cc/td/doc/product/rtrmgmt/cvdmcsm
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table Of Contents

Configuring CVDM-CSM

Understanding Wizards

Basic Setup Wizard

Welcome Page

Configuring Client and Server Side VLAN

Configuring Virtual Server

Configuring Default Policy

Summary

Advanced Setup Wizard

Welcome Page

Configuring Layer 7 Policies

How Do I?

How Do I Set Up a Virtual Server with Default Policy?

How Do I Set Up a Virtual Server with Layer 7 Policy?


Configuring CVDM-CSM


The CVDM-CSM Manager allows user to setup the CSM module features with the help of wizards, which simplifies the complex configuration.

This section includes the following topics:

Understanding Wizards

Basic Setup Wizard

Advanced Setup Wizard

How Do I?

Understanding Wizards

CVDM-CSM Manager allows you to choose between two types of setup wizards:

Basic Setup Wizard

Advanced Setup Wizard

To choose between the two Wizards:


Step 1 Click Setup from the task bar. The Setup page appears.

Step 2 Click Wizards in the left-most pane. The setup wizards information appears in the content area.

Step 3 You can select either of the following two wizards:

Basic Setup Wizard

Advanced Setup Wizard

Step 4 Click Launch Selected Task to launch the corresponding wizard.


Basic Setup Wizard

The Basic Setup Wizard allows you to configure client and server VLANs and also create Layer 4 policies.

Figure 2-1 Basic Setup Wizard Page

Welcome Page

The Welcome page lists the three basic configuration steps:

Configuring Client and Server Side VLAN

Configuring Virtual Server

Configuring Default Policy

Configuring Client and Server Side VLAN

Both wizards allows you to create Client side VLAN and Server side VLANs by specifying IP address, alias IP address, gateway and static route values.

To do this:


Step 1 Click Setup from the task bar, then click Wizards in the left-most pane.

Step 2 The Setup Wizards information appears in the content area.

Step 3 You can select any of the following two wizards:

Basic Setup Wizard

Advanced Setup Wizard.

Step 4 Click Launch Selected Task to launch the corresponding wizard dialog. The Welcome page appears.

Step 5 Select Configure Client and Server Side VLAN. The Configure Client and Server Side VLAN dialog box appears.

The following fields appear in the Configure Client and Server Side VLAN dialog box:

Field
Action/Description
Client VLAN

VLAN ID

Specify the ID of the VLAN. You can create a new VLAN or choose from an available VLAN.

Click and select of the following:

Select VLAN to select a VLAN from a list.

Create VLAN to create a VLAN by entering the VLAN ID.

IP Address

Enter the IP address of the VLAN. Only one management IP address is allowed per VLAN.

Alias

Enter the alias IP address. You can configure up to 255 aliases per VLAN. When more than one alias IP address is listed, they will appear serially separated by a comma.

Click and select Add Alias. The Add Alias dialog box appears. Enter the alias IP address.

Gateways

From the list, select the gateway for the VLAN. You can configure up to seven gateways per VLAN, with a total of up to 255 gateways for the entire system. A gateway must be in the same network as specified in the IP address. When more than one gateway IP address is listed, they will appear serially separated by a comma.

Click and select Add Gateways. The Add Gateways dialog box appears. Enter the Gateway IP address.

Static Routes

Specify the static route. When more than one static route is listed, they will appear serially separated by a comma.

Click and select Add Static Route to add a static route from a list. For more information on adding static route, see "Adding Static Route" section.

Server VLAN

VLAN ID

Specify the ID of the VLAN. You can create a new VLAN or choose from an available VLAN.

Click and select one of the following:

Select VLAN to select a VLAN from a list.

Create VLAN to create a VLAN by entering the VLAN ID.

IP Address

Enter the IP address for the CVDM-CSM.

Alias

Enter the alias IP address. When more than one alias IP address is listed, they will appear serially separated by a comma.

Click and select Add Alias. The Add Alias dialog box appears. Enter the alias IP address.

Mask

From the list, select the IP mask to be applied. You can choose from Class A, Class B, Class A and Class D masks.

If it is not specified, the default for network mask is 255.255.255.255.

Gateways

From the list, select the gateway for the VLAN. You can configure up to seven gateways per VLAN, with a total of up to 255 gateways for the entire system. A gateway must be in the same network as specified in the ip address. When more than one gateway IP address is listed, they will appear serially separated by a comma.

Click and select Add Gateways. The Add Gateways dialog box appears. Enter the Gateway IP address.

