Quick Start Guide for Cisco 1040 Sensor

This guide is designed to help you quickly set up and use your Cisco 1040 Sensor (Cisco 1040). A Cisco 1040 is a shelf-top unit that connects to the network and obtains Power over Ethernet (PoE) through a Cisco Catalyst switch. It is easy to connect your Cisco 1040. These sections explain what a Cisco 1040 does and how it fits in with products in the Cisco Unified Communications Management Suite:

Cisco 1040s and Cisco Unified Service Monitor

Cisco 1040s listen to Real-Time Transport Protocol (RTP) voice traffic on a Switch Port Analyzer (SPAN) port that you must configure to mirror voice traffic on phone ports or voice VLANs. Cisco 1040 calculates Mean Opinion Scores (MOS) and sends data at 60-second intervals to Cisco Unified Service Monitor (Service Monitor), a product from the Cisco Unified Communications Management Suite.

Service Monitor examines the MOS value and compares it against a user-specified threshold value for the codec in use on the call. When MOS drops below the threshold, Service Monitor generates SNMP traps and sends them to up to four recipients. A single Service Monitor can receive and analyze MOS data from multiple Cisco 1040s. If you have more than one Service Monitor, you can configure Cisco 1040s to fail over to a secondary service monitor. For more information, see User Guide for Cisco Unified Service Monitor.

Cisco 1040s and Cisco Unified Operations Manager

You can use Cisco Unified Operations Manager (Operations Manager) to further analyze, display, and act on the traps that Cisco 1040 generates. When configured as a trap recipient from Service Monitor, Operations Manager generates service quality events, displays and tracks these events on a real-time dashboard, and displays and stores event history. You can configure additional event settings on Operations Manager that alert you to low MOS and to the occurrence of many service quality events during a period of time. In addition, you can configure Operations Manager to send notifications by e-mail, SNMP trap, and syslog message.

2 Preparing to Connect Your Cisco 1040

This section describes tasks that you must perform the first time you set up your network to support Cisco 1040 operations. If you have not already completed the following tasks, it is advisable to complete them so that your Cisco 1040 becomes fully operational minutes after you connect it.

Install and Configure Cisco Unified Service Monitor

Instructions for completing these tasks are available in User Guide for Cisco Unified Service Monitor and in Service Monitor online help. Using Service Monitor, perform the following tasks:

•

Set up Service Monitor. Among other parameters, you will specify a TFTP server.

Configure DHCP Server Option 150

Configure your DHCP server so that option 150 returns the IP address for the TFTP server and provides an IP address, subnet mask, default gateway, and, optionally, a DNS server for a Cisco 1040.

If you would like to configure a Cisco router as a DHCP server, see the following URL.

(Optional) Configure DNS

3 Connecting Your Cisco 1040

Figure 1 shows the connections and indicators on the front panel of your Cisco 1040.

1	10/100-1—Fast Ethernet port, standard RJ45 for connecting to the network and obtaining inline power. This port supports IEEE 802.3af standard PoE. Note This port does not support Cisco prestandard PoE.	3	Status indicator light—See Understanding the Status Indicator Light.
2	10/100-2—Fast Ethernet port, standard RJ45 for connecting to a SPAN or Remote SPAN (RSPAN) destination port.	—	—

Figure 2 shows the connection on the rear panel of your Cisco 1040 for an external, separately certified AC/DC power supply, for use if IEEE 802.3af-compliant PoE is not available. See Cable Specifications.

Cisco 1040 Port Usage

This section provides a list of ports used by the Cisco 1040, for your reference.

Selecting and Configuring a Cisco Catalyst Switch

For information about configuring SPAN and RSPAN on Cisco Catalyst switches and modules, see the following URL.

Connecting the Cisco 1040 to the Cisco Catalyst Switch

Table 1 Cisco 1040 Port Usage
Protocol	Port Number	Service Name
UDP	53	DNS
UDP	67 and 68	DHCP
UDP	69	TFTP—Cisco 1040 uses TFTP to get a configuration file and binary image file.
UDP	5666	Syslog—Cisco 1040 sends syslog messages to Service Monitor.
TCP	2000	SCCP—Cisco 1040 uses SCCP to communicate with Service Monitor.
TCP	80	http—Cisco 1040 has a web-based user interface to view its configuration

Step 1

Place the Cisco 1040 on top of the appropriate Cisco Catalyst switch.

Note

The minimum height necessary to install the Cisco 1040 is 5.08 cm (2 in.). The installation of the unit should not restrict the airflow around the device. When operating the unit, ensure that no objects are placed on top of the unit.

Step 2

Connect a Category 5 straight-through cable from 10/100-1 (Fast Ethernet port 1) on the Cisco 1040 to a port that supports IEEE 802.3af standard PoE on the Cisco Catalyst switch.

Step 3

Connect a Category 5 straight-through cable from 10/100-2 (Fast Ethernet port 2) on the Cisco 1040 to a port that you have configured as a SPAN (or RSPAN) destination port on the Cisco Catalyst switch.

Note

Verify that this port on the switch is set up to mirror a VLAN or switch ports to which phones are connected.

A startup process begins on the Cisco 1040. The status indicator on the front of the Cisco 1040 should flash amber, turn yellow, and then turn green. For more information, see Understanding the Status Indicator Light.

4 Using Your Cisco 1040

After you have successfully connected your Cisco 1040, use Service Monitor to manage and configure it. For example, you will use Service Monitor to specify the TFTP server to use, update configuration files, set the time, and reset Cisco 1040s.

