This section discusses the objectives, audience, organization, and conventions of the Communication Server Configuration Guide publication.
This publication describes the tasks necessary to configure and maintain your communication server. It includes task overviews, expanded descriptions of tasks, and comprehensive configuration examples. It does not provide complete command syntax information, and therefore must be used in conjunction with the Communication Server Command Reference publication.
See the Communication Server and Protocol Translator Connection Guide for information about making connections to communication servers.
This publication is intended primarily for users who will be configuring and maintaining communication servers, but are not necessarily familiar with tasks, the relationship between tasks, or the commands necessary to perform particular tasks.
This publication is divided into seven main parts. Each part comprises chapters describing related tasks or functions. The organization of parts and chapters in this publication matches the organization of parts and chapters in the Communication Sever Command Reference publication, except that this document does not contain appendixes. The parts in this publication are as follows:
- Part 1, "Product Introduction," provides an overview of communication server functionality and hardware configuration options, and gives you an overview of the communication server user interface.
- Part 2, "System & Interface Configuration & Management," contains chapters that instruct the system administrator how to perform basic system and interface configuration, monitoring, and management tasks.
- Part 3, "Wide-Area Networking," contains chapters about how to configure dial-on-demand routing (DDR), X.25, SMDS, and Frame Relay WAN software.
- Part 4, "Terminal Services," contains chapters about how to configure your communication server for terminal connections and terminal services, including Telnet, LAT, and TN3270.
- Part 5, "Telecommuting Services," contains chapters about how to configure your communication server to support telecommuting services, including SLIP, PPP, and XRemote.
- Part 6, "Routing Services," contains chapters that provide information and procedures for configuring and managing IP, IP routing, and IPX protocols for routing.
- Part 7, "Protocol Translation," contains a chapter about configuring your communication server to support protocol translation.
Software and hardware documentation uses the following conventions:
- The symbol ^ represents the key labeled Control.
- For example, the key combination ^D means hold down the Control key while you press the
D key.
- A string is defined as a nonquoted set of characters. For example, when setting up a community string for SNMP to "public," do not use quotes around the string, or the string will include the quotation marks.
Command descriptions use these conventions:
- Commands and keywords are in boldface font.
- Arguments for which you supply values are in italic font.
- Elements in square brackets ([ ]) are optional.
- Alternative but required keywords are grouped in braces ({ }) and separated by vertical bars (|).
Examples use these conventions:
- Examples that contain system prompts denote interactive sessions, indicating that the user enters commands at the prompt. The system prompt indicates the current command mode. For example, the prompt
router(config)#
indicates global configuration mode.
- Terminal sessions and information the system displays are in
screen
font.
- Information you enter is in
boldface screen
font.
- Nonprinting characters, such as passwords, are in angle brackets (< >).
- Default responses to system prompts are in square brackets ([ ]).
- Exclamation points (!) at the beginning of a line indicate a comment line.
| Caution Means reader be careful. You are capable of doing something that might result in equipment damage or loss of data. |
Note Means
reader take note. Notes contain helpful suggestions or references to materials not contained in this manual.