|
Table A-1 shows the DTMF frequencies and hexadecimal values used for DTMF inpulsing and outpulsing.
Note Hexadecimal values used to represent DTMF digits in system DTMF digit commands and reports are contained in parentheses. |
Low Frequency | High Frequency | |||
---|---|---|---|---|
1209 | 1336 | 1477 | 1633 | |
697 | 1(1) | 2(2) | 3(3) | A(A) |
770 | 4(4) | 5(5) | 6(6) | B(B) |
852 | 7(7) | 8(8) | 9(9) | C(C) |
941 | S(E) | 0(0) | #(F) | D(D) |
Table A-2 shows the MF frequencies and hexadecimal values used for MF inpulsing and outpulsing.
Note Hexadecimal values used to represent MF digits in system MF digit commands and reports are contained in parentheses. |
Low Frequency | High Frequency | ||||
---|---|---|---|---|---|
900 | 1100 | 1300 | 1500 | 1700 | |
700 | 1(1) | 2(2) | 4(4) | 7(7) | ST3P(E) |
900 |
| 3(3) | 5(5) | 8(8) | STP(C) |
1100 |
|
|
| 6(6) | 9(9)KP(0) |
1300 |
|
|
|
| 0(A)ST2P(D) |
1500 |
|
|
|
| ST(B) |
Posted: Fri Aug 9 11:36:47 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.