This section describes information that you can obtain directly from a Cisco 1040:

Note Information obtained directly from a Cisco 1040 is also available in another form from Service Monitor. Service Monitor displays the status of Cisco 1040s.

Understanding the Status Indicator Light

The status indicator light on the front panel of a Cisco 1040 indicates what the Cisco 1040 is currently doing. The following table lists the conditions that the status indicator light can be in and places the conditions in startup sequence order.

Using the Cisco 1040 Web Interface

You can open a web interface to view information stored on a Cisco 1040 as follows.

Startup Sequence Number	Status Indicator Light	Cisco 1040 Condition
1	Orange solid	Initial state
2	Yellow and flashing	Obtained power from the switch and is doing one of the following: 1. Obtaining an IP address using DHCP. 2. Accessing the TFTP server. 3. Requesting the configuration file and the binary image file.
3	Yellow solid	Registering to a service monitor. Note If unable to register, the Cisco 1040 returns to startup sequence number 2.
4	Green solid or green and flashing	Registered to a service monitor: •Green solid—Registered to the primary service monitor. •Green and flashing—Registered to a secondary service monitor. When the primary service monitor is available again, Cisco 1040 registers with it again and the status indicator light turns green solid.

Step 1

In your browser, enter http://<IP address or DNS name> where IP address is the address of your Cisco 1040 and DNS name is the DNS name for the Cisco 1040. For example:

–

operational—Cisco 1040 is receiving RTP streams, analyzing the data, and sending syslog messages when required.

•

Current Service Monitor—IP address or DNS name of the service monitor to which the Cisco 1040 is registered; this could be the primary or secondary service monitor.

•

TFTP IP Address—IP address of the TFTP server from which the Cisco 1040 obtains a configuration file and binary image file.

•

Software Version—Name of the binary image file installed on the Cisco 1040.

•

Last Updated—The last time that the configuration for the Cisco 1040 was updated.

Step 2

To view the contents of the configuration file on the TFTP server for this Cisco 1040, enter http://<IP address or DNS name>/Communication where IP address is the address of your Cisco 1040 and DNS name is the DNS name for the Cisco 1040. For example:

The Communication Log File window displays the following information, which is stored in the configuration file on the TFTP server:

•

Receiver—IP address or DNS name of each Service Monitor defined in the configuration file—primary or secondary—separated by semicolons.

•

Image—Name of the binary image file that the Cisco 1040 should download and run from the TFTP server.

•

Last Updated—The last time that this configuration file was updated on the Service Monitor system.

•

CDPGlobalRunState—States whether CDP is enabled (true) or disabled (false).

•

SyslogPort—States the port protocol (UDP) and port number used for sending syslogs to Service Monitor.

•

SkinnyPort—States the port protocol (TCP) and port number used to communicate with Service Monitor.

5 Where to Go Next

After you have performed first time installation tasks and connected a Cisco 1040, Cisco 1040 starts listening to RTP traffic and sending MOS data to Service Monitor. For more information, see the following User Guides for Cisco Unified Communications Management Suite applications:

Select the appropriate Cisco Unified Communications Management Suite application.

6 Related Documentation

Note Although every effort has been made to validate the accuracy of the information in the printed and electronic documentation, updates are sometimes necessary. Any changes to the original publications are reflected on Cisco.com, where you will find the most up-to-date documentation.

For information about configuring SPAN and RSPAN ports on Cisco Catalyst switches, see the software configuration guide for the appropriate switch model and Cisco IOS version. Use this procedure to locate software configuration guides for Cisco Catalyst switches.

Step 6

Select the software configuration guide for the Cisco Catalyst switch model and Cisco IOS version that is running on the switch.

For information about installing, troubleshooting, and using the applications related to Cisco 1040 see Table 2.

Table 2 Related Documentation
To learn more about...	See this document	In the product package?	On the product CD?	On Cisco.com?	On the Cisco Doc. DVD?	In the online help?
The known product bugs (DDTS)	Release Notes for Cisco Unified Service Monitor	No	Yes	Yes	Yes	No
The known product bugs (DDTS)	Release Notes for Cisco Unified Operations Manager	No	No	Yes	Yes	No
Performing a typical or custom installation	Quick Start Guide for Cisco Unified Service Monitor	No	Yes	Yes	Yes	No
Performing a typical or custom installation	Installation Guide for Cisco Unified Operations Manager (Includes Service Monitor)	No	No	Yes	Yes	No
Features, tasks, and troubleshooting	User Guide for Cisco Unified Service Monitor	No	Yes	Yes	Yes	Yes¹
Features, tasks, and troubleshooting	User Guide for Cisco Unified Operations Manager	No	No	Yes	Yes	No

¹From the Service Monitor Homepage, click Help.

