|
Table Of Contents
Release Notes for Cisco MDS 9000 Family Fabric Manager Release 3.0(3a)
Upgrading Your Version of Cisco Fabric Manager
New Features in Fabric Manager Release 3.0(3a)
Regulatory Compliance and Safety Information
Installation and Configuration Note
Obtaining Technical Assistance
Cisco Technical Support & Documentation Website
Definitions of Service Request Severity
Release Notes for Cisco MDS 9000 Family Fabric Manager Release 3.0(3a)
Release Date: October 30, 2006
Text Part Number: OL-11762-01 B0
This document describes the caveats and limitations for Cisco MDS 9000 Family Fabric Manager Release 3.0(3a). Use this document in conjunction with documents listed in the "Related Documentation" section.
Note Cisco Fabric Manager 3.0(3a) works in conjunction with all Cisco MDS SAN-OS releases up to and including Release 3.0(3). All release notes may have been updated with new information on restrictions and caveats. For the most recent information on your corresponding Cisco MDS SAN-OS release, refer to the following website: http://www.cisco.com/en/US/products/hw/ps4159/ps4358/prod_release_notes_list.html
Table 1 shows the on-line change history for this document.
Table 1 Online History Change
Revision Date DescriptionA0
10/30/2006
Created release notes
B0
02/27/2007
Added DDTS CSCsh17787.
Contents
This document includes the following sections:
• Upgrading Your Version of Cisco Fabric Manager
• New Features in Fabric Manager Release 3.0(3a)
• Limitations and Restrictions
• Caveats
• Obtaining Technical Assistance
Introduction
The Cisco Fabric Manager provides an alternative to the command-line interface (CLI) for most switch configuration commands. Fabric Manager provides powerful Fibre Channel troubleshooting tools. These in-depth health and configuration analysis capabilities leverage unique MDS 9000 switch capabilities: Fibre Channel Ping and Traceroute.
The Cisco Fabric Manager includes these management applications:
•Fabric Manager (client and server)
•Device Manager
•Performance Manager
•Fabric Manager Web Services
For detailed information on using Cisco Fabric Manager to configure a Cisco MDS 9000 Family switch, refer to the Cisco MDS 9000 Family Fabric Manager Configuration Guide. For information on using the CLI to configure a Cisco MDS 9000 Family switch, refer to the Cisco MDS 9000 Family CLI Configuration Guide or the Cisco MDS 9020 Switch Configuration Guide and Command Reference.
Upgrading Your Version of Cisco Fabric Manager
To upgrade your version of Cisco Fabric Manager,or install Fabric Manager for the first time, follow these steps:
Step 1 Download the latest Fabric Manager .jar file from the Software Center on Cisco.com (http://www.cisco.com/cgi-bin/tablebuild.pl/mds-fm). You must have a CCO account to access the files on Software Center.
Note You must have Java 1.4.2_05 or higher installed before you can install Cisco Fabric Manager. Java 1.5.x is recommended.
Step 2 Launch the Fabric Manager installation program by doing one of the following:
a. Navigate to the folder where you have downloaded the file and double-click it.
b. Open the file using Internet Explorer.
c. Enter java -jar <filename> on the Windows or UNIX command line.
Step 3 Select an installation folder for Fabric Manager on your workstation. The default location is C:\Program Files\Cisco Systems\MDS 9000 for Windows. On a Solaris or Linux machine, the installation path name is /usr/local/cisco_mds9000 or $HOME/cisco_mds9000, depending on the permissions of the user performing the installation.
Note The Fabric Manager Server and the Fabric Manager Client must be able to communicate with each other at all times. They can be installed on different workstations or the same workstation.
Step 4 Check the Use Global Device Aliases in place of the FC Aliases check box if you want to use global device aliases or replace existing per VSAN FC aliases with global device aliases.
Step 5 Check the Don't install and run FM Server check box if you are installing just the Fabric Manager Client on a remote workstation.
Note For other methods and details on upgrading, downgrading, and uninstalling Cisco Fabric Manager, refer to the Cisco MDS 9000 Family Fabric Manager Configuration Guide and the Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide.
New Features in Fabric Manager Release 3.0(3a)
There are no new features available for this release.
Limitations and Restrictions
There are no limitations or restrictions for this release.
Caveats
This section lists the open and resolved caveats for this release. Use Table 2 to determine the status of a particular caveat.
Table 2 Open Caveats and Resolved Caveats Reference
DDTS Number Software Release (Open or Resolved) 3.0(3) 3.0(3a)Severity 2
O
R
Severity 3
O
R
O
R
-
O
Resolved Caveats
•CSCsg22134
Symptom: When the server.hostname parameter is set to an IP address in the server.properties file, the Fabric Manager Server restart message repeatedly displays in the Fabric Manager Client open dialog box.
Workaround: None. This issue is resolved.
•CSCsg27527
Symptom: Following an upgrade of the Fabric Manager to Cisco MDS SAN-OS 3.0(3), some hosts have a status of "not in fabric" in the VSAN local zone. In addition, the hosts do not appear in the VSAN host table or in the IVR device database. As a result, Fabric Manager cannot be used to configure zones or IVR zones for these hosts.
Workaround: None. This issue is resolved.
•CSCsg30429
Symptom:If you click the Dump FM Server popup menu item, or use the Fabric Manager Server info command, the Fabric Manager Server displays an error message.
Workaround: None. This issue is resolved.
