|
|
Table Of Contents
Cisco IOS Dial Services Configuration Guide: Terminal Services, Release 12.1
Symbols A B C D E F G H I K L M N O P Q R S T U V W X
Symbols
? command xli
A
AAA/TACACS+
ARA authentication
enabling DTC-563
PPP authentication
undefined list name
(caution) DTC-246
aaa authentication arap command DTC-563
aaa authentication nasi command DTC-143
aaa authentication ppp command DTC-246, DTC-346
abbreviating commands
context-sensitive help xli
absolute-timeout command DTC-465
access-class command DTC-430, DTC-482
access control
AppleTalk DTC-566
ARA DTC-560
asynchronous interfaces
(example) DTC-37
Legacy DDR
configuring DTC-319to DTC-320, DTC-350
outgoing calls
access-list command DTC-173, DTC-303, DTC-307
access lists
DDR
DECnet DTC-306
IP DTC-304
transparent bridging DTC-303
VINES DTC-306
XNS DTC-307
DECnet
dialer profiles DTC-380
dialer groups DTC-308
dialer profiles
Ethernet type codes DTC-383
VINES DTC-380
IP
dialer profiles DTC-381
LAT
configuration (example) DTC-434
defining DTC-429
Legacy DDR
interface assignment DTC-319, DTC-350
X.29
configuring DTC-481
XNS
dialer profiles DTC-382
access restrictions
asynchronous interfaces DTC-37
addresses
asynchronous interfaces DTC-71
default asynchronous
configuring DTC-71
dynamic asynchronous
configuring DTC-71
IP
pooling DTC-481
symbolic host X.25
configuring DTC-483
unnumbered interfaces DTC-70
(example) DTC-42
addressing
dynamic
configuring DTC-42
address pooling
DHCP DTC-252
global default mechanism
local pooling DTC-253
AppleTalk
access control DTC-566
cable ranges
configuration (example) DTC-574
DDR
configuring DTC-305
dialer profiles
configuring DTC-379
discovery mode
configuration (example) DTC-575
extended interfaces
configuration (example) DTC-574
interfaces
monitoring DTC-568
internal network advertisements DTC-558
MacIP clients
monitoring DTC-568
MacIP servers
monitoring DTC-568
networks
monitoring DTC-567
PPP
configuring DTC-280
services
enabling DTC-558
traffic statistics
monitoring DTC-568
zone information (table) DTC-568
zones
PPP access (example) DTC-40
appletalk address command DTC-256
appletalk cable-range command DTC-256
appletalk client-mode command DTC-280
AppleTalk Control Protocol
AppleTalk Remote Access
appletalk send-rtmps command DTC-558
appletalk service command DTC-558
appletalk virtual-net command DTC-280
ARA
access control DTC-560
automatic sessions
starting DTC-74
automatic session startup
configuring DTC-559
configuration (example) DTC-572
configuring DTC-558
connectivity prerequisites DTC-555
dedicated line (example) DTC-573
guests
disabling DTC-561
Inter-Poll verification tool DTC-567
Kerberos security authentication DTC-565
monitoring DTC-567
multiuse line (example) DTC-572
overview DTC-555
PPP
configuring DTC-556
security
CCL scripts
internal username authentication DTC-561
TACACS/ARA DTC-562
TACACS username authentication (example) DTC-575
servers
cabling and connections (example) DTC-557
configuration (example) DTC-571
lines, configuring DTC-557
modems, configuring DTC-557
monitoring DTC-567
tunneling DTC-471
one-step DTC-479
X.25 client to AppleTalk network (example) DTC-576
arap dedicated command DTC-559
arap enable command DTC-558
arap net-access-list command DTC-561
arap network command DTC-558, DTC-566
arap noguest command DTC-561
arap require-manual-password command DTC-560
arap timelimit command DTC-559
arap use-tacacs command DTC-563
arap warningtime command DTC-559
arap zonelist command DTC-560
ARP
table
verifying entries DTC-568
async-bootp command DTC-69
async default routing command DTC-73
async dynamic address command DTC-72
async dynamic routing command DTC-73
asynchronous group interfaces
CHAP authentication DTC-30, DTC-31
IP unnumbered DTC-31
PAP authentication DTC-30, DTC-31
PPP encapsulation DTC-30, DTC-31
verifying DTC-32
asynchronous host mobility
configuring DTC-281
asynchronous host roaming
(example) DTC-281
asynchronous interfaces
addressing methods
configuring DTC-72
description DTC-71
bandwidth
configuring optimal DTC-78
broadcasts on DTC-277
chat scripts
configuring DTC-87
configuration options DTC-28
dedicated network mode
(example) DTC-37
default addresses
configuring DTC-71
dynamic addresses
configuring DTC-71
dynamic addressing
(example) DTC-42
group and member
(examples) DTC-37
IPX loopback interfaces DTC-279
low bandwidth DTC-275
modems
configuration (examples) DTC-80
network interface (example) DTC-43
protocol functions
header compression DTC-489
keepalive updates DTC-489
vty lines DTC-487
routing configuration (example) DTC-277
TCP/IP header compression
(example) DTC-42
configuring DTC-78
troubleshooting DTC-79
asynchronous mode
low-speed serial interface DTC-70
async mode dedicated command DTC-72
async mode interactive command DTC-72, DTC-281
AT
modem attention commands DTC-98, DTC-112
AT&T
latched CSU loopback specification DTC-201
ATCP
PPP
enabling DTC-280
autocommand command DTC-77, DTC-137
autodetect encapsulation command DTC-172, DTC-235, DTC-237
autohangup command DTC-66
Autoselect
incoming protocol sensor DTC-74
autoselect command DTC-75, DTC-559
auxiliary ports
asynchronous serial interfaces
configuring DTC-73
B
backup delay command DTC-395
backup interface command DTC-394
backup interfaces
dialer profiles DTC-399
overview DTC-393
See also dial backup, serial interfaces, and serial interfaces
backup load command DTC-395
bandwidth
configuring optimal DTC-78
bandwidth on demand
load threshold DTC-323, DTC-353
banners
line numbers DTC-466
SLIP-PPP DTC-287
(example) DTC-289
tokens DTC-287
banner slip-ppp command DTC-287
baud rates
lines
configuring DTC-464
terminal
configuring DTC-463
binding
DNIS-plus-ISDN-subaddress DTC-160
BOOTP
requests
configuring DTC-69
description DTC-276
bridge group command DTC-320, DTC-350, DTC-384
bridge protocol command DTC-303, DTC-383
broadcasts
asynchronous interfaces DTC-277
IP
asynchronous serial traffic over UDP DTC-135
buffers command DTC-152
bundles
MLP Inverse Multiplexer DTC-264
busy-message command DTC-415
C
cable ranges
AppleTalk
configuring DTC-575
calls
analog
robbed-bit signalling DTC-166
analog modem DTC-4
asynchronous character steam DTC-4
channel-associated signalling DTC-166
circuit-switched digital DTC-3
incoming
V.120 asynchronous DTC-234
ISDN not end-to-end DTC-158
outgoing
access control DTC-173, DTC-319
prevent incoming DTC-68
X.3 PAD
XOT, enabling DTC-547
carrier wait time
dialer profiles DTC-378
cas-group command DTC-186
cas-group timeslots command DTC-181
cause codes
ISDN DTC-159
cautions
undefined AAA/TACACS+ list DTC-246
usage in text xxxv
CCO
accessing xxxvi
definition xxxvi
central sites
protocol translation DTC-502
Challenge Handshake Authentication Protocol
channel-associated signalling
(examples) DTC-214
analog calls on Cisco AS5200 DTC-180
channelized E1
channel-associated signalling
analog calls DTC-180
channel groups
(example) DTC-206
serial interfaces DTC-200
testing DTC-199
troubleshooting interface loopbacks DTC-200, DTC-201
channel uses DTC-166
controllers
troubleshooting DTC-197, DTC-199
description DTC-15
ISDN PRI
configuring DTC-168
D-channel number DTC-168
PRI groups
(example) DTC-206
R2 signalling DTC-180
testing channel group DTC-199
channelized T1
channel groups
(example) DTC-206
serial interfaces DTC-200
troubleshooting interface loopbacks DTC-200, DTC-201