7 Technical Specifications

Physical and Operating Environment Specifications

Cable Specifications

Network Port Pinouts

8 Regulatory Compliance and Safety Information for Your Cisco 1040

Regulatory compliance and safety information for Cisco 1040 includes the following sections:

Warning Definition—Statement 1071

Specification	Value or Range
Operating temperature	0� to 40�C (32� to 104�F)
Operating relative humidity	10% to 90% (non-condensing)
Height	3.8 cm (1.5 in.)
Width	24.1 cm (9.5 in.)
Depth	20.3 cm (8 in.)
Weight	.5kg (1.0 lb.)
Power	2.5A, 5vDC
Cables	Two (2) Category 5 cables

Pin Number	Function
1	DSR/RI—Data set ready/ring indicator
2	DCD—Data carrier detect
3	DTR—Data terminal ready
4	SGND—Signal Ground
5	RD—Receive Data
6	TD—Transmit Data
7	CTS—Clear to send
8	RTS—Request to send


Warning	IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS
Waarschuwing	BELANGRIJKE VEILIGHEIDSINSTRUCTIES Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen. BEWAAR DEZE INSTRUCTIES
Varoitus	T�RKEIT� TURVALLISUUSOHJEITA T�m� varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin k�sittelet laitteistoa, huomioi s�hk�piirien k�sittelemiseen liittyv�t riskit ja tutustu onnettomuuksien yleisiin ehk�isytapoihin. Turvallisuusvaroitusten k��nn�kset l�ytyv�t laitteen mukana toimitettujen k��nnettyjen turvallisuusvaroitusten joukosta varoitusten lopussa n�kyvien lausuntonumeroiden avulla. S�ILYT� N�M� OHJEET
Attention	IMPORTANTES INFORMATIONS DE S�CURIT� Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entra�ner des blessures ou des dommages corporels. Avant de travailler sur un �quipement, soyez conscient des dangers li�s aux circuits �lectriques et familiarisez-vous avec les proc�dures couramment utilis�es pour �viter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de s�curit� traduites qui accompagnent cet appareil, r�f�rez-vous au num�ro de l'instruction situ� � la fin de chaque avertissement. CONSERVEZ CES INFORMATIONS
Warnung	WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen f�hren kann. Machen Sie sich vor der Arbeit mit Ger�ten mit den Gefahren elektrischer Schaltungen und den �blichen Verfahren zur Vorbeugung vor Unf�llen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen �bersetzung in den �bersetzten Sicherheitshinweisen, die zusammen mit diesem Ger�t ausgeliefert wurden. BEWAHREN SIE DIESE HINWEISE GUT AUF.
Avvertenza	IMPORTANTI ISTRUZIONI SULLA SICUREZZA Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento. CONSERVARE QUESTE ISTRUZIONI
Advarsel	VIKTIGE SIKKERHETSINSTRUKSJONER Dette advarselssymbolet betyr fare. Du er i en situasjon som kan f�re til skade p� person. F�r du begynner � arbeide med noe av utstyret, m� du v�re oppmerksom p� farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for � forhindre ulykker. Bruk nummeret i slutten av hver advarsel for � finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten. TA VARE P� DISSE INSTRUKSJONENE
Aviso	INSTRU��ES IMPORTANTES DE SEGURAN�A Este s�mbolo de aviso significa perigo. Voc� est� em uma situa��o que poder� ser causadora de les�es corporais. Antes de iniciar a utiliza��o de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos el�tricos e familiarize-se com as pr�ticas habituais de preven��o de acidentes. Utilize o n�mero da instru��o fornecido ao final de cada aviso para localizar sua tradu��o nos avisos de seguran�a traduzidos que acompanham este dispositivo. GUARDE ESTAS INSTRU��ES
�Advertencia!	INSTRUCCIONES IMPORTANTES DE SEGURIDAD Este s�mbolo de aviso indica peligro. Existe riesgo para su integridad f�sica. Antes de manipular cualquier equipo, considere los riesgos de la corriente el�ctrica y familiar�cese con los procedimientos est�ndar de prevenci�n de accidentes. Al final de cada advertencia encontrar� el n�mero que le ayudar� a encontrar el texto traducido en el apartado de traducciones que acompa�a a este dispositivo. GUARDE ESTAS INSTRUCCIONES
Varning!	VIKTIGA S�KERHETSANVISNINGAR Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utf�r arbete p� n�gon utrustning m�ste du vara medveten om farorna med elkretsar och k�nna till vanliga f�rfaranden f�r att f�rebygga olyckor. Anv�nd det nummer som finns i slutet av varje varning f�r att hitta dess �vers�ttning i de �versatta s�kerhetsvarningar som medf�ljer denna anordning. SPARA DESSA ANVISNINGAR

Translated Warnings

This section contains the following warnings translated into multiple languages:

Statement 1004—Installation Instructions


Warning	Read the installation instructions before connecting the system to the power source. Statement 1004
Waarschuwing	Raadpleeg de installatie-instructies voordat u het systeem op de voedingsbron aansluit.
Varoitus	Lue asennusohjeet ennen j�rjestelm�n yhdist�mist� virtal�hteeseen.
Attention	Avant de brancher le syst�me sur la source d'alimentation, consulter les directives d'installation.
Warnung	Vor dem Anschlie�en des Systems an die Stromquelle die Installationsanweisungen lesen.
Avvertenza	Consultare le istruzioni di installazione prima di collegare il sistema all'alimentatore.
Advarsel	Les installasjonsinstruksjonene f�r systemet kobles til str�mkilden.
Aviso	Leia as instru��es de instala��o antes de ligar o sistema � fonte de energia.
�Advertencia!	Lea las instrucciones de instalaci�n antes de conectar el sistema a la red de alimentaci�n.
Varning!	L�s installationsanvisningarna innan du kopplar systemet till str�mf�rs�rjningsenheten.

