|
|
Revised: August 1, 2001
 |
Note This table also applies to supported devices for Content Flow Monitor 1.2. |
The following tables show the devices supported when Content Flow Monitor 1.1 was released:
You can find information about new device support from CCO at www.cisco.com.
To see a list of packages installed on your CiscoWorks2000 server, select Server Configuration> About the Server> Applications and Versions. Then click the application name in the Applications Installed table.
| Device Type | Series | Devices Supported | Minimum Software |
Server Load Balancing | Cisco 7200 | 7204VXR, 7206, 7206VXR | IOS 12.0(7)XE1 |
IOS 12.0(5)T |
| Device Type | Series | Devices Supported | Minimum Software |
Forwarding Agents | Catalyst 5000 Series | 5000 with RSM1 | IOS 12.0(5)T |
Server Load Balancing | Catalyst 6000 Series | 6000 with MSFC2 | IOS 12.0(7)XE1 |
6000 with PFC | IOS 12.0(7)XE1 | ||
Calatyst 4840G | 4840G | IOS 12.0(7)XE1 |
| 1Not tested 2The MSFC card requires only the following image: Cat6KMSFC-Boot-M. |
| Device Type | Series | Devices Supported | Minimum Software1 |
Server Load Balancing | Cisco LocalDirector | 416 | 3.2.1 |
4302 | 3.2.1 |
| 1LocalDirector 4.x is not supported 2Not tested |
Posted: Mon Aug 6 18:05:14 PDT 2001
All contents are Copyright © 1992--2001 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.