channel uses DTC-166
controllers
troubleshooting DTC-198, DTC-199
description DTC-15
ISDN PRI
configuring DTC-169
D-channel number DTC-170
local loopback and ping DTC-198
PRI groups
(example) DTC-206
switched 56K DTC-181
channels
ISDN 2 B + D
BRI DTC-16
logical relationship DTC-17
PRI DTC-17
CHAP
challenge DTC-491
challenge packet DTC-245
description DTC-491
enabling DTC-491
encrypted password (examples) DTC-265
PAP authentication order DTC-246
response DTC-245
chat-script command DTC-89
chat scripts
asynchronous lines DTC-317
escape sequences
(table) DTC-89
expect-send pairs
(table) DTC-89
naming conventions DTC-88
overview DTC-78
Cisco 2520-2523 routers
slow-speed serial interfaces
configuring DTC-70
Cisco 3000
protocol translator (example) DTC-500
Cisco 700 and 800
Combinet Proprietary Protocol DTC-171, DTC-228
protocols supported DTC-229
Cisco 7500 series routers, MLP Inverse Multiplexer DTC-263
Cisco AS5200
channelized E1/T1
channel uses DTC-166
R1 modified signalling
configuring DTC-194
Cisco AS5300
R1 modified signalling
configuring DTC-194
Cisco AS5800
R1 modified signalling
configuration (examples) DTC-219
Cisco Connection Online
Cisco IOS
saving configuration changes xliv
clear dialer command DTC-327, DTC-357, DTC-385
clear interface virtual-access command DTC-492
clear line command DTC-79
clear modem at-mode command DTC-113
client server
X Window System DTC-448
clns filter-set command DTC-307
clock rate command DTC-50
clocks
internal
enabling DTC-48
transmit
invert signal DTC-49
clock source command DTC-52, DTC-181, DTC-186
Combinet
command control language scripts
See ARA, security, CCL scripts and TACACS, CCL scripts
command modes
dedicated network interfaces
configuring DTC-72
interactive sessions
configuring DTC-72
summary (table) xl
command syntax conventions
Cisco IOS documentation xxxvi
communication servers
remote
automatic dialing DTC-62
compressions
HDLC DTC-47
Microsoft PPP DTC-249
Multilink PPP DTC-163
predictor (example) DTC-163
Stacker DTC-163
(example) DTC-163
compress predictor command DTC-248
compress stac command DTC-48, DTC-248
configuration, saving xliv
configure terminal command DTC-186
connect command DTC-416
connections
ARA
AppleTalk network DTC-567
dial-in
testing DTC-60
direct modem
(example) DTC-135
full duplex DTC-415
IPX dial-out DTC-143
LAT
configuring DTC-431
host-initiated DTC-423, DTC-426
Legacy X.3 PAD DTC-544
LLC2
NetBEUI clients over PPP DTC-283
modems
stopping DTC-65
troubleshooting DTC-134
NASI DTC-143
PPP DTC-282
printers
configuration (example) DTC-77
configuring DTC-68
protocol translations
monitoring DTC-494
quiet asynchronous tunnel DTC-417
resuming X.3 (examples) DTC-546
reverse modem DTC-68
rlogin DTC-417
rotary groups DTC-77
semipermanent ISDN
BRI DTC-156
Germany, Australia DTC-226
PRI DTC-173
SLIP DTC-283
TCP
monitoring DTC-418
TCP connection attempt time
configuring DTC-285
Telnet DTC-417
TN3270 DTC-444
transparent TCP DTC-418, DTC-419
X.28 PAD DTC-533
controller e1 command DTC-168, DTC-181
controllers
E1
description DTC-14
T1
description DTC-14
controller t1 command DTC-169, DTC-186
CRC
16-bit default DTC-48
32-bit
enabling DTC-48
configuring DTC-48
crc4 command DTC-51
crc command DTC-48
CSU loopbacks
AT&T specification DTC-201
latched DTC-201
cyclic redundancy check
D
data bits
configuring DTC-464
databits command DTC-463
data compression
modem negotiation DTC-79, DTC-80
data terminal ready
dce-terminal-timing enable command DTC-50
DDR
access lists
dialer groups DTC-308
routed protocols, configuring DTC-304
AppleTalk
configuring DTC-305
bridged protocols DTC-301
chat scripts
configuring DTC-87
enabling DTC-92
configuration (examples) DTC-308to DTC-311
decision flowchart DTC-297
DECnet
configuring DTC-306
control packets DTC-306
dependent implementation decisions DTC-300
fast switching DTC-353
independent implementation decisions DTC-299
interesting packets DTC-319
interfaces DTC-301, DTC-302, DTC-315
IP
configuring DTC-304
IPX
configuring DTC-305
ISDN PRI
configuration (example) DTC-204
ISO CLNS
configuring DTC-307
routed protocols DTC-301, DTC-303
transparent bridging DTC-302
permit all packets DTC-303
type code access DTC-303
uninteresting packets DTC-319
VINES
configuring DTC-306
XNS
configuring DTC-307
debug async command DTC-79
debug dialer command DTC-161, DTC-178, DTC-229
debug isdn events command DTC-161, DTC-178
debug isdn q921 command DTC-229
debug isdn q931 command DTC-59, DTC-229
debug modem command DTC-59
debug modem csm command DTC-59
debug ppp chap command DTC-79
debug ppp error command DTC-79
debug ppp negotiation command DTC-79
debug ppp packet command DTC-79
debug q921 command DTC-161, DTC-178
debug q931 command DTC-161, DTC-178
debug udptn command DTC-138
DECnet
DDR
access lists DTC-306
configuring DTC-306
control packets DTC-306
dialer profiles
access lists DTC-380
configuring DTC-380
control packets DTC-380
dedicated mode
asynchronous interfaces
configuring DTC-72
configuration (example) DTC-37
default form of a command
using xliii
DHCP
address pooling DTC-480
client proxy
enabling DTC-480
configuration (examples) DTC-39
IP address pooling
configuring DTC-252
local IP address pool
(example) DTC-39
dial backup
dialer profiles DTC-399to DTC-401
backup interfaces DTC-400
dialer interfaces, configuring DTC-400
ISDN BRI (example) DTC-401
physical interfaces DTC-400
ISDN channels DTC-396
load threshold exceeded (examples) DTC-397
load threshold reached (examples) DTC-397
primary line down (examples) DTC-398
serial interfaces DTC-393to DTC-397
Dialed Number Identification Service
dialer dtr command DTC-316
dialer enable-timeout command DTC-322, DTC-352
dialer fast-idle command DTC-321, DTC-351, DTC-378
dialer-group command DTC-156, DTC-173, DTC-258, DTC-259, DTC-320, DTC-350, DTC-377, DTC-400
dialer hold-queue command DTC-323, DTC-353
dialer idle-timeout command DTC-223, DTC-258, DTC-259, DTC-321, DTC-351, DTC-378
dialer in-band command DTC-257, DTC-259, DTC-316
dialer interfaces
dialer isdn command DTC-378
dialer isdn short-hold command DTC-223
dialer-list command DTC-156, DTC-173, DTC-308
dialer-list protocol bridge command DTC-303, DTC-319, DTC-320, DTC-383
dialer-list protocol command DTC-308, DTC-377
dialer-list protocol list command DTC-308
dialer load-threshold
Multilink PPP DTC-259
async interface DTC-258
BRI, configuring single DTC-258
BRIs in rotary group DTC-259
dialer load-threshold command DTC-258, DTC-259, DTC-323, DTC-353
dialer map-class
description DTC-375
dialer map command DTC-317
dialer map modem-script system-script command DTC-318, DTC-344, DTC-349
dialer map name command DTC-347
dialer map name spc command DTC-156, DTC-173, DTC-226
dialer map name speed command DTC-156, DTC-173
dialer pool
dialer profiles
backup interfaces DTC-399
physical interfaces DTC-376
priorities DTC-376
dialer pool command DTC-377, DTC-400
dialer pool-member command DTC-379
dialer priority command DTC-322, DTC-352
dialer profiles
AppleTalk
configuring DTC-379
bridging protocols DTC-382
central site
multiple remote networks (example) DTC-385
configuring DTC-377
DECnet
configuring DTC-380
control packets DTC-380
dialer interfaces
description DTC-375
remote destination and map class DTC-377
dialer map-class
description DTC-375
dialer pool
description DTC-375
