|
|
This appendix contains the following sections:
This section provides four samples the service point configuration in a router configuration file. The samples provided are:
The following is an example of the lines that would appear in the configuration file of a router with an interface configured through a local ring to 3745 Token Ring Interface Connector:
!
sna host CWBC02 xid-snd 05dcc002 rmac 4001.3745.1088 rsap 4 lsap 4 focalpoint !
interface TokenRing0/1
ip address 172.18.9.129 255.255.255.240
ring-speed 16
sna enable-host lsap 4
sna start CWBC02
!
The following is an example of the lines that would appear in the configuration file of a router that contains a CIP with an interface configured for RSRB:
!
dspu rsrb 325 1 900 4000.7000.0001
dspu rsrb enable-host lsap 4
!
dspu host CWBC01 xid-snd 05dcc001 rmac 4000.3333.4444 rsap 4 lsap 4 focalpoint
!
dspu rsrb start CWBC01
!
interface Channel4/1
no ip address
no keepalive
csna C010 C0
!
interface Channel4/2
ip address 172.18.9.145 255.255.255.240
no keepalive
lan TokenRing 0
source-bridge 28 1 900
adapter 4 4000.3333.4444
The following is an example of the lines that would appear in the configuration file of a router with an interface configured with DSPU with RSRB:
source-bridge ring-group 600
source-bridge remote-peer 600 tcp 172.18.9.19
!
dspu host CWBC09 xid-snd 05dcc009 rmac 4001.3745.1089 rsap 4 lsap 4 focalpoint dspu pool lupool host CWBC09 lu 2 16
!
dspu pu DSPUPC8 xid-rcv 05dcca18
dspu lu 2 9 pool lupool
!
interface TokenRing0
ip address 172.18.9.19 255.255.255.240
ring-speed 16
multiring all
source-bridge 85 3 600
dspu enable-host lsap 4
dspu start CWBC09
The following is an example of the lines that would appear in the configuration file of a router with RSRB and an interface configured with Loopback:
!
source-bridge ring-group 600
source-bridge remote-peer 600 tcp 172.18.10.97
source-bridge remote-peer 600 tcp 172.18.10.98
!
sna rsrb 1011 3 600 4000.ffff.00cb
sna rsrb enable-host lsap 4
!
sna host CWBC0B xid-snd 05dcc00b rmac 4001.3745.1089 rsap 4 lsap 4 focalpoint sna rsrb start CWBC0B
!
interface Loopback0
ip address 172.18.10.97 255.255.255.252
!
The following tables list the NSP direct access storage device (DASD) requirements:
In the NSP DASD tables, the following terms are used:
The following table lists the recommended storage requirements for the NSP installation.
| Data Set Name | Tracks | Device |
|---|---|---|
| NETMV1R2.NSPNCL1 | 32 | 9345 |
| NETMV1R2.NSPNCL2 | 22 | 9345 |
| NETMV1R2.NSPPNLS | 10 | 9345 |
| NETMV1R2.NSPSAMP | 2 | 9345 |
| NETMNCL1.SEQ | 28 | 9345 |
| NETMNCL2.SEQ | 19 | 9345 |
| NETMPNLS.SEQ | 8 | 9345 |
| NETMSAMP.SEQ | 1 | 9345 |
The following table lists the recommended storage requirements for NSP production.
| Name | Tracks | Device |
|---|---|---|
| NETMASTR.USER.EXECS (CLISTS1 and CLISTS2) | 60 | 9345 |
| NETMASTR.USER.PANLUSR (user defined) |
The following table lists the recommended VSAM storage requirements for NSP.
| Name | Tracks | Device |
|---|---|---|
| NETMASTR.NSP.CONFIGA | 75 | 9345 |
| NETMASTR.NSP.NSPHISTH | 75 | 9345 |
| NETMASTR.NSP.NSPHISTI | 150 | 9345 |
| NETMASTR.NSP.NSPHISTC | 75 | 9345 |
| NETMASTR.NSP.NSPHISTP | 75 | 9345 |
| NETMASTR.NSP.NSPHISTR | 150 | 9345 |
The following table lists the recommended VSAM requirements for NSP configuration.
| Name | Records |
|---|---|
| Setup Definition | 1 |
| Router Management | 1 per router |
| Interface Management | 1 per interface |
| Operator Security | 1 per operator |
| DSPU Management | 1 per VTAM DSPU |
| Router Statistics | 1 header record plus wrap-count per router |
| Interface Statistics | 1 header record plus wrap-count per interface |
| Interface Performance | 1 header record plus wrap-count per interface |
| SNA View RIF History | 1 header record plus wrap-count per PU |
| Router Configuration | 1 header record plus 1 record per configuration statement |
|
|