Statement 1001—Work During Lightning Activity


Warning	Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001
Waarschuwing	Tijdens onweer dat gepaard gaat met bliksem, dient u niet aan het systeem te werken of kabels aan te sluiten of te ontkoppelen.
Varoitus	�l� ty�skentele j�rjestelm�n parissa �l�k� yhdist� tai irrota kaapeleita ukkosilmalla.
Attention	Ne pas travailler sur le syst�me ni brancher ou d�brancher les c�bles pendant un orage.
Warnung	Arbeiten Sie nicht am System und schlie�en Sie keine Kabel an bzw. trennen Sie keine ab, wenn es gewittert.
Avvertenza	Non lavorare sul sistema o collegare oppure scollegare i cavi durante un temporale con fulmini.
Advarsel	Utf�r aldri arbeid p� systemet, eller koble kabler til eller fra systemet n�r det tordner eller lyner.
Aviso	N�o trabalhe no sistema ou ligue e desligue cabos durante per�odos de mau tempo (trovoada).
�Advertencia!	No operar el sistema ni conectar o desconectar cables durante el transcurso de descargas el�ctricas en la atm�sfera.
Varning!	Vid �ska skall du aldrig utf�ra arbete p� systemet eller ansluta eller koppla loss kablar.

Statement 1021—SELV Circuit


Warning	To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021
Waarschuwing	Om elektrische schokken te vermijden, mogen veiligheidscircuits met extra lage spanning (genaamd SELV = Safety Extra-Low Voltage) niet met telefoonnetwerkspanning (TNV) circuits verbonden worden. LAN (Lokaal netwerk) poorten bevatten SELV circuits en WAN (Regionaal netwerk) poorten bevatten TNV circuits. Sommige LAN en WAN poorten gebruiken allebei RJ-45 connectors. Ga voorzichtig te werk wanneer u kabels verbindt.
Varoitus	Jotta v�ltyt s�hk�iskulta, �l� kytke pienj�nnitteisi� SELV-suojapiirej� puhelinverkkoj�nnitett� (TNV) k�ytt�viin virtapiireihin. LAN-portit sis�lt�v�t SELV-piirej� ja WAN-portit puhelinverkkoj�nnitett� k�ytt�vi� piirej�. Osa sek� LAN- ett� WAN-porteista k�ytt�� RJ-45-liittimi�. Ole varovainen kytkiess�si kaapeleita.
Attention	Pour �viter une �lectrocution, ne raccordez pas les circuits de s�curit� basse tension (Safety Extra-Low Voltage ou SELV) � des circuits de tension de r�seau t�l�phonique (Telephone Network Voltage ou TNV). Les ports du r�seau local (LAN) contiennent des circuits SELV et les ports du r�seau longue distance (WAN) sont munis de circuits TNV. Certains ports LAN et WAN utilisent des connecteurs RJ-45. Raccordez les c�bles en prenant toutes les pr�cautions n�cessaires.
Warnung	Zur Vermeidung von Elektroschock die Sicherheits-Kleinspannungs-Stromkreise (SELV-Kreise) nicht an Fernsprechnetzspannungs-Stromkreise (TNV-Kreise) anschlie�en. LAN-Ports enthalten SELV-Kreise, und WAN-Ports enthalten TNV-Kreise. Einige LAN- und WAN-Ports verwenden auch RJ-45-Steckverbinder. Vorsicht beim Anschlie�en von Kabeln.
Avvertenza	Per evitare scosse elettriche, non collegare circuiti di sicurezza a tensione molto bassa (SELV) ai circuiti a tensione di rete telefonica (TNV). Le porte LAN contengono circuiti SELV e le porte WAN contengono circuiti TNV. Alcune porte LAN e WAN fanno uso di connettori RJ-45. Fare attenzione quando si collegano cavi.
Advarsel	Unng� � koble lavspenningskretser (SELV) til kretser for telenettspenning (TNV), slik at du unng�r elektrisk st�t. LAN-utganger inneholder SELV-kretser og WAN-utganger inneholder TNV-kretser. Det finnes b�de LAN-utganger og WAN-utganger som bruker RJ-45-kontakter. V�r forsiktig n�r du kobler kabler.
Aviso	Para evitar choques el�ctricos, n�o conecte os circuitos de seguran�a de baixa tens�o (SELV) aos circuitos de tens�o de rede telef�nica (TNV). As portas LAN cont�m circuitos SELV e as portas WAN cont�m circuitos TNV. Algumas portas LAN e WAN usam conectores RJ-45. Tenha o devido cuidado ao conectar os cabos.
�Advertencia!	Para evitar la sacudida el�ctrica, no conectar circuitos de seguridad de voltaje muy bajo (safety extra-low voltage = SELV) con circuitos de voltaje de red telef�nica (telephone network voltage = TNV). Los puertos de redes de �rea local (local area network = LAN) contienen circuitos SELV, y los puertos de redes de �rea extendida (wide area network = WAN) contienen circuitos TNV. En algunos casos, tanto los puertos LAN como los WAN usan conectores RJ-45. Proceda con precauci�n al conectar los cables.
Varning!	F�r att undvika elektriska st�tar, koppla inte s�kerhetskretsar med extra l�g sp�nning (SELV-kretsar) till kretsar med telefonn�tsp�nning (TNV-kretsar). LAN-portar inneh�ller SELV-kretsar och WAN-portar inneh�ller TNV-kretsar. Vissa LAN- och WAN-portar �r f�rsedda med RJ-45-kontakter. Iaktta f�rsiktighet vid anslutning av kablar.