dialer interfaces DTC-376
physical interfaces DTC-376
reserved channel DTC-375
dialing pool reserved channels DTC-379
IP
addresses
remote network node 1
configuring DTC-381
IPX
configuring DTC-381
ISDN BRI
two leased lines (example) DTC-387, DTC-401
map class DTC-378
configuring DTC-378
fast idle timer DTC-378
ISDN requirements DTC-378
wait for carrier time DTC-378
Multilink PPP configuration with DTC-271
physical interfaces
routing protocols DTC-382
source address validation
disabling DTC-300
transparent bridging
access control DTC-383
bridging protocols, configuring DTC-383
interesting packets DTC-383
interfaces, configuring DTC-384
type code access DTC-383
VINES
configuring DTC-380
XNS
configuring DTC-382
Dialer Profiles feature
overview DTC-373
dialer remote-name command DTC-400
dialer rotary
Multilink PPP DTC-259
dialer rotary-group command DTC-257, DTC-259, DTC-345, DTC-348
dialer rotary groups
(example) DTC-366
bandwidth on demand
load threshold DTC-353
interfaces
assigment DTC-348
leader DTC-343
dialer-string class command DTC-377, DTC-400
dialer string command DTC-317, DTC-318, DTC-349
dialer wait-for-carrier-time command DTC-322, DTC-352, DTC-378
Dialer Watch
addresses
configuring DTC-405
benefits DTC-404
configuration (examples) DTC-406
configuring DTC-404
dial backup DTC-393
interfaces
disable timer DTC-405
primary DTC-405
secondary DTC-405
interface status DTC-405
overview DTC-403
dialer watch-disable command DTC-405
dialer watch-group command DTC-405
dialer watch-list command DTC-405
dialing
automatic modem
configuring DTC-62
DTR DTC-316
configuration (example) DTC-334
incoming calls, configuring DTC-317
outgoing calls, configuring DTC-316
remote interface DTC-316, DTC-317
remote passive interface DTC-316, DTC-317
X.25 (example) DTC-371
X.25 encapsulation (example) DTC-340
Legacy DDR
outgoing calls, configuring DTC-317
display server
X Window System DTC-448
DNIS
encapsulation types based on DTC-154
ISDN subaddress binding DTC-160
(example) DTC-164
documentation conventions
Cisco IOS xxxv
dte-invert-txc command DTC-50
dynamic addressing
configuring DTC-42
Dynamic Host Control Protocol
Dynamic Multiple Encapsulations
description DTC-150
E
ear and mouth signalling
description DTC-14
EBCDIC
IBM 3270 terminal character format DTC-436
mapping control DTC-443
encapsulation hdlc command DTC-48
encapsulation lapb command DTC-327, DTC-357
encapsulation ppp command DTC-244, DTC-246, DTC-248, DTC-318, DTC-347, DTC-349, DTC-377, DTC-379, DTC-400
encapsulations
automatic detection DTC-228
dynamic multiple DTC-150, DTC-374
ISDN LAPB-TA autodetect DTC-237
supported DTC-22
synchronous serial DTC-47
V.120 dynamic detection DTC-235
encapsulation x25 command DTC-326, DTC-356
exec command DTC-73
EXEC process
disabling DTC-73
enabling DTC-73
exec-timeout command DTC-73
exit command DTC-186
Extended Binary-Coded Decimal Interchange Code
F
fast switching
IP
disabling DTC-286
enabling DTC-286
Legacy DDR
fonts
DECwindows
access DTC-451
remote access DTC-449
X terminal nonresident
access DTC-451
Frame Relay
DDR
configuration overview DTC-355
restrictions DTC-355
dialup connections DTC-324, DTC-354
LAT-to-LAT protocol translation (example) DTC-506
Legacy DDR
configuration overview DTC-325
interfaces supported DTC-324
restrictions DTC-325
framing command DTC-186
framing crc4 command DTC-168, DTC-181
framing esf command DTC-169
G
Germany
ISDN semipermanent connection support DTC-156
global configuration mode
summary xl
group asynchronous interfaces
configuring DTC-28
group-range command DTC-9, DTC-38
H
HDLC
compressions
Stacker DTC-47
help command xli
Hong Kong
ISDN Sending Complete information element DTC-159, DTC-174
host names
symbolic
configuring X.25 DTC-483
hunt group
I
idle timer
Multilink PPP
dialer load thresholds DTC-258
dialer timeout DTC-258, DTC-259
ignore-dcd command DTC-50
IGRP
dial-in router DTC-44
interface bri command DTC-153, DTC-234
interface configuration mode
summary xl
interface dialer command DTC-259, DTC-377, DTC-400
interface multilink command DTC-264
interfaces
asynchronous
configuration options DTC-8
configuring DTC-7
description DTC-28
logical constructs DTC-8
Multilink PPP DTC-257
compared to lines DTC-8
DDR priority DTC-356
dial backup
dialer profiles DTC-399
dialer DTC-375
description DTC-11
downtime, enabling DTC-352
logical entity DTC-315, DTC-343
serial address DTC-345
dialer rotary group assignment DTC-348
group asynchronous
configuring DTC-28
ISDN BRI
Multilink PPP DTC-258
ISDN PRI DTC-166
low-speed serial DTC-70
peer address allocation methods DTC-250
physical DTC-376
dialer pool, configuring DTC-375
point-to-point
IP address pooling DTC-250
relationship to lines DTC-20
synchronous
Multilink PPP DTC-256
synchronous serial
configuration (examples) DTC-52
configuring DTC-45
DTR signal pulsing DTC-49
enabling DTC-46
encapsulation methods DTC-47
ignore DCD signal DTC-49
unnumbered DTC-70
virtual asynchronous DTC-233
virtual templates
description DTC-10
interface serial command DTC-170, DTC-186, DTC-230, DTC-234
interface virtual-template command DTC-475, DTC-477
internal clock
Internet Packet Exchange Protocol
Internet Protocol
inverse multiplexing
Multilink PPP (example) DTC-269
invert-transmit-clock command DTC-49
IP
address pooling DTC-481
assignment method DTC-252
concept DTC-250
DHCP DTC-252
global default mechanism DTC-252to DTC-253
interfaces supported DTC-251
local address pooling DTC-253
peer address allocation methods DTC-250
per-interface options DTC-253
precedence rules DTC-251
broadcasts
asynchronous serial traffic over UDP DTC-135
fast switching
DDR DTC-324
disabling DTC-286
enabling DTC-286
Legacy DDR DTC-354
IP-SLIP
(example) DTC-40
LAT-to-LAT protocol translations
configuring DTC-504
performance parameters
configuring DTC-284
PPP
configuring over DTC-278
PPP-IP
(example) DTC-40
route cache invalidation DTC-287
ip address command DTC-256, DTC-259, DTC-264, DTC-377
ip address-pool command DTC-252, DTC-253, DTC-480, DTC-481
ip alias command DTC-415
ip cache-invalidate-delay command DTC-287
IPCP
ip dhcp-server command DTC-252
IP header compression
See TCP/IP, header compression
ip host command DTC-82, DTC-133
ip local pool command DTC-253, DTC-481
IP multicast routing
asynchronous serial traffic over UDP DTC-135
IP-PPP
enabling DTC-278
ip route-cache command DTC-286, DTC-324, DTC-354
ip route-cache distributed command DTC-324, DTC-354
ip routing command DTC-382
ip tcp chunk-size command DTC-415
ip tcp compression-connections command DTC-285
ip tcp header-compression command DTC-78, DTC-285
ip tcp synwait-time command DTC-285
ip telnet quiet command DTC-420
ip unnumbered command DTC-70
ip unnumbered ethernet command DTC-475, DTC-477
ip unnumbered loopback command DTC-400
IPX
configuring over PPP DTC-279
DDR
configuring DTC-305
dialer profiles
configuring DTC-381
fast switching
Legacy DDR DTC-354
header compression over PPP DTC-285
network numbers
(example) DTC-41
over PPP
dedicated network numbers DTC-279
loopback interfaces DTC-279
vty lines, configuring DTC-488
PPP
configuring DTC-278
loopback interfaces (example) DTC-41
ipx compression enable command DTC-286
IPXCP
ipx nasi-server enable command DTC-143
ipx network command DTC-256
ipx ppp-client loopback command DTC-279
ipx route-cache command DTC-381
