Cisco 12000/10720 Router Manager Quick Start Guide, 3.1

Table Of Contents

Cisco 12000/10720 v3.1 Router Manager

Take Out the CD-ROMs

Locate the Documents

System Requirements

Get a Cisco EMF License

Install Cisco EMF Server

Install Patches 5 and 5.2

Install the RME Server

Install RME Add-on

Install Cisco CNS / Cisco EMF Integration Patch

Start Cisco EMF

Install the EMS

Start a User Session

Quick Start Guide

Cisco 12000/10720 v3.1 Router Manager

The Cisco 12000/10720 Manager is an element management system (EMS) for configuration and troubleshooting core IP/MPLS networks basd upon 12000 and 10720 routers. This EMS supports up to and including Cisco IOS 12.0(25)S as well as a wide range of line cards. Please consult the documentation for complete details.

This new release, version 3.1, includes new management feature support for OSPF and BGP configuration, VRF configuration, MPLS troubleshooting capability and ATM Operations And Management (OAM) and inclues all features of the Cisco Element Manager November 2002 upgrade release (Cisco EMF SP4), including CiscoWorks Resource Management Essentials for network element administration tasks

This document only provides a high-level overview of a new EMS installation, and startup, and is just one of the documents you should use. For comprehensive installation or upgrade procedures, refer to the Cisco 12000/10720 v3.1 Router Manager Release Notes, and the Cisco 12000/10720 v3.1 Router Manager Installation and Configuration Guide.

1 Take Out the CD-ROMs

•Cisco Element Management Framework Version 3.2 CD#1

•Cisco Element Management Framework Version 3.2 SP4 CD#2

•CiscoWorks 5th edition for Solaris and Resource Manager Essentials 3.4 and 3.4.1 for Solaris (CD#1 and CD#2)
or
CiscoWorks 5th edition for Windows and Resource Manager Essentials 3.4 and 3.4.1 for Windows (CD#1 and CD#2)

•Cisco 12000/10720 Router Manager CD

2 Locate the Documents

The documents are available in PDF format on the Cisco Element Management Framework Version 3.2 SP4 CD#2 and the Cisco 12000/10720 Router Manager CD.

You can download the documents as follows:

•Cisco Element Management Framework Release Note Version 3.2 Service Pack 4 http://www.cisco.com/en/US/products/sw/netmgtsw/ps829/prod_release_note09186a0080128a9c.html

•Cisco 12000/10720 v3.1 Router Manager Release Note http://www.cisco.com/en/US/products/sw/netmgtsw/ps156/prod_release_notes_list.html

•Cisco 12000/10720 v3.1 Router Manager Installation and Configuration Guide http://www.cisco.com/en/US/products/sw/netmgtsw/ps156/products_installation_and_configuration_guide_books_list.html

•Cisco 12000/10720 v3.1 Router Manager User Guide http://www.cisco.com/en/US/products/sw/netmgtsw/ps156/products_user_guide_book_list.html

•Cisco Element Management Framework User Guide Version 3.2 Service Pack 4 http://www.cisco.com/en/US/products/sw/netmgtsw/ps829/products_user_guide_book09186a00800ffd02.html

•Online help is available in your EMS.

Associated documents are available on Cisco.com

•Resource Manager Essentials from http://www.cisco.com/en/US/products/sw/cscowork/ps2073/index.html

•CNS 2100 Series Intelligence Engine from http://www.cisco.com/en/US/products/sw/netmgtsw/ps4617/index.html

3 System Requirements

The Cisco-Sun hardware reference configurations for Cisco Element Managers are detailed in http://www.cisco.com/warp/public/756/partnership/sun/products/Cisco_RefModel_Descriptions_CEM.pdf. Do not order hardware until you have referred to this.

4 Get a Cisco EMF License

Step 1 Go to the Software Registration page at:
http://cco.cisco.com/pcgi-bin/Software/FormManager/formgenerator.pl

Step 2 Click CEMF Product License.

Step 3 Enter your Contact Information.

Step 4 In the Version number field, choose 3.2.

Step 5 Enter the Product Authorization Key (PAK) number provided on the sleeve of the Cisco EMF product CD-ROM.

Step 6 Enter the hostname of the server where Cisco EMF will be installed.

Step 7 Enter the host ID (a hexadecimal string that identifies the system—not the IP address) of the server where Cisco EMF will be installed.

Note To get the host ID (at the Unix prompt) enter hostid

Step 8 Enter responses to the remaining questions.

Step 9 Click Submit.

To update a Cisco EMF license currently in use, (to extend an evaluation license, or convert an evaluation license to a permanent license), refer to the Cisco 12000/10720 v3.1 Router Manager Installation and Configuration Guide.

5 Install Cisco EMF Server

Use the following procedures when this is a new installation.

First install the server (consisting of the server processes and a local client) followed by the client (if necessary).

To install the Cisco EMF client, and for upgrade instructions, refer to the Installation and Configuration Guide.