Statement 1045—Short-circuit Protection

Statement 1074—Comply with Local and National Electrical Codes


Warning	Installation of the equipment must comply with local and national electrical codes. Statement 1074
Waarschuwing	Bij installatie van de apparatuur moet worden voldaan aan de lokale en nationale elektriciteitsvoorschriften.
Varoitus	Laitteisto tulee asentaa paikallisten ja kansallisten s�hk�m��r�ysten mukaisesti.
Attention	L'�quipement doit �tre install� conform�ment aux normes �lectriques nationales et locales.
Warnung	Die Installation der Ger�te muss den Sicherheitsstandards entsprechen.
Avvertenza	L'installazione dell'impianto deve essere conforme ai codici elettrici locali e nazionali.
Advarsel	Installasjon av utstyret m� samsvare med lokale og nasjonale elektrisitetsforskrifter.
Aviso	A instala��o do equipamento tem de estar em conformidade com os c�digos el�ctricos locais e nacionais.
�Advertencia!	La instalaci�n del equipo debe cumplir con las normativas de electricidad locales y nacionales.
Varning!	Installation av utrustningen m�ste ske i enlighet med g�llande elinstallationsf�reskrifter.

Statement 1040—Product Disposal


Warning	Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040
Waarschuwing	Het uiteindelijke wegruimen van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen.
Varoitus	T�m� tuote on h�vitett�v� kansallisten lakien ja m��r�ysten mukaisesti.
Attention	La mise au rebut ou le recyclage de ce produit sont g�n�ralement soumis � des lois et/ou directives de respect de l'environnement. Renseignez-vous aupr�s de l'organisme comp�tent.
Warnung	Die Entsorgung dieses Produkts sollte gem�� allen Bestimmungen und Gesetzen des Landes erfolgen.
Avvertenza	Lo smaltimento di questo prodotto deve essere eseguito secondo le leggi e regolazioni locali.
Advarsel	Endelig kassering av dette produktet skal v�re i henhold til alle relevante nasjonale lover og bestemmelser.
Aviso	Deitar fora este produto em conformidade com todas as leis e regulamentos nacionais.
�Advertencia!	Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales.
Varning!	Vid deponering hanteras produkten enligt g�llande lagar och best�mmelser.





Aviso	O descarte definitivo deste produto deve estar de acordo com todas as leis e regulamenta��es nacionais.
Advarsel	Endelig bortskaffelse af dette produkt skal ske i henhold til g�ldende love og regler.

Statement 353—This Product Must be Connected


Warning	This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source or an IEC60950 compliant limited power source. Statement 353
Waarschuwing	Dit product moet worden verbonden met een stroomvoorziening die compatibel is met PoE (power-over-ethernet) IEEE 802.3af of een beperkte stroomvoorziening die compatibel is met IEC60950.
Varoitus	T�m� tuote on liitett�v� PoE (power-over-ethernet) IEEE 802.3af -yhteensopivaan virtal�hteeseen tai IEC60950-yhteensopivaan rajoitettuun virtal�hteeseen.
Attention	Ce produit doit �tre connect� � une source d'alimentation �lectrique par c�ble Ethernet (PoE) conforme � la norme IEEE 802.3af ou � une source d'alimentation limit�e conforme � la norme IEC60950.
Warnung	Dieses Produkt muss entweder an eine Stromquelle angeschlossen sein, die mit dem IEEE 802.3af-Standard Power-over-Ethernet (PoE) kompatibel ist oder an eine Stromquelle f�r geringe Leistungen, die IEC60950-kompatibel ist.
Avvertenza	Questo prodotto deve essere connesso a una fonte di alimentazione di tipo PoE (power-over-ethernet) conforme a IEEE 802.3af o a una fonte di alimentazione conforme a IEC60950.
Advarsel	Dette produktet m� v�re koblet til en Power-over-Ethernet (PoE) IEEE 802.3af-kompatibel str�mkilde eller en IEC60950-kompatibel begrenset str�mkilde.
Aviso	Este produto tem de estar ligado a uma fonte de alimenta��o compat�vel com a norma IEEE 802.3af, tamb�m conhecida pela sigla Power over Ethernet (PoE), ou a uma fonte de alimenta��o limitada compat�vel com a norma IEC60950.
�Advertencia!	Debe conectar este producto a una fuente de alimentaci�n sobre ethernet (PoE) conforme con el est�ndar IEEE 802.3af, o a una fuente limitada conforme con el est�ndar IEC60950.
Varning!	Denna produkt m�ste vara ansluten till en PoE IEEE 802.3af-kompatibel str�mk�lla eller en IEC60950-kompatibel begr�nsad str�mk�lla.

Statement 19—TN Power Warning


Warning	The device is designed to work with TN power systems. Statement 19
Waarschuwing	Het apparaat is ontworpen om te functioneren met TN energiesystemen.
Varoitus	Koje on suunniteltu toimimaan TN-s�hk�voimaj�rjestelmien yhteydess�.
Attention	Ce dispositif a �t� con�u pour fonctionner avec des syst�mes d'alimentation TN.
Warnung	Das Ger�t ist f�r die Verwendung mit TN-Stromsystemen ausgelegt.
Avvertenza	Il dispositivo � stato progettato per l'uso con sistemi di alimentazione TN.
Advarsel	Utstyret er utfomet til bruk med TN-str�msystemer.
Aviso	O dispositivo foi criado para operar com sistemas de corrente TN.
�Advertencia!	El equipo est� dise�ado para trabajar con sistemas de alimentaci�n tipo TN.
Varning!	Enheten �r konstruerad f�r anv�ndning tillsammans med elkraftssystem av TN-typ.