ipx spx-idle-time command DTC-305, DTC-381
ipx spx-spoof command DTC-305, DTC-381
ipx watchdog-spoof command DTC-305, DTC-381
ISDN
128 kbps leased-line service
(example) DTC-232
configuring DTC-227
interface characteristics DTC-227
Advice of Charge DTC-222to DTC-223
BRI and dialer profiles (example) DTC-230
call history DTC-223
destination DTC-222
dialer map class DTC-223
dialer profiles DTC-222
ISDN interface, configuring DTC-222
Legacy DDR DTC-222
outgoing calls DTC-222
overview DTC-222
PRI and legacy DDR (example) DTC-230
short-hold mode, configuring DTC-222
switch types DTC-222
B channel
ascending call order (example) DTC-206
call order default DTC-177
outgoing call order DTC-177
call history DTC-223
cause codes DTC-159
channels
disabling DTC-225
channel service states DTC-226
DNIS-plus-ISDN-subaddress binding
(example) DTC-387
encapsulations
automatic detection DTC-228
dynamic multiple DTC-387
interfaces
monitoring DTC-223
TEI DTC-173
LAPB-TA asynchronous traffic DTC-236
leased-line service
Germany and Japan DTC-227
multiple switch types DTC-149, DTC-151
configuration (example) DTC-161
PRI interfaces
configuring 1
restrictions DTC-176
alternate route index DTC-224
backup D-channel DTC-225, DTC-232
channelized T1 controllers (example) DTC-232
DDR configuration (example) DTC-232
PRI group DTC-224
primary D-channel DTC-225, DTC-231
service state (example) DTC-232
NFAS channel interface
configuring DTC-225
disabling DTC-225
NFAS groups
monitoring DTC-225
NFAS switch types DTC-224
semipermanent connections
Australia, Germany DTC-226
semipermanent connection support DTC-173
special signalling
(examples) DTC-229
troubleshooting DTC-229
subaddress binding DTC-160
isdn all-incoming-calls-v120 command DTC-234
isdn answer1 command DTC-157
isdn answer2 command DTC-158
isdn bchan-number-order command DTC-177
ISDN BRI
asynchronous access DTC-235
called party number
verifying DTC-157
caller ID screening DTC-157
calling line identification
configuring DTC-157
calling number identification DTC-158
compression (examples) DTC-163
configuration buffers
configuring DTC-152
verifying DTC-152
configuration self-tests DTC-161
dialer rotary group (example) DTC-162
encapsulations
configuring DTC-154
fast rollover delay
configuring DTC-158
global and interface switch type (example) DTC-161
interfaces
configuration (example) DTC-203
configuring DTC-149, DTC-151, DTC-153
monitoring DTC-160
leased-line service DTC-226
128 kbps DTC-227
normal speeds DTC-227
platform support DTC-227
line configuration requirements DTC-148
line speed
configuring DTC-158
MLP and compression (example) DTC-163
MTU size DTC-152
network address
configuring DTC-155
point-to-multipoint service DTC-148
point-to-point service DTC-148
semipermanent connections DTC-156
Sending Complete information element
Taiwan, Hong Kong DTC-159
switch types
configuration information DTC-148
configuring DTC-151
TEI interfaces
configuration (example) DTC-203
configuring DTC-173
defaults DTC-174
TEI negotioation timing
configuring DTC-156
troubleshooting DTC-160
V.120 support
PPP on virtual terminal lines DTC-235
voice calls
incoming (example) DTC-164
outgoing (example) DTC-164
isdn caller command DTC-157
isdn calling-number command DTC-158, DTC-174
ISDN cause code override DTC-159
isdn disconnect-cause command DTC-159
isdn incoming-voice modem command DTC-174
ISDN LAPB-TA
configuration (example) DTC-239
encapsulation autodetection DTC-237
overview DTC-236
isdn leased-line bri 128 command DTC-227
isdn leased-line bri command DTC-227
ISDN Non-Facility Associated Signalling
isdn not-end-to-end command DTC-158, DTC-159
ISDN PRI
(examples) DTC-202
analog calls
configuring DTC-174
B channel
ascending call order (example) DTC-206
outgoing call order DTC-177
calling number identification DTC-174
channel groups
(example) DTC-206
channelized E1 controllers
configuring DTC-168
DDR configuration (example) DTC-205
slot and port numbering DTC-168
channelized T1 controllers
configuring DTC-169
DDR configuration (example) DTC-204
slot and port numbering DTC-169
configuration self-tests DTC-177
D-channel serial interface number DTC-168, DTC-170
DDR configuration requirement DTC-167
encapsulations
Frame Relay DTC-171
X.25 DTC-171
Legacy DDR interface
line configuration requirements DTC-167
multiple switch types
(example) DTC-206
configuring DTC-176
restrictions DTC-176
NSF call-by-call (example) DTC-203
point-to-multipoint service DTC-167
PRI groups
(example) DTC-206
semipermanent connections
Australia DTC-173
Sending Complete information element
Taiwan, Hong Kong DTC-174
serial interfaces
configuring DTC-170
isdn sending-complete command DTC-160, DTC-174
isdn service command DTC-225
isdn spid1 command DTC-154
isdn spid2 command DTC-154
isdn switch-type command DTC-151, DTC-168, DTC-169, DTC-176, DTC-227
isdn tei command DTC-157, DTC-174
ISO CLNS
DDR
access groups DTC-307
configuring DTC-307
K
keepalive command DTC-264
keepalives
LAT timers DTC-428
PPP
enabling LQM DTC-247
translate option DTC-475
Kerberos security
ARA
enabling DTC-565
keyboard emulations
IBM 7171
(example) DTC-445
keymap command DTC-442
keymaps
alternate DTC-443
line characteristics DTC-443
selection priority DTC-439
selection process (figure) DTC-440
keymap-type command DTC-442
keystroke
suspend-session DTC-134
L
L2F
overview DTC-473
tunneling technology DTC-473
virtual templates DTC-473
LAPB
DDR
configuring DTC-357
LAT
access lists (example) DTC-434
basic services
configuration (example) DTC-432
configuring DTC-425
connections
configuration (examples) DTC-435
host-initiated DTC-423, DTC-426
stopping DTC-431
VMS host DTC-424
delay
set acknowledgment DTC-429
font selection DTC-451
group codes (example) DTC-432
group list
logical names DTC-426
outgoing connections DTC-425
groups DTC-423
group services DTC-426
high-speed buffer DTC-425
keepalive timer DTC-428
master and slave functions DTC-422
message retransmission limit DTC-428
multiple connections
starting DTC-431
outbound session (example) DTC-433
performance DTC-429
port name DTC-424
protocol translations
configuration (examples) DTC-498to DTC-517
LAT-to- LAT over an IP WAN (example) DTC-504
TCP standalone (example) DTC-517
to LAT via X.25 (example) DTC-509
to TCP via X.25 (example) DTC-511
X.25 host (example) DTC-513
X.25 PAD (examples) DTC-522
protocol transparency DTC-425
proxy node
enabling DTC-427
received messages DTC-429
rotary group
associating with a service (example) DTC-434
configuration (example) DTC-433
service announcements
disabling DTC-428
services
description DTC-423
LAN (example) DTC-433
partitioning by terminal line (example) DTC-433
sessions
description DTC-423
maximum virtual circuit DTC-429
timers
traffic, configuring DTC-428
virtual circuit, configuring DTC-428
lat command DTC-430, DTC-470, DTC-476
lat enabled command DTC-425
lat group-list command DTC-426
lat host-buffers command DTC-429
lat host-delay command DTC-429
lat out-group command DTC-425
lat remote-modification command DTC-426, DTC-430
lat server-buffers command DTC-429
lat service-announcements command DTC-427
lat service-group command DTC-426
lat service-responder command DTC-427
lat service-timer command DTC-427
lat vc-sessions command DTC-429
lat vc-timer command DTC-428
Layer 2 Forwarding
Legacy DDR
dial backup
asynchronous interfaces (example) DTC-396
