Router Provisioning

Table Of Contents

Router Provisioning

Router Provisioning from USB

Router Provisioning

This window tells you if SDM has detected a USB token or USB flash device connected to your router. You can click the Router Provisioning button to choose a configuration file from the USB token or USB flash device. The configuration file can be a CCCD file (on USB token or USB flash) or a .cfg file (on USB flash only).

CCCD refers to a boot configuration file. On USB tokens, a CCCD file is loaded using TMS software.

If you choose to provision your router this way, the configuration file from the USB token or USB flash device is merged with your router's running configuration file to create a new running configuration file.

Router Provisioning from USB

This window allows you to load a configuration file from a USB token or USB flash device connected to your router. The file will be merged with your router's running configuration file to create a new running configuration file.

To load a configuration file, follow these steps:

Step 1 Choose the device type from the drop-down menu.

Step 2 If the device type is a USB token, choose the USB token from the USB Token drop-down menu.

Step 3 If the device type is a USB token, enter the password to log in to the token in Token PIN.

Step 4 Enter the configuration file name in Filename, including the full path, or click Browse and choose the file from the File Selection window.

Step 5 If you want to preview the file, click Preview File to display the contents of the file in the details pane.

Step 6 Click OK to load the chosen file.