Open Caveats
•CSCsh17787
Symptom: If you are using Fabric Manager Web Services to generate a Custom Report for End Devices, you might not be able to see the devices connected to the different port groups on the MDS 9000 48-port 4-Gbps Fibre Channel module. However, the same report shows the devices connected to the port groups on the MDS 9000 32-port 1-Gbps/2-Gbps Fibre Channel Storage Services Module (SSM).
Workaround: None.
Related Documentation
The documentation set for the Cisco MDS 9000 Family includes the following documents. To find a document online, use the Cisco MDS SAN-OS Documentation Locator at: http://www.cisco.com/en/US/products/ps5989/products_documentation_roadmap09186a00804500c1.html.
For information on IBM TotalStorage SAN Volume Controller Storage Software for the Cisco MDS 9000 Family, refer to the IBM TotalStorage Support website: http://www.ibm.com/storage/support/2062-2300/
Release Notes
•Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Releases
•Cisco MDS 9000 Family Release Notes for Storage Services Interface Images
•Cisco MDS 9000 Family Release Notes for Cisco MDS SVC Releases
•Cisco MDS 9000 Family Release Notes for Cisco MDS 9000 EPLD Images
Compatibility Information
•Cisco MDS 9000 SAN-OS Hardware and Software Compatibility Information
•Cisco MDS 9000 Family Interoperability Support Matrix
•Cisco MDS SAN-OS Release Compatibility Matrix for IBM SAN Volume Controller Software for Cisco MDS 9000
•Cisco MDS SAN-OS Release Compatibility Matrix for Storage Service Interface Images
Regulatory Compliance and Safety Information
•Regulatory Compliance and Safety Information for the Cisco MDS 9000 Family
Hardware Installation
•Cisco MDS 9500 Series Hardware Installation Guide
•Cisco MDS 9200 Series Hardware Installation Guide
•Cisco MDS 9216 Switch Hardware Installation Guide
•Cisco MDS 9100 Series Hardware Installation Guide
•Cisco MDS 9020 Fabric Switch Hardware Installation Guide
Cisco Fabric Manager
•Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide
•Cisco MDS 9000 Family Fabric Manager Configuration Guide
•Cisco MDS 9000 Fabric Manager Online Help
Command-Line Interface
•Cisco MDS 9000 Family Software Upgrade and Downgrade Guide
•Cisco MDS 9000 Family CLI Quick Configuration Guide
•Cisco MDS 9000 Family CLI Configuration Guide
•Cisco MDS 9000 Family Command Reference
•Cisco MDS 9000 Family Quick Command Reference
•Cisco MDS 9020 Fabric Switch Configuration Guide and Command Reference
•Cisco MDS 9000 Family SAN Volume Controller Configuration Guide
Troubleshooting and Reference
•Cisco MDS 9000 Family Troubleshooting Guide
•Cisco MDS 9000 Family MIB Quick Reference
•Cisco MDS 9020 Fabric Switch MIB Quick Reference
•Cisco MDS 9000 Family CIM Programming Reference
•Cisco MDS 9000 Family System Messages Reference
•Cisco MDS 9020 Fabric Switch System Messages Reference
Installation and Configuration Note
•Cisco MDS 9000 Family SSM Configuration Note
•Cisco MDS 9000 Family Port Analyzer Adapter Installation and Configuration Note
Obtaining Technical Assistance
Cisco Technical Support provides 24-hour-a-day award-winning technical assistance. The Cisco Technical Support & Documentation website on Cisco.com features extensive online support resources. In addition, if you have a valid Cisco service contract, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not have a valid Cisco service contract, contact your reseller.
Cisco Technical Support & Documentation Website
The Cisco Technical Support & Documentation website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The website is available 24 hours a day, at this URL:
http://www.cisco.com/techsupport
Access to all tools on the Cisco Technical Support & Documentation website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a user ID or password, you can register at this URL:
http://tools.cisco.com/RPF/register/register.do
Note Use the Cisco Product Identification (CPI) tool to locate your product serial number before submitting a web or phone request for service. You can access the CPI tool from the Cisco Technical Support & Documentation website by clicking the Tools & Resources link under Documentation & Tools. Choose Cisco Product Identification Tool from the Alphabetical Index drop-down list, or click the Cisco Product Identification Tool link under Alerts & RMAs. The CPI tool offers three search options: by product ID or model name; by tree view; or for certain products, by copying and pasting show command output. Search results show an illustration of your product with the serial number label location highlighted. Locate the serial number label on your product and record the information before placing a service call.
Submitting a Service Request
Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and S4 service requests are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Service Request Tool provides recommended solutions. If your issue is not resolved using the recommended resources, your service request is assigned to a Cisco engineer. The TAC Service Request Tool is located at this URL:
http://www.cisco.com/techsupport/servicerequest
For S1 or S2 service requests or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.
To open a service request by telephone, use one of the following numbers:
Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553-2447For a complete list of Cisco TAC contacts, go to this URL:
http://www.cisco.com/techsupport/contacts
Definitions of Service Request Severity
To ensure that all service requests are reported in a standard format, Cisco has established severity definitions.
Severity 1 (S1)—Your network is "down," or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.
Severity 2 (S2)—Operation of an existing network is severely degraded, or significant aspects of your business operation are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.
Severity 3 (S3)—Operational performance of your network is impaired, but most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.
Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
CCVP, the Cisco Logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, Follow Me Browsing, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, LightStream, Linksys, MeetingPlace, MGX, Networking Academy, Network Registrar, Packet, PIX, ProConnect, RateMUX, ScriptShare, SlideCast, SMARTnet, StackWise, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0609R)
Copyright © 2006 Cisco Systems, Inc. All rights reserved.
Posted: Tue Feb 27 12:41:45 PST 2007
All contents are Copyright © 1992--2007 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.