ISDN (example) DTC-396
hubs
(figure) DTC-348
access lists DTC-350
AppleTalk (example) DTC-360
asynchronous interfaces (example) DTC-362
authentication DTC-346, DTC-347
Banyan VINES (example) DTC-360
bridging access control DTC-350
configuration task flow DTC-342
connections, monitoring DTC-357
DECnet (example) DTC-361
dialer group interface assignment DTC-350
dialer hold queue DTC-352
dialer interfaces (figure) DTC-346
dialer rotary group DTC-345, DTC-348, DTC-352, DTC-353
dialing configuration (example) DTC-365
Frame Relay (examples) DTC-369
interface diagnostics DTC-357
ISDN interfaces, enabling DTC-344
ISO CLNS (example) DTC-333, DTC-361
LAPB (example) DTC-371
LAPB, configuring DTC-357
load threshold DTC-353
multiple destinations DTC-348
multiple destinations (example) DTC-366
PPP (example) DTC-367
protocol access control DTC-350
receiving calls DTC-346
routing access control DTC-350
timers, enabling DTC-351
transparent bridging (example) DTC-358, DTC-359
X.25 DTC-356
X.25 encapsulation (example) DTC-371
XNS (example) DTC-362
ISDN NFAS
primary D-channel DTC-232
non-V.25bis modems DTC-316
PPP DDR with authentication (example) DTC-310
PPP DDR without authentication (example) DTC-308
spokes
2-way client/server (examples) DTC-330, DTC-337
access lists DTC-319
AppleTalk configuration (example) DTC-332
bandwidth on demand DTC-323
bridging access control DTC-319
carrier wait time DTC-322
configuring DTC-313
connections, monitoring DTC-327
DECnet configuration (example) DTC-332
dialer group assignment DTC-320
dialer hold queue DTC-322
DTR dialing (example) DTC-334
Frame Relay (example) DTC-339
interface diagnostics DTC-327
interface idle timer DTC-321
interface priority in dialer rotary group DTC-322
IP, configuring DTC-329
ISDN interfaces, enabling DTC-315
line down time DTC-322
multiple calls to single destination DTC-323
passive interface DTC-316, DTC-317
protocol access control DTC-319
single site calls DTC-317
spoke configuration (examples) DTC-328to DTC-340
transparent bridging DTC-319
transparent bridging (example) DTC-328, DTC-329
X.25 DTR dialing (example) DTC-340
X.25 encapsulation DTC-326
XNS configuration (example) DTC-333
V.120 incoming calls (example) DTC-236
line aux command DTC-74
linecode b8zs command DTC-170
linecode command DTC-186
linecode hdb3 command DTC-168, DTC-181
line coding
NRZI DTC-48
line numbers
absolute DTC-22
relative DTC-22
lines
ARA
configuring DTC-557
asynchronous
configuring DTC-21
asynchronous modem
configuring DTC-27
automatic disconnect
configuring DTC-66
compared to interfaces DTC-8
connection protocol
configuring DTC-461
connections
configuring individual DTC-77
DDR asynchronous
downtime, enabling DTC-322
looped-back DTC-244
modem control
configuring DTC-60
modems
disabling DTC-129
parity
configuring DTC-464
passwords
enabling DTC-464
relationship to interfaces DTC-20
reverse Telnet line speed DTC-415
stop bits
configuring DTC-464
terminal and keyboard characteristics
configuring DTC-446
terminal speeds
configuring DTC-464
tty DTC-20
types
description DTC-20
line speeds
configuring DTC-464
load threshold
dialer rotary DTC-353
local-area transport
logging
vty-asynchronous authentication information DTC-494
buffer DTC-494
UNIX syslog server DTC-495
logical constructs
group asynchronous interfaces DTC-8
virtual template interfaces DTC-10
logical interfaces
dialer DTC-11
virtual access DTC-12
virtual asynchronous DTC-14, DTC-233
login authentication command DTC-465, DTC-563
login authentication nasi command DTC-143
login command DTC-464
login local command DTC-465
login-string command DTC-415
login tacacs command DTC-465, DTC-563
loopback (controller) command DTC-199
loopback diagnostics
description DTC-198
loopback local (controller) command DTC-198, DTC-199
loopback remote (controller) command DTC-199
loopback remote (interface) command DTC-201
loopbacks
channelized E1
controllers DTC-199
interface local DTC-200
channelized T1
interface local DTC-200
CSU/DSU
remote DTC-201
LQM
keepalives
enabling LQRs DTC-247
M
MacIP
clients
monitoring DTC-568
servers
monitoring DTC-568
traffic statistics
monitoring DTC-568
Maintenance Operation Protocol
map class
dialer profiles
configuring DTC-378
map-class dialer command DTC-223, DTC-378
messages
line-in-use
enabling DTC-415
Telnet
failed connection DTC-416
login DTC-416
successful connection DTC-416
suppress connection DTC-417
Microsoft Point-to-Point Compression
MLP
Distributed MLP
configuration (example) DTC-274
configuring DTC-263
overview DTC-261
T3 configuration (example) DTC-273
topology DTC-262
Inverse Multiplexer
configuring DTC-263
overview DTC-261
topology DTC-262
mnemonic addressing
character limitations DTC-552
configuration (examples) DTC-552
description DTC-552
format options DTC-552
modem answer-timeout command DTC-65, DTC-68
modem at-mode command DTC-112
modem autoconfigure command DTC-84
modem autotest command DTC-117
modem bad command DTC-130
modem buffer-size command DTC-113
modem busyout command DTC-129
modem busyout threshold command DTC-129
modem callin command DTC-67
modem callout command DTC-68
modem connections
individual DTC-77
multiple DTC-84
testing DTC-82
modem cts-required command DTC-65
modem dialin command DTC-62, DTC-64
modem dtr-active command DTC-62
modem hold-reset command DTC-130
modem inout command DTC-64
modem management
AT commands DTC-112
basic modems DTC-98
busy out modem card DTC-129
connection speed
verifying DTC-123
inoperable modems DTC-130
integrated modem cards DTC-96
modem activity
monitoring DTC-104
modem control functions
event buffer DTC-130
statistics
call-switching DTC-113
connected AT sessions DTC-113
event log DTC-113
event polling DTC-113
performance DTC-113
system summary DTC-113
topologies DTC-100
modem poll retry command DTC-113
modem poll time command DTC-113
modem pooling
benefits DTC-102
description DTC-102
monitoring DTC-105
physical partitioning
description DTC-105
dial-in (example) DTC-106
dial-in and dial-out (example) DTC-108
network topology DTC-106
restrictions DTC-103
virtual partitioning
description DTC-110
dial-in (example) DTC-111
network topology DTC-110
modem recovery-time command DTC-130
modems
56K high-speed DTC-96
ARA
configuring DTC-557
automatic dialing DTC-62
chat scripts DTC-92
close connection DTC-65
communication
configuring manually DTC-86
connections
testing DTC-134
troubleshooting DTC-134
data compression DTC-79, DTC-80
DCD operation DTC-87
dial-out DTC-64
direct Telnet sessions DTC-82, DTC-133
DTR interpretation DTC-87
error correction DTC-79
external
configuring DTC-84
factory default settings DTC-85
flowcontrol
configuring DTC-87
high-speed
(figure) DTC-63
configuring DTC-62
incoming calls DTC-87
initialization strings
configuring DTC-85
inoperable
troubleshooting DTC-130
line configuration
advanced features DTC-60
continuous CTS (figure) DTC-66
incoming and outgoing calls (figure) DTC-64
modem call-in (figure) DTC-67
modem call-out (figure) DTC-69
line timing
configuring DTC-65
non-V.25bis DTR DTC-316, DTC-344
overview DTC-25
reverse connections DTC-68
stored settings DTC-86
Telebit T-3000
configuring DTC-572
troubleshooting DTC-59
V.110 terminal adapter and modem DTC-95
V.120 asynchronous access DTC-235
V.34 standard compliance DTC-98
verifying configuration DTC-58
XRemote setup DTC-450