Statement 331—Power Supply Installation Warning


Warning	The power supply must be placed indoors. Statement 331
Waarschuwing	De stroomtoevoer moet binnen worden geplaatst.
Varoitus	Tehonl�hde on sijoitettava sis�tiloihin.
Attention	Le bloc d'alimentation �lectrique doit �tre plac� � l'int�rieur.
Warnung	Die Stromversorgungsquelle darf nicht im Freien aufgestellt werden.
Avvertenza	L'alimentatore deve essere posto in un luogo interno.
Advarsel	Str�mkilden skal v�re plassert innend�rs.
Aviso	A fonte de alimenta��o deve ser instalada no interior.
�Advertencia!	El suministro de energ�a debe estar ubicado en un lugar cubierto y no al aire libre.
Varning!	Str�mk�llan m�ste vara placerad inomhus.

Statement 353—This Product Must be Connected

Statement 1005—Circuit Breaker


Warning	This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 120 VAC, 15A (U.S./CAN); 240 VAC, 10A (INTERNATIONAL) Statement 1005
Waarschuwing	Dit product is afhankelijk van de installatie van het gebouw voor beveiliging tegen kortsluiting (overstroom). Controleer of de beschermingsinrichting niet meer dan: 120 VAC, 15A (U.S./CAN); 240 VAC, 10A (INTERNATIONAL) is.
Varoitus	T�m� tuote on riippuvainen rakennukseen asennetusta oikosulkusuojauksesta (ylivirtasuojauksesta). Varmista, ett� suojalaitteen mitoitus ei ole yli: 120 VAC, 15A (U.S./CAN); 240 VAC, 10A (INTERNATIONAL)
Attention	Pour ce qui est de la protection contre les courts-circuits (surtension), ce produit d�pend de l'installation �lectrique du local. V�rifiez que le courant nominal du dispositif de protection n'est pas sup�rieur � : 120 VAC, 15A (U.S./CAN); 240 VAC, 10A (INTERNATIONAL)
Warnung	Dieses Produkt ist darauf angewiesen, dass im Geb�ude ein Kurzschluss- bzw. �berstromschutz installiert ist. Stellen Sie sicher, dass der Nennwert der Schutzvorrichtung nicht mehr als: 120 VAC, 15A (U.S./CAN); 240 VAC, 10A (INTERNATIONAL) betr�gt.
Avvertenza	Questo prodotto dipende dall'impianto dell'edificio per quanto riguarda la protezione contro cortocircuiti (sovracorrente). Assicurarsi che il dispositivo di protezione non abbia un rating superiore a: 120 VAC, 15A (U.S./CAN); 240 VAC, 10A (INTERNATIONAL)
Advarsel	Dette produktet er avhengig av bygningens installasjoner av kortslutnings (overstr�m)-beskyttelse. P�se at verneenheten ikke er merket h�yere enn: 120 VAC, 15A (U.S./CAN); 240 VAC, 10A (INTERNATIONAL)
Aviso	Este produto depende das instala��es existentes para prote��o contra curto-circuito (sobrecarga). Assegure-se de que o fus�vel ou disjuntor n�o seja superior a: 120 VAC, 15A (U.S./CAN); 240 VAC, 10A (INTERNATIONAL)
�Advertencia!	Este equipo utiliza el sistema de protecci�n contra cortocircuitos (o sobrecorrientes) del edificio. Aseg�rese de que el dispositivo de protecci�n no sea superior a: 120 VAC, 15A (U.S./CAN); 240 VAC, 10A (INTERNATIONAL)
Varning!	Denna produkt �r beroende av i byggnaden installerat kortslutningsskydd (�verstr�msskydd). Kontrollera att skyddsanordningen inte har h�gre m�rkv�rde �n: 120 VAC, 15A (U.S./CAN); 240 VAC, 10A (INTERNATIONAL)
	120 VAC, 15A (U.S./CAN); 240 VAC, 10A (INTERNATIONAL)
	120 VAC, 15A (U.S./CAN); 240 VAC, 10A (INTERNATIONAL)
	120 VAC, 15A (U.S./CAN); 240 VAC, 10A (INTERNATIONAL)
	120 VAC, 15A (U.S./CAN); 240 VAC, 10A (INTERNATIONAL)

Statement 1019—Main Disconnecting Device


Warning	The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. Statement 1019
Waarschuwing	De combinatie van de stekker en het elektrisch contactpunt moet te allen tijde toegankelijk zijn omdat deze het hoofdmechanisme vormt voor verbreking van de aansluiting.
Varoitus	Pistoke/liitinkohta toimii p��katkaisumekanismina. P��sy siihen on pidett�v� aina esteett�m�n�.
Attention	La combinaison de prise de courant doit �tre accessible � tout moment parce qu'elle fait office de syst�me principal de d�connexion.
Warnung	Der Netzkabelanschlu� am Ger�t mu� jederzeit zug�nglich sein, weil er als prim�re Ausschaltvorrichtung dient.
Avvertenza	Il gruppo spina-presa deve essere sempre accessibile, poich� viene utilizzato come dispositivo di scollegamento principale.
Advarsel	Kombinasjonen st�psel/uttak m� alltid v�re tilgjengelig ettersom den fungerer som hovedfrakoplingsenhet.
Aviso	A combina��o ficha-tomada dever� ser sempre acess�vel, porque funciona como interruptor principal.
�Advertencia!	El conjunto de clavija y toma ha de encontrarse siempre accesible ya que hace las veces de dispositivo de desconexi�n principal.
Varning!	Man m�ste alltid kunna komma �t stickproppen i uttaget, eftersom denna koppling utg�r den huvudsakliga fr�nkopplingsanordningen.

