.com/go/marketplace/

•Cisco Press publishes a wide range of general networking, training, and certification titles. Both new and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press at this URL:

http://www.ciscopress.com

•Packet magazine is the magazine for Cisco networking professionals. Each quarter, Packet delivers coverage of the latest industry trends, technology breakthroughs, and Cisco products and solutions, as well as network deployment and troubleshooting tips, configuration examples, customer case studies, certification and training information, and links to scores of in-depth online resources. You can subscribe to Packet magazine at this URL:

http://www.cisco.com/packet

•Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:

http://www.cisco.com/ipj

•Networking products offered by Cisco Systems, as well as customer support services, can be obtained at this URL:

http://www.cisco.com/en/US/products/index.html

•Networking Professionals Connection is an interactive website where networking professionals share questions, suggestions, and information about networking products and technologies with Cisco experts and other networking professionals. Join a discussion at this URL:

http://www.cisco.com/discuss/networking

•"What's New in Cisco Documentation" is an online publication that provides information about the latest documentation releases for Cisco products. Updated monthly, this online publication is organized by product category to direct you quickly to the documentation for your products. You can view the latest release of "What's New in Cisco Documentation" at this URL:

http://www.cisco.com/univercd/cc/td/doc/abtunicd/136957.htm

•World-class networking training is available from Cisco. You can view current offerings at this URL:

http://www.cisco.com/en/US/learning/index.html

CCVP, the Cisco Logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, Follow Me Browsing, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, iPhone, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, LightStream, Linksys, MeetingPlace, MGX, Networking Academy, Network Registrar, Packet, PIX, ProConnect, RateMUX, ScriptShare, SlideCast, SMARTnet, StackWise, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0612R)

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

� 2007 Cisco Systems, Inc. All rights reserved.
Printed in China PRC

Table Of Contents