modem shutdown command DTC-129, DTC-130
modem status-poll command DTC-113
modes
MPPC
compression scheme DTC-249
protocol field compression flag DTC-250
multicast
asynchronous serial traffic over UDP DTC-135
multilink-group command DTC-264
Multilink PPP DTC-256to DTC-261
(example) DTC-268
bundle DTC-264
caller ID authentication DTC-258
configuration (example) DTC-162
dialer profiles and DTC-271
dialer rotary
configuring DTC-259
interfaces
asynchronous DTC-257
BRI (examples) DTC-271, DTC-272
BRI multiple interfaces DTC-258
BRI single interface DTC-258
dialer rotary DTC-259
synchronous DTC-256
(example) 1
interleaving
weighted fair queuing DTC-260
Inverse Multiplexer
configuration (example) DTC-274
T3 configuration (example) DTC-273
multiple BRI DTC-259
real-time traffic
(example) DTC-273
interleaving DTC-260to DTC-261
interleaving (example) DTC-272
restriction DTC-260
rotary group
BRI members, configuring DTC-259
Stacker compression DTC-163
weighted fair queuing DTC-260
Multiple ISDN Switch Types feature
description DTC-151
use and restrictions DTC-176
multiple switch types
BRI interface
PRI interface
configuration (example) DTC-206
configuring DTC-176
restrictions DTC-176
N
NASI
client location requirements DTC-142
GNS requests DTC-143
network resource access DTC-141
RCONSOLE line DTC-142
SAP filters
configuring DTC-143
NetBEUI
connection information DTC-284
remote clients over PPP DTC-284
NetBIOS Extended User Interface
NetWare Asynchronous Services Interface
Network-Specific Facilities
NFAS
alternate route index DTC-224
switch types DTC-224
no form of a command
using xliii
Non-Facility Associated Signalling
nonreturn to zero inverted
notes
usage in text xxxv
notify command DTC-415
NRZI
encoding DTC-48
nrzi-encoding command DTC-48
NSF
call-by-call support
configuring DTC-175
restriction DTC-175
O
online documentation
P
packet assembler/disassembler
PAD
Legacy X.3 mode
configuration (examples) DTC-546
connections DTC-531
switching sessions DTC-545
user interface DTC-544
X.3 parameters DTC-545
mnemonic remote addressing
character limitations DTC-552
configuration (examples) DTC-552
description DTC-552
format options DTC-552
network topologies DTC-531
parameters
(example) DTC-546
setting DTC-545
service signals
French language DTC-534
X.28 mode
applications DTC-534
command signals DTC-535
configuration (examples) DTC-540
configuring DTC-534
overview DTC-533
X.3 parameters, configuring DTC-537
X.3 connections DTC-536
XOT
enabling DTC-547
pad command DTC-470, DTC-476, DTC-544
PAD subaddressing
configuring DTC-550
debug output DTC-551
line command output DTC-551
tty lines (examples) DTC-551
vty lines (examples) DTC-551
PAP
authentication request DTC-245
CHAP authentication order DTC-246
enabling DTC-491
vty lines
PPP DTC-491
parameter command DTC-538
parity
configuring DTC-464
parity command DTC-464
Password Authentication Protocol
password command DTC-464
passwords
enabling DTC-464
peer default ip address command DTC-71, DTC-254
peer default ip address pool command DTC-253
peer default ip address pool dhcp command DTC-253
peer neighbor-route command DTC-255
physical-layer command DTC-70
point of presence
Point-to-Point Protocol
POP
remote DTC-281
PPP
AppleTalk over
configuring DTC-280
AppleTalk Remote Access
configuring DTC-556
AppleTalk zones
(example) DTC-40
asynchronous access
ISDN lines DTC-235
automatic sessions
starting DTC-74
CHAP and PAP
authentication order DTC-246
compressions
hardware-dependent DTC-248
lossless data DTC-247
Microsoft DTC-249
platform support DTC-248
software DTC-247
connections DTC-282
encapsulations
enabling DTC-246
interfaces, configuring DTC-318, DTC-349
Legacy DDR DTC-347
half-bridging
(figure) DTC-255
configuring DTC-255
IP
address negotiation DTC-250
address pooling DTC-250
IP over
configuring DTC-278
IPX
asynchronous interfaces DTC-279
configuring DTC-278
dedicated network numbers (example) DTC-41
header compression DTC-285
loopback interfaces (example) DTC-41
IPX over
vty lines DTC-488
IPX-PPP
vty lines, configuring DTC-42
LAT
translations DTC-518
Magic Number support DTC-244
Microsoft Point-tp-Point Compression
compression scheme DTC-249
protocol field compression flag DTC-250
network-layer protocols
configuring DTC-278
peer neighbor routes
dialer interface effect DTC-255
disabling DTC-254
group-async interface effect DTC-255
PPP-IP
asynchronous interfaces, configuring DTC-40
reliable link DTC-254
SLIP banner DTC-287
(example) DTC-289
tokens DTC-287
SLIP BOOTP requests DTC-276
telecommuting configuration (example) DTC-276
X.25
tunneling (example) DTC-519
ppp authentication chap command DTC-259, DTC-318, DTC-347, DTC-349, DTC-379
ppp authentication command DTC-246
ppp authentication pap command DTC-258, DTC-347
ppp bridge appletalk command DTC-256
ppp bridge ip command DTC-256
ppp bridge ipx command DTC-256
ppp command DTC-282
ppp multilink command DTC-257, DTC-258, DTC-259, DTC-264
applied to physical and logical interfaces for dialer profiles DTC-271
ppp multilink fragmentation command DTC-264
PPP on virtual terminal lines DTC-275
ppp quality command DTC-247
ppp reliable-link command DTC-254
ppp use-tacacs command DTC-246, DTC-346
PRI
pri-group command DTC-168, DTC-170
pri-group timeslots nfas_d command DTC-225
Primary Rate Interface
printer connections
privileged EXEC mode
summary xl
privilege level command DTC-464
prompts
system xl
protocols
Combinet Proprietary Protocol DTC-171, DTC-228
preferred conection
configuring DTC-461
preferred transport
configuring DTC-462
terminal transport
configuring DTC-461
protocol translations
applications
configuration (examples) DTC-498to DTC-508
basic configuration (example) DTC-499
central site (example) DTC-502
LAT-to-LAT
Frame Relay or SMDS (example) DTC-506
IP WAN (example) DTC-504
via X.25 (example) DTC-509
LAT-to-PPP (example) DTC-518
LAT-to-TCP local translation (example) DTC-515
LAT-to-TCP over a WAN (example) DTC-510
LAT-to-TCP via X.25 (example) DTC-511
LAT-to-X.25 host (example) DTC-513
one-step method
overview DTC-469
TCP-to-X.25-host connections (example) DTC-526
parameters
changing dynamically (example) DTC-527, DTC-528
PPP over X.25 tunneling (example) DTC-518
sessions
TCP-to-SLIP translations DTC-518
tunneling PPP over X.25 (example) DTC-519
two-step method DTC-476
for TCP-to-PAD connections (example) DTC-526
general purpose gateway DTC-476
overview DTC-470
virtual asynchronous interfaces
tunneling protocols DTC-471
virtual interface templates
benefits DTC-473
virtual templates
two-step, configuring DTC-472
X.25 PAD-to-LAT (example) DTC-522
X.25 PAD-to-TCP (example) DTC-524
X.25-to-PPP tunneling (example) DTC-519
pulse-time command DTC-49
Q
question command xli
queueing
fancy
ISDN traffic shaping DTC-378
queues
R
R1 modified signalling
configuring DTC-194
R2 signalling
Cisco AS5200 DTC-180
redistribute static command DTC-330, DTC-364
refuse-message command DTC-415
remote loopback
remote DDS CSU/DSU DTC-201
resume command DTC-545
reverse Telnet
RFC 1055
SLIP DTC-275
RFC 1080
Remote Flow Control DTC-415
RFC 1144
TCP/IP header compression DTC-78, DTC-283
RFC 1331
PPP DTC-275
RFC 1332
IPCP DTC-275
RFC 1334
CHAP and PAP protocols DTC-245
RFC 1661
PPP encapsulation DTC-243
RFC 1663
PPP Reliable Transmission DTC-254
RFC 1989
PPP link quality monitoring DTC-247
