cc/td/doc/product/software/ios100
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Introduction

Introduction

This document provides a summary of the commands used by system administrators to configure routers. This book is divided into parts and sections that correspond to the parts and sections of the Router Products Command Reference publication. Within each section the commands are listed in alphabetical order. The Table of Contents shows the parts and sections in this book; the Index lists all the commands in alphabetical order, without regard to the section where they are located. See the Router Products Command Reference publication for complete command descriptions and examples.

Conventions

This document uses the following conventions:

For example, the key combination ^D means hold down the Control key while you press the D key.
For example, when setting up a community string for SNMP to "public," do not use quotes around the string, or the string will include the quotation marks.

Command descriptions use the following conventions:


Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual.

EXEC System Use

Router>
There is also a privileged-level prompt available to the system administrator by entering a password. It is the server name followed by a #, as this example:
Router# --More--
Press the space bar to continue the output or press Return to display the next line. Press any other key to return to the prompt.

System Help

You can obtain help in entering commands by using the following methods:

Ctrl-^ ?
Press the Ctrl, Shift, and 6 keys simultaneously, let go, and type ?.

hometocprevnextglossaryfeedbacksearchhelp
Copyright 1989-1997 © Cisco Systems Inc.