Step 1 Log in as superuser (su) to the server where Cisco EMF is to be installed.

Step 2 Insert Cisco EMF CD#1 into the CD-ROM drive.

Step 3 Enter:
host# cd /cdrom/cdrom0
host# ./cemfinstall

Step 4 Choose Server installation option.

Step 5 Enter a directory for the installation files (default is /opt/cemf). This directory is referred to as <CEMF_ROOT>.

Step 6 Enter a directory for backing up and restoring data (default is /opt/Backup).

Note For best performance, we recommend you install the databases on separate disks, and use RAWFS in certain circumstances. Refer to Chapter 5 in the Cisco EMF Installation and Administration Guide.

Step 7 Enter the server hostname and server IP address.

Step 8 Configure the ObjectStore option for your installation.

Step 9 Place the transaction log on a different drive from the installation and database files.

Note Do not store the transact.log file in /tmp as a reboot will remove any files in this area.

Step 10 Accept the default DNS domain for your server. Cisco EMF will work on a system without DNS.

Step 11 Enter the full path name of the
Cisco EMF license file.

Step 12 When the installation is complete, cd out of the directory /cdrom/cdrom0 and enter eject.

6 Install Patches 5 and 5.2

Download and untar Cisco EMF Patch 5 (170005-11) and Cisco EMF Patch 5.2 (190502-05). From http://www.cisco.com/public/sw-center/sw-netmgmt.shtml, click Login. From the list, select CEMF Patches for Deployed Software, then click CEMF 3.2.

Note Patches are tarred using the Solaris tar command, and compressed using the standard Solaris compress command.

Step 1 Locate the patch that you have downloaded, cd to the location. For example, change to the CEMF_3.2_PATCH_5 directory.

Step 2 Start the installation script. At the command line prompt, enter ./cemfinstall

Step 3 Choose the installation option. Install Patch 5 first, then Patch 5.2. Patches must be installed for the server and all clients on the network.

7 Install the RME Server

Step 1 Decide if you want to run RME co-resident with your EMS or on a separate workstation (Sun or PC). RME cannot be co-resident with Cisco EMF on Solaris 2.6.

Step 2 Install CD-One (CiscoWorks2000), choose install option 4

Step 3 Install RME. On Solaris, enter:
# cd /cdrom/cdrom0/
# ./setup.sh
Enter 3 and press Return.
On PC, insert the CD-ROM, the Installer window appears. Click Install. In the Wizard, select the Typical installation.

Note Refer to Installation and Setup Guide for Resource Manager Essentials on Solaris. URL: http://www.cisco.com/en/US/products/sw/cscowork/ps2073/prod_instructions_guides.html

8 Install RME Add-on

The RME add-on is a separate software package which is installed on top of an existing CiscoWorks 2000 CD-One and RME 3.4 installation.

Step 1 On Solaris, insert Cisco EMF CD#2 and change directory to the cdrom area. Enter cd rme/solaris, then enter ./install.

Step 2 On a PC where CiscoWorks and RME 3.4 are installed, insert Cisco EMF CD#2 and run the rme/windows/setup.exe file.

9 Install Cisco CNS / Cisco EMF Integration Patch

This patch must be installed on the CNS 2100 Series Intelligence Engine. Install CNS patch 1.2.3 first then the Cisco CNS/Cisco EMF Integration patch. The Cisco 2100 Series device must be set-up.

Step 1 Insert Cisco EMF CD#2. In cns/linux directory, list the packages installed on the CNS 2100 Series, enter rpm -qa | grep CSCO. If patch is detected, remove it, enter rpm -e CSCOcnsiepatch-1.0-1 (This is an example.)

Step 2 Copy Linux RPM package file. Note file name and location. From the directory, enter rpm -i CSCOcnsiepatch-1.0-1.i386.rpm (This is an example.) The file name must match the copied file. Restart the web server, enter /sbin/service httpd restart

Note Refer to the Cisco 12000/10720 v3.1 Route Manager Installation and Configuration Guide.

10 Start Cisco EMF

Step 1 Log in to the server where Cisco EMF is installed.

Step 2 Change to the Cisco EMF bin directory:
cd <CEMF_ROOT>/bin where <CEMF_ROOT> is the directory where Cisco EMF is installed. Enter ./cemf start

11 Install the EMS

To install a Cisco 12000/10720 v3.1 Router Manager:

Step 1 Log in as superuser (su) to the server where Cisco EMF is installed.

Step 2 Insert Cisco 12000/10720 Router Manager product CD into the CD-ROM drive.

Step 3 Enter:
host# cd /cdrom/cdrom0
host# cd c12k-10720_3.1
host# ./c12kminstall

Step 4 Choose the installation option.

12 Start a User Session

Step 1 Start a user session enter ./cemf session.

Step 2 Log in as an admin user and enter the admin (default login). The session starts and the Launchpad window is displayed.