|
Table Of Contents
Supported Devices Table for
WAN Performance Utility 2.0Verifying Your Cisco IOS IP SLA Version
Supported Devices Table for
WAN Performance Utility 2.0
Revised: February 28, 2005
WPU can run studies on all devices running Cisco IOS IP SLA (IP SLA) version 2.1.0 or later. For details on determining the IP SLA version on your device, see Verifying Your Cisco IOS IP SLA Version.
The following tables do not contain all the devices that WPU supports. The devices listed are those that were specifically tested with WPU.
WPU supports all devices that run IP SLA version 2.1.0 or later. To determine which devices run IP SLA, you can use the Feature Navigator and search for Service Assurance Agent SNMP Support. Feature Navigator is located at the following location: http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp.
The device families listed in the following tables can be used as source devices for studies:
• Table 7, Voice Application Systems
Table 1 Access Servers
Series Devices Tested SysObjectIDCisco AS5200 Series Universal Access Servers
AS5200
1.3.6.1.4.1.9.1.109
Table 2 Cable Products
Series Device Tested SysObjectIDCisco uBR7100 Series Broadband Routers
UBR7100-K1P-M
1.3.6.1.4.1.9.1.347
Cisco uBR7200 Series Broadband Routers
UBR7246
1.3.6.1.4.1.9.1.179
Table 7 Voice Application Systems
Series Devices Tested SysObjectIDCisco ICS 7700 Series Integrated Communications Systems
Cisco Multiservice Route Processor 300 (MRP 300)
1.3.6.1.4.1.9.1.456
Table 8 Voice Gateways
Series Devices Supported SysObjectIDCisco IAD 2400 Series Integrated Access Devices
IAD2420-A2I8K8SV5-M
1.3.6.1.4.1.9.1.362
Verifying Your Cisco IOS IP SLA Version
To verify whether Cisco IOS IP SLA is running on your device (and what version), do the following:
Step 1 On your device run the command:
show rtr application
The expected output is:
Response Time Reporter
Version: 2.1.1 Round Trip Time MIB
Max Packet Data Size (ARR and Data): 16384
Time of Last Change in Whole RTR: *05:14:20.000 UTC Thu Jul 1 1993
System Max Number of Entries: 500
Number of Entries configured: 180
Number of active Entries: 177
Number of pending Entries: 0
Number of inactive Entries: 3
Supported Operation Types
Type of Operation to Perform: echo
Type of Operation to Perform: pathEcho
Type of Operation to Perform: udpEcho
Type of Operation to Perform: tcpConnect
Type of Operation to Perform: http
Type of Operation to Perform: dns
Type of Operation to Perform: jitter
Type of Operation to Perform: dlsw
Type of Operation to Perform: dhcp
Supported Protocols
Protocol Type: ipIcmpEcho
Protocol Type: ipUdpEchoAppl
Protocol Type: ipTcpConn
Protocol Type: httpAppl
Protocol Type: dnsAppl
Protocol Type: jitterAppl
Protocol Type: dhcp
Step 2 Locate the Version. For the device to be supported by WPU, it must say 2.1.0 (or later).
Posted: Wed Mar 2 10:43:20 PST 2005
All contents are Copyright © 1992--2005 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.