|
|
Table Of Contents
BGP Configuration Using Peer Templates
BGP Configuration Using Peer Templates
A peer template is a configuration pattern that can be applied to neighbors that share policies. Peer templates are reusable, support inheritance, and improve the flexibility and enhance the capability of neighbor configurations. Peer templates also provide an alternative to peer group configuration and overcome some limitations of peer groups. BGP peer routers that use peer templates also benefit from automatic updates to group configurations. Network operators no longer need to configure peer groups in BGP, and the network can benefit from improved configuration flexibility and faster convergence.
Configuration Information
Configuration information is included in the "Configuring a Basic BGP Network" module of the Cisco IOS BGP Configuration Guide, Release 12.4T, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tbgp_c/t_brbbas.htm
The following sections provide information about this feature:
•
Peer Templates
•
•
For a complete list of features included in the "Configuring a Basic BGP Network" module, see the Feature Information table located toward the end of the module.
Command Reference Information
Release 12.2SB
Detailed information about commands is included in the Cisco IOS IP Routing Protocols Command Reference, Release 12.2SB, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/cr/sbirp_r/index.htm
Release 12.2SR
Detailed information about commands is included in the Cisco IOS IP Routing Protocols Command Reference, Release 12.2SR, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/cr/sbirp_r/index.htm
Release 12.4T
Detailed information about commands is included in the Cisco IOS IP Routing Protocols Command Reference, Release 12.4T, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcr/tirp_r/index.htm
Master Commands Lists
Cisco IOS master commands lists provide an alphabetical list of all Cisco IOS commands in a Cisco IOS release.
Cisco IOS new, modified, removed, and replaced commands lists provide an alphabetized list of all new, modified, removed, and replaced commands in a Cisco IOS release.
Release 12.2SB
Cisco IOS Master Commands List, Release 12.2SB, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/122sbrln/122sbix.htm
Release 12.2SR
Cisco IOS Master Commands List, Release 12.2SR, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sr/122srmdx/122sridx.htm
Release 12.4T
Cisco IOS Master Commands List, Release 12.4T, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124mindx/124htix.htm
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2007 Cisco Systems, Inc. All rights reserved.
Posted: Thu Sep 13 21:33:32 PDT 2007
All contents are Copyright © 1992--2007 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.
