Cisco 7000 processors provide new functionality and have different names than the interface cards used in other Cisco routers.
Table E-1 provides general conversion information. For example, the RP card on the Cisco 7000 provides the same general area of functionality as the CSC-MC+ and CSC-ENVM cards on other Cisco routers.
Interface Processor Conversion Table
Modular Products Card
|
Cisco 7000 Processors
|
Cisco 7000 Processor Options
|
---|
CSC/4
| RP (Route Processor)
|
|
CSC-ENVM
| RP (Route Processor)
|
|
CSC-MC+
| RP (Route Processor)
|
|
CSC-CCTL2
| SP (Switch Processor)
|
|
CSC-C2MEC
| EIP (Ethernet Interface Processor) CX-EIP2 CX-EIP4 CX-EIP6
| 2 ports 4 ports 6 ports
|
CSC-C2CTR
| TRIP (Token Ring Interface Processor) CX-TRIP4
| 4 ports
|
CSC-C2FCI(T)
| FIP (FDDI Interface Processor) CX-FIP-MM CX-FIP-SS CX-FIP-MS CX-FIP-SM
| Multimode-to-multimode Single mode-to-single mode Multimode-to-single mode Single mode-to-multimode
|
CSC-SCI
| FSIP (Fast Serial Interface Processor)
| 4 or 8 ports available for RS-232, RS-449, RS-530, V.35, and X.21
|
CSC-HSCI
| HIP (HSSI Interface Processor)
|
|