RFC 1994
CHAP protocol DTC-245
rlogin
connections
(example) DTC-420
description DTC-414
monitoring DTC-418
robbed-bit signalling
(examples) DTC-207
analog calls DTC-166
configuring DTC-179
ROM monitor mode
summary xl
rotary command DTC-77
rotary groups
configuring DTC-77
description DTC-77
dialer DTC-315
route cache
invalidation
configuring DTC-287
routers
dedicated dial-in
(example) DTC-43
IGRP dial-in
(example) DTC-44
routing
asynchronous DTC-73
default DTC-73
asynchronous interface (example) DTC-277
DDR
supported protocols DTC-303
unnumbered interfaces (example) DTC-42
rxspeed command DTC-463
S
saving configuration changes xliv
script-reset command DTC-86
security
ARA
configuring DTC-560
internal username authentication DTC-561
TACACS DTC-562
Semipermanent Circuit Support on ISDN PRI
overview DTC-173
serial interfaces
configuration (examples) DTC-52
default encapsulation DTC-47
(examples) DTC-396
asynchronous interfaces (example) DTC-396
configuring DTC-394
ISDN interfaces (example) DTC-396
line delay DTC-395
traffic load threshold DTC-395
DTR signal pulsing DTC-49
encapsulation types DTC-22
G.703
configuring DTC-51
framed mode DTC-51
transmit delay DTC-49
Serial Line Internet Protocol
server connections
LAT DTC-431
SLIP DTC-283
TN3270 DTC-444
XRemote DTC-452
servers
NASI
configuring DTC-141
TFTP
nonresident fonts, enabling DTC-451
service linenumber command DTC-466
service profile identifier
service pt-vty-logging command DTC-494, DTC-495
services
LAT
available DTC-431
broadcast announcements DTC-427
description DTC-423
inbound, enabling DTC-427
LAN (example) DTC-433
logical partitioning DTC-433
session-limit command DTC-465
sessions
LAT
virtual circuits DTC-429
session-timeout command DTC-465
setenv command DTC-454
show appletalk arp command DTC-568
show appletalk interface command DTC-568
show appletalk macip-clients command DTC-568
show appletalk macip-servers command DTC-568
show appletalk macip-traffic command DTC-568
show appletalk traffic command DTC-327, DTC-357, DTC-385, DTC-568
show appletalk zone command DTC-568
show arap command DTC-567
show async bootp command DTC-79
show async status command DTC-79
show buffers command DTC-152
show busyout command DTC-129
show controller e1 command DTC-568
show controllers bri command DTC-160, DTC-161, DTC-178
show controllers e1 command DTC-177
show controllers serial command DTC-178
show controllers t1 command DTC-177
show controller t1 command DTC-198, DTC-200, DTC-568
show decnet traffic command DTC-327, DTC-357, DTC-385
show dialer command DTC-160, DTC-161, DTC-178, DTC-327, DTC-357
show dialer interface command DTC-385
show interface async command DTC-32
show interfaces bri command DTC-152, DTC-160, DTC-327, DTC-357, DTC-385
show interfaces serial bchannel command DTC-178
show interface virtual-access command DTC-492
show ip socket command DTC-138
show ipx interface command DTC-327, DTC-357, DTC-385
show ipx traffic command DTC-385
show isdn command DTC-160, DTC-177, DTC-178, DTC-223
show isdn nfas group command DTC-225
show isdn service command DTC-226
show lat services command DTC-431
show line command DTC-58, DTC-79, DTC-492
show modem at-mode command DTC-113
show modem call-stats command DTC-126
show modem command DTC-123
show modem connect-speeds command DTC-123
show modem csm command DTC-113
show modem log command DTC-113
show modem summary command DTC-113
show process cpu command DTC-47, DTC-248, DTC-249
show tcp brief command DTC-418
show tcp command DTC-418
show tn3270 ascii-hexval command DTC-443
show tn3270 character-map command DTC-443
show users command DTC-134, DTC-492
show vines traffic command DTC-327, DTC-357, DTC-385
show x25 pad command DTC-545
show xns traffic command DTC-327, DTC-357, DTC-385
show xremote command DTC-450, DTC-456
show xremote line command DTC-450, DTC-456
signalling
channel-associated
analog calls DTC-166
E1 R2
configuration (example) DTC-216
configuring DTC-189
countries supported DTC-187
country settings DTC-189
overview DTC-187
parameters DTC-189
sample topology DTC-187
troubleshooting DTC-191
in-band DTC-166
out-of-band DTC-166
R1 modified DTC-192
R2 DTC-189
encoding options DTC-195, DTC-196
framing options DTC-195, DTC-196
robbed-bit DTC-166
signals
clock
configuring DTC-49
PAD French language
configuring DTC-537
pulsing DTR DTC-49
Telnet
Break DTC-416
Synchronize DTC-415
SLIP
(examples) DTC-288
automatic sessions
starting DTC-74
defined DTC-283
IP
configuring over DTC-278
IP-SLIP
(example) DTC-40
PPP banner DTC-287
(example) DTC-289
tokens DTC-287
PPP BOOTP requests DTC-276
server connections DTC-283
telecommuting configuration (example) DTC-276
tunneling over X.25 (example) DTC-519
SMDS
LAT-to-LAT protocol translation (example) DTC-506
speed command DTC-463
SPID
stop bits
configuring DTC-464
stopbits command DTC-464
subinterface configuration mode
summary xl
switched 56K
analog calls DTC-182
benefits DTC-181
BRI bearer capability DTC-183
call processing components DTC-183
configuring DTC-186
ISDN BRI traffic DTC-184
overview DTC-182
prerequisites DTC-182
switched 56K over CT1 RBS
56K and modem calls (example) DTC-208
call processing components DTC-183
configuration (example) DTC-208
description DTC-183
ISDN BRI solution DTC-184
prerequisites DTC-182
restrictions DTC-182
sample topology DTC-182, DTC-185
startup configuration (example) DTC-209
T1 CAS
line provisioning DTC-209
T
T1 controller
configuration (example) DTC-202
shutdown DTC-54
T3
Configuring for MLP (example) DTC-273
Tab key
command completion xli
TACACS
ARA protocol authentication DTC-563
CCL scripts
modified and unmodified DTC-563
security
configuring DTC-562
user authentication
configuration (example) DTC-575
configuring DTC-563
user ID DTC-465
Taiwan
ISDN Sending Complete information element DTC-159, DTC-174
TCP
local LAT translation DTC-515
protocol translations
standalone LAT-to-TCP (example) DTC-517
to LAT via X.25 (example) DTC-511
X.25 PAD (example) DTC-524
TCP/IP
header compression
(example) DTC-42
configuring DTC-78, DTC-284, DTC-489
EXEC-level DTC-78
Van Jacobsen DTC-78
TCP-to-PAD connections DTC-527to DTC-528
Telnet connections DTC-417
TCP connection attempt time
configuring DTC-285
TCP header compression
See TCP/IP, header compression
TEI
ISDN terminal endpoint identifier interfaces
configuration (example) DTC-203
telecommuting
configuration (example) DTC-276
Telnet
Break signal DTC-416
configuring DTC-415
connection (example) DTC-419
connections
suppressing messages DTC-419
description DTC-414
Internet addresses
configuring DTC-416
interrupt characters DTC-416
line speeds DTC-415
monitoring DTC-418
notification of pending output DTC-415
refuse negotiation options DTC-415
Remote Echo option DTC-415
Suppress Go Ahead option DTC-415
Synchronize signal DTC-415
telnet break-on ip command DTC-415
telnet command DTC-416, DTC-470, DTC-476
telnet refuse-negotiations command DTC-415
Telnet sessions
direct
starting DTC-81, DTC-82, DTC-85, DTC-133
(example) DTC-84
verifying DTC-84
telnet speed command DTC-415
telnet sync-on-break command DTC-415
telnet transparent command DTC-415
termcaps
description DTC-436
terminal
3270-type DTC-436
automatic command execution
configuring DTC-77
character data bits DTC-464
communication parameters, configuring DTC-463, DTC-464
EXEC process
