Table Of Contents

Supported Devices and Software Versions for Management Center for IPS Sensors 2.1

Supported Devices and Software Versions for Management Center for IPS Sensors 2.1

---

Revised: October 7, 2005

Table 1 shows the devices supported by Management Center for IPS Sensors 2.1.

You can find information about new device support at http://www.cisco.com.

To see a list of packages installed on your CiscoWorks server, select Server Configuration > About the Server > Applications and Versions. Then, click the application name in the Applications Installed table.

Table 1 Supported Devices

Type of Device	Devices Supported	Software
Cisco Network IPS Sensor Appliances	IDS-4210	IDS 4.0, IDS 4.1, and IPS 5.0
	IDS-4215	IDS 4.1 and IPS 5.0
	IDS-4220	IDS 4.0 and IDS 4.1
	IDS-4230	IDS 4.0 and IDS 4.1
	IDS-4235	IDS 4.0, IDS 4.1, and IPS 5.0
	IDS-4240	IDS 4.1 and IPS 5.0
	IDS-4250-TX and IDS-4250-SX	IDS 4.0, IDS 4.1, and IPS 5.0
	IDS-4250-XL	IDS 4.0, IDS 4.1, and IPS 5.0
	IDS-4255	IDS 4.1, and IPS 5.0
Cisco Adaptive Security Appliances (ASA)	5510	IPS 5.0
	5520	IPS 5.0
	5540	IPS 5.0
Cisco Switch IDS Sensor Modules	IDSM2	IDS 4.0, IDS 4.1, and IPS 5.0
Cisco IOS Routers (Cisco IOS IDS Devices)	Release IOS 12.3(14)T1 devices with Security Software feature set: Advanced Security	IOS 12.3(14)T1
Cisco Integrated Services Routers (ISR)	1841, 2801, 2811, 2851, and 3845	Cisco IOS Software Release with 12.3(14)T1 with IOS IPS support
Cisco IOS Router IDS Sensor Module	NM-CIDS	IDS 4.1 and IPS 5.0

Posted: Fri Oct 7 07:29:25 PDT 2005
All contents are Copyright © 1992--2005 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.