|
|
Table Of Contents
ICMP Unreachable Rate Limiting User Feedback
ICMP Unreachable Rate Limiting User Feedback
The ICMP Unreachable Rate Limiting User Feedback feature enables you to clear and display packets that have been discarded because of an unreachable destination and to configure a threshold interval for triggering error messages. When message logging is generated, it displays on your console.
Configuration Information
Configuration information is included in the "Configuring IP Services" module of the Cisco IOS IP Application Services Configuration Guide, Release 12.4T, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tiapp_c/tichipip.htm
The following sections provide information about this feature:
•
ICMP Overview
•
•
•
For a complete list of features included in the "Configuring IP Services" module, see the Feature Information Table located toward the end of the module.
Command Reference Information
Command reference information is included in the Cisco IOS IP Application Services Command Reference, Release 12.2SB, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/cr/sbiap_r/index.htm
New or Modified Commands
The following commands are new or modified for this feature:
•
•
•
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2006 Cisco Systems, Inc. All rights reserved.
Posted: Mon Dec 4 18:58:16 PST 2006
All contents are Copyright © 1992--2006 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.