European Directives

Statement 275—Declaration of Conformity with Regard to the Directives 73/23/EEC and 89/336/EEC as amended by Directive 93/68/EEC

For specifics about which standards have been applied, refer to the Declaration of Conformity.


English:	This equipment is in compliance with the essential requirements and other provisions of Directives 73/23/EEC and 89/336/EEC as amended by Directive 93/68/EEC.
Dansk:	Dette udstyr er i overensstemmelse med de ufravigelige hensyn og andre bestemmelser i direktiv 73/23/EEC og 89/336/EEC som �ndred i direktiv 93/68/EEC.
Deutsch:	Dieses Ger�t entspricht den wesentlichen Anforderungen und weiteren Bestimmungen der Richtlinien 73/23/EWG und 89/336/EWG mit der Erg�nzung durch Richtlinie 93/68/EWG.
Espa�ol:	Este equipo cumple con los requisitos esenciales y otras disposiciones de las Directrices 73/23/EEC y 89/336/EEC de acuerdo a las modificaciones de la Directriz 93/68/EEC.

Fran�ais:	Cet appareil remplit les principales conditions requises et autres dispositions des Directives 73/23/EEC et 89/336/EEC, modifi�es par la Directive 93/68/EEC.
�slenska:	�essir b�na�ur samr�mist l�gbo�num kr�fum og ��rum �kv��um tilskipana 73/23/EBE og 89/336/EBE, me� breytingum skv. tilskipun 93/68/EBE.
Italiano:	Questa apparecchiatura � conforme ai requisiti essenziali e altre disposizioni delle Direttive 73/23/EEC e 89/336/EEC modificate con la Direttiva 93/68/EEC.
Nederlands:	Deze apparatuur voldoet aan de belangrijkste eisen en andere voorzieningen van richtlijnen 73/23/EEC en 89/336/EEC zoals gewijzigd door richtlijn 93/68/EEC.
Norsk:	Dette utstyret samsvarer med de vesentligste kravene og andre regler i direktivene 73/23/EEC og 89/336/EEC samt i tilleggsdirektiv 93/68/EEC.
Portugu�s:	Este equipamento satisfaz os requisitos essenciais e outras provis�es das Directivas 73/23/EEC e 89/336/EEC, conforme amendados pela Directiva 93/68/EEC.
	Cisco UnifiedCommunications Sensor CUSM-1040A-2PK
Suomalainen:	T�m� laite on direktiivien 73/23/ETY ja 89/336/ETY (kuten muutettu direktiiviss� 93/68/ETY) keskeisten vaatimusten ja m��r�ysten mukainen.
Svenska:	Denna utrustning uppfyller de v�sentliga kraven och andra villkor i direktiven 73/23/EEC och 89/336/EEC enligt �ndringarna i direktiv 93/68/EEC.

Regulatory Standards Compliance

This section includes all regulatory, safety, and electromagnetic compatibility (EMC) standards. The Cisco 1040 is in compliance with national and international standards as described in Table 3.

Table 3 Regulatory Standards Compliance
Specification	Description
Regulatory Compliance	Products with the CE Marking indicate compliance with the 89/336/EEC and 73/23/EEC directives, which include the safety and EMC standards listed.
Safety	UL 60950 CAN/CSA-C22.2 No. 60950 EN 60950 IEC 60950 AS/NZS 60950
EMC	47CFR Part 15 (FCC) Class B AS/NZS CISPR22 Class B CISPR22 Class B CNS13438 Class B EN55022 Class B ICES003 Class B VCCI Class B EN50082-1 EN61000-6-1 EN55024 EN61000-3-2 EN61000-3-3

For specific details about the years, revisions and relevant amendments please refer to the applicable declaration of conformity available at http://www.cisco.com.

EMC Environmental Conditions for Products Installed in the European Union

The equipment is intended to operate under the following environmental conditions with respect to EMC:

•

Earthing and bonding shall meet the requirements of ETS 300 253 or CCITT K27.

•

AC power distribution shall be one of the following types, where applicable: TN-S and TN-C as defined in IEC 364-3.

In addition, if equipment is operated in a domestic environment, interference may occur.

EMC Class B Notices and Warnings

Class B Notice for FCC

Modifying the equipment without Cisco's authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Class B Notice for Canada

Cet appareil num�rique de la classe B est conforme � la norme NMB-003 du Canada.

Statement 295—Class B Warning for Korea

Statement 157—VCCI Compliance for Class B Equipment

9 Obtaining Documentation

Cisco documentation and additional literature are available on Cisco.com. This section explains the product documentation resources that Cisco offers.

Cisco.com

Product Documentation DVD

The Product Documentation DVD is a library of technical product documentation on a portable medium. The DVD enables you to access installation, configuration, and command guides for Cisco hardware and software products. With the DVD, you have access to the HTML documentation and some of the PDF files found on the Cisco website at this URL:

The Product Documentation DVD is created and released regularly. DVDs are available singly or by subscription. Registered Cisco.com users can order a Product Documentation DVD (product number DOC-DOCDVD= or DOC-DOCDVD=SUB) from Cisco Marketplace at the Product Documentation Store at this URL:

Ordering Documentation

You must be a registered Cisco.com user to access Cisco Marketplace. Registered users may order Cisco documentation at the Product Documentation Store at this URL:

10 Documentation Feedback

You can provide feedback about Cisco technical documentation on the Cisco Support site area by entering your comments in the feedback form available in every online document.