configuring DTC-73
line speed DTC-464
parity bit DTC-464
parity bits
configuring DTC-464
sessions limits
configuring DTC-465
transport protocol
configuring preferred DTC-462
V.120 asynchronous DTC-234
terminal databits command DTC-464
terminal emulations
custom (example) DTC-445
terminal lat out-group command DTC-430
terminal parity command DTC-464
terminal rxspeed command DTC-464
terminal speed command DTC-464
terminal stopbits command DTC-464
terminal transport preferred command DTC-462
terminal-type command DTC-442
test modem back-to-back command DTC-120
timeout interval
configuring DTC-65
timers
dialer
carrier wait time, enabling DTC-352
fast idle, enabling DTC-321, DTC-378
idle reset, enabling DTC-319
line down-time, enabling DTC-322
line idle, enabling DTC-351
wait for carrier, enabling DTC-322
LAT
keepalive, configuring DTC-428
virtual circuit, configuring DTC-428
timeslot command DTC-51
TN3270
8-bit transparent mode DTC-444
character mapping
(example) DTC-446
configuring DTC-443
configuration files (examples) DTC-444to DTC-446
connection environment (figure) DTC-437
extended datastream
enabling DTC-442
hexadecimal values DTC-443
IBM host DTC-436
keymaps
function DTC-437
selection priority DTC-439
null processing
enabling DTC-442
reset-after-error DTC-442
server connections DTC-444
startup sequence priorities DTC-438
termcaps DTC-436
terminal emulations
default files DTC-440
listing files DTC-442
terminals DTC-436
ttycaps
function DTC-437
selection priority DTC-438
selection process (figure) DTC-438
tn3270 8bit display command DTC-443
tn3270 8bit transparent-mode command DTC-443
tn3270 character-map command DTC-443
tn3270 command DTC-444
tn3270 datastream command DTC-442
tn3270 null-processing command DTC-442
tn3270 reset-required command DTC-442
translate command DTC-474, DTC-478, DTC-479
translate lat command DTC-475
translate options
virtual interface template options
(table) DTC-475
translate tcp command DTC-475
translate x25 command DTC-475
translations
transmit clock
transmit-clock-internal command DTC-48
transmitter-delay command DTC-49
transparent bridging
dialer profiles
bridge protocols, defining DTC-382
interfaces, configuring DTC-384
Legacy DDR
access (example) DTC-328, DTC-329, DTC-358, DTC-359
transport command DTC-462
transport input command DTC-237, DTC-462
transport output command DTC-137, DTC-462
transport preferred command DTC-462
ts16 command DTC-51
ttycap command DTC-442
ttycaps
alternate DTC-443
function DTC-437
line characteristics DTC-443
selection priority DTC-438
selection process (figure) DTC-438
tty lines
configuring DTC-20
numbering scheme
(table) DTC-29
relationship to interfaces DTC-19
tunnel command DTC-282
tunneling
L2F DTC-473
overview DTC-469
packet
asynchronous host roaming DTC-281
PPP across X.25 (examples) DTC-496
SLIP and PPP over X.25 (example) DTC-519
tunnel sessions
TCP or LAT WAN (example) DTC-473
X.25 WAN (example) DTC-472
txspeed command DTC-463
U
UDPTN
configuring DTC-137
overview DTC-135
udptn command DTC-137
User Datagram Protocol Telnet
user EXEC mode
summary xl
user ID
TACACS DTC-465
username command DTC-246, DTC-347, DTC-465, DTC-561
usernames
maximum links (example) DTC-266
V
V.120 standard
dynamic detection DTC-235
(example) DTC-236
ISDN asynchronous communications DTC-234
VINES
DDR
configuring DTC-306
dialer profiles DTC-380
vines access-list command DTC-306, DTC-380
virtual access interfaces
description DTC-12
maximum number
configuring DTC-472
protocol translations
maintaining DTC-492
monitoring DTC-492
sessions DTC-472
virtual asynchronous interfaces DTC-472
virtual asynchronous interfaces
description DTC-14
maximum transmission unit
configuring DTC-490
PPP authentication
enabling DTC-490
virtual circuits
LAT timers DTC-428
virtual interface templates
maximum number
configuring DTC-472
protocol translations
authentication, configuring DTC-477
benefits DTC-473
configuring DTC-492
one-step, configuring DTC-474
tunneling PPP across X.25 (examples) DTC-496
two-step, configuring DTC-476
tunneling
PPP two-step protocol translation DTC-476
SLIP two-step protocol translation DTC-476
Virtual Private Dialup Network
VMS
host connection DTC-424
VPDN
Layer 2 Forwarding DTC-473
vty-async command DTC-235, DTC-479, DTC-487
vty-async dynamic-routing command DTC-280, DTC-488, DTC-489
vty-async header-compression command DTC-489
vty-asynchronous authentication information
buffer DTC-494
logging DTC-494
UNIX syslog server DTC-495
vty-async ipx ppp-client loopback command DTC-280, DTC-488
vty-async keepalive command DTC-489
vty-async ppp authentication chap command DTC-491
vty-async ppp authentication pap command DTC-491
vty-async virtual-template command DTC-237, DTC-477
vty-line mtu command DTC-490
W
X
X.121
symbolic host names DTC-483
X.25
address mapping DTC-356
connection to LAT (example) DTC-522
DTR dialing (example) DTC-371
Legacy DDR
dialers supported DTC-326, DTC-356
DTR dialing (example) DTC-340, DTC-371
Legacy X.3 PAD
configuration (examples) DTC-546
connections DTC-544
parameters, configuring DTC-545
sessions, monitoring DTC-545
sessions, starting DTC-545
sessions, stopping DTC-545
mapping protocol address to remote host DTC-326
PAD-to-TCP translations (example) DTC-524
X.28 PAD
command signals DTC-535
configuration (examples) DTC-540
configuring access DTC-534, DTC-535, DTC-538
X.28 parameters
configuring DTC-535
X.3 PAD
connections DTC-536
connections, monitoring DTC-545
parameters, configuring DTC-537
X.29
access lists DTC-482
configuring DTC-481
X.29 reselect function
configuring DTC-551
X.3 parameter settings
See X.25, Legacy X.3 PAD and X.3 PAD
x25 address command DTC-326, DTC-356
x25 host command DTC-483
x25 map command DTC-326, DTC-356
x28 escape command DTC-535
x28 nuicud command DTC-535
x28 profile command DTC-535
x28 reverse command DTC-535
x28 verbose command DTC-535
x29 access-list command DTC-482
x29 profile command DTC-482, DTC-543
x3 command DTC-545
X Display Manager Control Protocol
XDMCP
XRemote
starting DTC-452
XNS
DDR
configuring DTC-307
dialer profiles
configuring DTC-382
XOT (X.25 over TCP)
XRemote
automatic session startup DTC-452to DTC-453
clients
starting DTC-454
configuration file (example) DTC-457
configuring DTC-450
connections DTC-456
host computer DTC-454
monitoring DTC-456
connections to servers DTC-455to DTC-456
connectivity DTC-448
EXEC prompt DTC-454
font loader
protocol translator DTC-451
retries, configuring DTC-450
fonts
DECwindows DTC-451
remote access DTC-449
internal buffer size
configuring DTC-450
manual session startup DTC-453
modem setup DTC-450
monitoring DTC-450
connections DTC-456
nonresident fonts
access DTC-451
reenabling manually DTC-455
server connections DTC-452
sessions
between servers DTC-455
stopping DTC-453
traffic
monitoring DTC-456
X display location
configuring DTC-454
X terminal parameter setup DTC-450
xremote command DTC-453
xremote lat command DTC-451, DTC-452
xremote tftp buffersize command DTC-450
xremote tftp host command DTC-450
xremote tftp retries command DTC-450
xremote xdm command DTC-452
X Window System
client server DTC-448
description DTC-447
display location
configuring DTC-454
display server DTC-448
Posted: Wed Feb 8 10:47:58 PST 2006
All contents are Copyright © 1992--2006 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.