Static Routes

Specify the static route. When more than one static route is listed, they will appear serially separated by a comma.

Click and select Add Static Route to add a static route from a list. For more information on adding static route, see "Adding Static Route" section.


Adding Static Route

The following fields appear:

Field
Description

Destination IP

Enter the IP address of the destination.

Mask

From the list, select the mask to be applied. You can choose from Class A, Class B, Class A and Class D masks.

If it is not specified, the default for network mask is 255.255.255.255.

Next Hop

Enter the IP address of the next hop.



Configuring Virtual Server

To configure a virtual server:


Step 1 Click Setup from the task bar, then click Wizards in the left-most pane. The Setup Wizards information appears in the content area.

Step 2 You can select any of the following two wizards:

Basic Setup Wizard

Advanced Setup Wizard.

Step 3 Click Launch Selected Task to launch the corresponding wizard dialog. The Welcome page appears.

Step 4 Click Next. The Configure Client and Server Side VLAN dialog box appears.

Step 5 Click Next. The Configure Virtual Server dialog box appears.

The following fields appear in the Configure Virtual Server dialog box:

Field
Description

Virtual Server

Click and select one of the following:

Select Virtual Server to select a Virtual Server from a list.

Create Virtual Server to create a Virtual Server by entering the name of the Virtual Server.

Virtual IP Address

IP Address

Enter the IP address of the Virtual Sever.

Mask

Mask for the IP address to allow connections to an entire network. The default IP mask is 255.255.255.255.

Protocol

From the list, select the load-balancing protocol.

Allow Traffic from VLAN

From the list, select the VLAN from which traffic is enabled.

Port

From the list, select the port.

This field is enabled only when you choose TCP or UDP as the protocol.

Service Type

From the list, select service type.



Configuring Default Policy

You can configure multiple real servers and associate them to the server farm, and delete the association of the existing real server.


Step 1 Click Setup from the taskbar, click Wizards in the left-most pane. The Setup Wizards information appears in the content area.

Step 2 You can select any of the following two wizards:

Basic Setup Wizard

Advanced Setup Wizard.

Step 3 Click Launch Selected Task to launch the corresponding wizard dialog. The Welcome page appears.

Step 4 Click Next. The Configure Client and Server Side VLAN dialog box appears.

Step 5 Click Next. The Configure Virtual Server dialog box appears.

Step 6 Click Next. The Configure Default Policy dialog box appears.

In case of the Advanced Setup Wizard you will have to Configure Layer 7 Policies to reach the Default policy dialog box.

The following fields appear in the Configure Default Policy dialog box:

Field
Description

Default Server Farm

Click and select one of the following:

Select Server Farm to select a Virtual Server from a list.

Create Server Farm to create a Server Farm by entering the name of the Server Farm.

Associated Real Servers

Real

The Real Server associated to the server farms.

Minimum Connections

Minimum number of connections for the real server.

Maximum Connections

Maximum number of connections for the real server.

Weight

Weight assigned to the real server. The weight identifies the capacity of the real server compared to other real servers in the server farm.

Admin Status

Lets you know the admin status of the real server.


From the Configure Default Policy page, you can access functions to do the following:

Click Add and do either of the following:

Choose Select Named Real Server Farm to choose a real server from a list. For more information on adding a named Real Server, see "Adding Named Real Server" section on page 5-17.

Choose Create Unnamed Real Server Farm to create a Server Farm. For more information on adding an unnamed Real Server, see "Adding Unnamed Real Server" section on page 5-20.

Click Edit to edit the selected Real Server. For more information on editing a Real Server, see "Editing a Real Server" section on page 6-9.

Click Delete to delete the selected Real Server.


Summary

You can see a list of all the generated CLI commands that are delivered to the device after you click the Finish button.


Step 1 Click Setup from the taskbar, click Wizards in the left-most pane. The Setup Wizards information appears in the content area.

Step 2 You can select any of the following two wizards:

Basic Setup Wizard

Advanced Setup Wizard

Step 3 Click Launch Selected Task to launch the corresponding wizard dialog. The Welcome page appears.

Step 4 Click Next. The Configure Client and Server Side VLAN dialog box appears.

Step 5 Click Next. The Configure Virtual Server dialog box appears.

In case of the Advanced Setup Wizard you will have to Configure Layer 7 Policies then click Next.

Step 6 Click Next. The Configure Default Policy dialog box appears.