11 Cisco Product Security Overview

A current list of security advisories, security notices, and security responses for Cisco products is available at this URL:

To see security advisories, security notices, and security responses as they are updated in real time, you can subscribe to the Product Security Incident Response Team Really Simple Syndication (PSIRT RSS) feed. Information about how to subscribe to the PSIRT RSS feed is found at this URL:

Reporting Security Problems in Cisco Products

Cisco is committed to delivering secure products. We test our products internally before we release them, and we strive to correct all vulnerabilities quickly. If you think that you have identified a vulnerability in a Cisco product, contact PSIRT:

An emergency is either a condition in which a system is under active attack or a condition for which a severe and urgent security vulnerability should be reported. All other conditions are considered nonemergencies.

Warning	This is a Class B Device and is registered for EMC requirements for residential use. This device can be used not only in residential areas but in all other areas.

Warning	This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.

Tip

We encourage you to use Pretty Good Privacy (PGP) or a compatible product (for example, GnuPG) to encrypt any sensitive information that you send to Cisco. PSIRT can work with information that has been encrypted with PGP versions 2.x through 9.x.

Never use a revoked encryption key or an expired encryption key. The correct public key to use in your correspondence with PSIRT is the one linked in the Contact Summary section of the Security Vulnerability Policy page at this URL:

http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html

The link on this page has the current PGP key ID in use.

If you do not have or use PGP, contact PSIRT to find other means of encrypting the data before sending any sensitive material.

12 Product Alerts and Field Notices

Modifications to or updates about Cisco products are announced in Cisco Product Alerts and Cisco Field Notices. You can receive these announcements by using the Product Alert Tool on Cisco.com. This tool enables you to create a profile and choose those products for which you want to receive information.

To access the Product Alert Tool, you must be a registered Cisco.com user. Registered users can access the tool at this URL:

13 Obtaining Technical Assistance

Cisco Technical Support provides 24-hour-a-day award-winning technical assistance. The Cisco Support website on Cisco.com features extensive online support resources. In addition, if you have a valid Cisco service contract, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not have a valid Cisco service contract, contact your reseller.

Cisco Support Website

The Cisco Support website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The website is available 24 hours a day at this URL:

Access to all tools on the Cisco Support website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a user ID or password, you can register at this URL:

Note Before you submit a request for service online or by phone, use the Cisco Product Identification Tool to locate your product serial number. You can access this tool from the Cisco Support website by clicking the Get Tools & Resources link, clicking the All Tools (A-Z) tab, and then choosing Cisco Product Identification Tool from the alphabetical list. This tool offers three search options: by product ID or model name; by tree view; or, for certain products, by copying and pasting show command output. Search results show an illustration of your product with the serial number label location highlighted. Locate the serial number label on your product and record the information before placing a service call.

Tip

Displaying and Searching on Cisco.com

If you suspect that the browser is not refreshing a web page, force the browser to update the web page by holding down the Ctrl key while pressing F5.

To find technical information, narrow your search to look in technical documentation, not the entire Cisco.com website. After using the Search box on the Cisco.com home page, click the Advanced Search link next to the Search box on the resulting page and then click the Technical Support & Documentation radio button.

To provide feedback about the Cisco.com website or a particular technical document, click Contacts & Feedback at the top of any Cisco.com web page.

Submitting a Service Request

Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and S4 service requests are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Service Request Tool provides recommended solutions. If your issue is not resolved using the recommended resources, your service request is assigned to a Cisco engineer. The TAC Service Request Tool is located at this URL:

For S1 or S2 service requests, or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.

Asia-Pacific: +61 2 8446 7411
Australia: 1 800 805 227
EMEA: +32 2 704 55 55
USA: 1 800 553 2447

Definitions of Service Request Severity

To ensure that all service requests are reported in a standard format, Cisco has established severity definitions.

Severity 1 (S1)—An existing network is "down" or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.

Severity 2 (S2)—Operation of an existing network is severely degraded, or significant aspects of your business operations are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.

Severity 3 (S3)—Operational performance of the network is impaired while most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.

Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.

14 Obtaining Additional Publications and Information

Information about Cisco products, technologies, and network solutions is available from various online and printed sources.

•

The Cisco Online Subscription Center is the website where you can sign up for a variety of Cisco e-mail newsletters and other communications. Create a profile and then select the subscriptions that you would like to receive. To visit the Cisco Online Subscription Center, go to this URL:

•

The Cisco Product Quick Reference Guide is a handy, compact reference tool that includes brief product overviews, key features, sample part numbers, and abbreviated technical specifications for many Cisco products that are sold through channel partners. It is updated twice a year and includes the latest Cisco channel product offerings. To order and find out more about the Cisco Product Quick Reference Guide, go to this URL:

•

Cisco Marketplace provides a variety of Cisco books, reference guides, documentation, and logo merchandise. Visit Cisco Marketplace, the company store, at this URL:

•

Cisco Press publishes a wide range of general networking, training, and certification titles. Both new and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press at this URL:

•

Internet Protocol Journal is a quarterly journal published by Cisco for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:

•

Networking products offered by Cisco, as well as customer support services, can be obtained at this URL:

•

Networking Professionals Connection is an interactive website where networking professionals share questions, suggestions, and information about networking products and technologies with Cisco experts and other networking professionals. Join a discussion at this URL:

•

"What's New in Cisco Documentation" is an online publication that provides information about the latest documentation releases for Cisco products. Updated monthly, this online publication is organized by product category to direct you quickly to the documentation for your products. You can view the latest release of "What's New in Cisco Documentation" at this URL:

•

World-class networking training is available from Cisco. You can view current offerings at this URL:

Table Of Contents

Quick Start