cc/td/doc/product/software/ios103
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Introduction

Introduction

This document provides a summary of the commands used to configure routers. This book is divided into sections that correspond to the chapters of the Router Products Command Reference publication. Within each section the commands are listed in alphabetical order. The table of contents shows the sections in this book; the index lists all the commands in alphabetical order, without regard to the section where they are located. See the Router Products Command Reference publication for complete command descriptions and examples.

Conventions

This document uses the following conventions:

  For example, the key combination ^D or Ctrl-D mean hold down the Control key while you press the D key.
  For example, when setting up a community string for SNMP to "public," do not use quotes around the string, or the string will include the quotation marks.

Command descriptions use the following conventions:

EXEC System Use

Router>
  There is also a privileged-level prompt available to the system administrator by entering a password. It is the server name followed by a pound sign (#), as in this example:
Router# --More--
  Press the space bar to continue the output or press Return to display the next line. Press any other key to return to the prompt.

System Help

You can obtain help when entering commands by using the following methods:

   Ctrl-^ ?
  Press the Ctrl, Shift, and 6 keys simultaneously, let go, and type ?.


hometocprevnextglossaryfeedbacksearchhelp
Posted: Mon Oct 21 11:20:09 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.