Step 7 Click Next. The Summary dialog box appears.


Delivering a Configuration to the Switch or Module

You can preview CLI commands that will be delivered to the device after you click the Finish button.

From the Deliver Configuration to Switch/Module(s) page, you can do the following:

Deliver the CLI commands immediately to the device or module.

Deliver the CLI commands at a later time to the device or module.

Save the CLI commands immediately to the device or module.

Advanced Setup Wizard

The Advanced Setup Wizard allows you to configure client and server VLANs and also create layer 4 to layer 7 policies.

Figure 2-2 Advanced Wizards Page

Welcome Page

The welcome page lists the four advanced configuration steps:

Configuring Client and Server Side VLAN

Configuring Virtual Server

Configuring Layer 7 Policies

Configuring Default Policy

Configuring Layer 7 Policies

You can create and associate layer 7 policies to the Virtual Server. You can view the already associated Policies, add new ones, delete existing policies, and also change the order of the policies.

You can configure the policy, and also configure and associate the following to the policy:

One map of each type (URL, Header, Cookie and Return Code).

One sticky group of any type (Cookie, SSL, NetMask or Header).

One client group.

To do this:


Step 1 Click Setup from the taskbar, click Wizards in the left-most pane. The Setup Wizards information appears in the content area.

Step 2 Select Advanced Setup Wizard.

Step 3 Click Launch Selected Task to launch the corresponding wizard dialog box. The Welcome dialog appears. Click Next.

Step 4 The Configure Client and Server Side VLAN dialog box appears. Click Next.

Step 5 The Configure Virtual Server dialog box appears. Click Next.

Step 6 The Configure and Associate Layer 7 Policies dialog box appears. From this page, you can access functions to do the following:

Click Add and select one of the following:

Select Policy to select from a list of configured policies.

Create Policy to add a new policy. For more information on creating policies, see "Adding Policies" section on page 7-4.

Select a policy and click Delete to remove policies from the Virtual Server.

Click the Up button to move the policies up in the list.

Click the Down buton to move the policies down in the list.


Note Be sure to order the policies in the correct order. The traffic will be routed based on the order of policies.



How Do I?

This section describes how to perform a task. The following questions are answered:

How Do I Set Up a Virtual Server with Default Policy?

How Do I Set Up a Virtual Server with Layer 7 Policy?

How Do I Set Up a Virtual Server with Default Policy?

The Basic Setup Wizard allows you to configure and associate multiple Real Servers to the Server Farm and delete the association of the existing Real Server.

To setup a virtual server with the default policy:


Step 1 Click Setup from the taskbar, click Wizards in the left-most pane. The Setup Wizards information appears in the content area.

Step 2 Select Basic Setup Wizard, then click Launch Selected Task. The Welcome page appears.

Step 3 Click Next. The Configure Client and Server Side VLAN dialog box appears.

Step 4 Click Next. The Configure Virtual Server dialog box appears.

Step 5 Click Next. The Configure Default Policy dialog box appears.

Step 6 Configure the default server farm or specify one from the list.

Click and select one of the following:

Select Server Farm to select a Virtual Server from a list.

Create Server Farm to create a Server Farm by entering the name of the Server Farm.


Related Topics:

Configuring Client and Server Side VLAN

Configuring Virtual Server

Configuring Default Policy

How Do I Set Up a Virtual Server with Layer 7 Policy?

How Do I Set Up a Virtual Server with Layer 7 Policy?

The Advanced Setup Wizard allows you to configure client and server VLANs and create layer 4 to layer 7 policies.

To setup a virtual server with Layer 7 policy:


Step 1 Click Setup from the task bar, click Wizards in the left-most pane. The Setup Wizards information appears in the content area.

Step 2 Select Advanced Setup Wizard, then click Launch Selected Task. The Welcome page appears.

Step 3 Click Next. The Configure Client and Server Side VLAN dialog box appears.

Step 4 Click Next. The Configure Virtual Server dialog box appears.

Step 5 Click Next. The Configure and Associate Layer 7 Policies dialog box appears.

Configure the virtual server or specify one from the list, and associate the required maps, Sticky group and a Client group.


Related Topics:

Configuring Client and Server Side VLAN

Configuring Virtual Server

Configuring Layer 7 Policies

How Do I Set Up a Virtual Server with Default Policy?


hometocprevnextglossaryfeedbacksearchhelp

Posted: Fri Oct 7 00:15:02 PDT 2005
All contents are Copyright © 1992--2005 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.