|
|
This appendix provide instructions on how to mount a CD-ROM from a local or remote system so you that can install and configure CiscoWorks Blue Maps or CiscoWorks Blue SNA View on a workstation.
Also, this appendix covers how to export the CD-ROM from a remote workstation and then mount it on the local workstation.
This appendix contains the following main sections:
You can install CiscoWorks Blue Maps and SNA View from a CD-ROM drive attached to your system or from a drive connected to a remote system. You must first mount the local or remote device on the local system.
 |
Caution Avoid exposing the CD-ROM to direct sunlight because it could harm the contents. |
To install from a CD-ROM, perform the following tasks:
This section covers how to export a CD-ROM file system from a remote system.
|
Caution The instructions for mounting a remotely exported CD-ROM drive on a local system are for like systems. For example, the instructions are for exporting a CD-ROM file system from an HP-UX system and mounting it on another HP-UX system for installation, or for exporting from a Solaris system and mounting on Solaris, but not for cross-platform operation. If necessary, your system administrator can help you with cross-platform exporting and mounting. |
To export a CD-ROM file system, perform the following steps on the remote system:
Step 2 Log in as the root user.
Step 3 If the /cdrom directory already exists, proceed to the next step. If the /cdrom directory does not exist, create it with the mkdir command:
Step 4 If an exports file does not exist, create one using a text editor.
Step 5 Edit the exports file to include this line:
Step 6 If you just created a new exports file (/etc/dfs/dfstab or /etc/exports) in Step 4, you must now enable your workstation as a Network File System (NFS) server. To start the nfsd server, enter the following commands:
Step 7 On Solaris only, add the following line to the etc/dfs/dfstab file:
Step 8 Mount the CD-ROM.
The vold server automatically manages the CD-ROM device and performs the mounting. The CD-ROM may automatically mount onto the /cdrom/cdrom0 directory. If you are running File Manager, a separate File Manager window displays the contents of the CD-ROM disk. If the /cdrom/cdrom0 directory is empty because the CD was not mounted, or if the File Manager did not open a window showing the contents of the CD-ROM disk, verify the vold server is running by entering the following sequence of commands:
If the system does not display anything, restart the server:
If the vold server is running but did not mount the CD, stop the vold server process and then restart it:
process_ID is the UNIX process ID of the vold server.
Use the following commands to mount the CD-ROM:
-o ro mounts the CD-ROM in read-only mode.
-t indicates the type of file system: hsfs for the ISO 9660 standard, or cdfs for the High Sierra standard with Rock Ridge extensions.
device_filename is the name of the device you want to mount (for example /dev/dsk/c201d2s0) or a different device name reported by the /etc/ioscan program for the CD-ROM device.
Step 9 If the /etc/exports file existed previously, enter the following command to run exportfs:
If /etc/exports did not exist previously, reboot your system.
Continue to the "Mounting a Remotely Exported CD-ROM File System on a Local HP or Solaris System" section.
To mount a file system that is exported from a remote system, perform the following steps on the local system:
Step 2 If a /cdrom directory does not already exist, create it by entering the mkdir command:
Step 3 To mount a file system that is exported from a remote system, use the mount command as shown below.
remote_hostname is the name of the remote workstation.
remote_filesystem is the name of the file system on the remote workstation.
local_mount_point is the name to be used on the local workstation.
For example, to mount the /cdrom file system from a remote host called faraway on a local directory named /cdrom, you would use the following command:
The remote CD-ROM is ready for software installation on the local system.
To prepare the system for software installation from a local CD-ROM drive, complete the following steps:
Step 2 Log in as the root user.
Step 3 If the /cdrom directory already exists, proceed to the next step.
If a /cdrom directory does not exist, create it with the mkdir command:
The vold server automatically manages the CD-ROM device and performs the mounting. The CD-ROM may automatically mount onto the /cdrom/cdrom0 directory. If you are running File Manager, a separate File Manager window displays the contents of the CD-ROM disk. If the /cdrom/cdrom0 directory is empty because the CD was not mounted, or if File Manager did not open a window displaying the contents of the CD-ROM disk, verify that the vold server is running by entering the following sequence of commands:
If the system does not display anything, restart the vold server using the following command:
If the vold server is running but did not mount the CD-ROM, stop and restart the vold server process:
process_ID is the UNIX process ID of the vold server.
-o ro mounts the CD-ROM in read-only mode.
-t indicates the type of file system: hsfs for the ISO 9660 standard, and cdfs for the High Sierra standard with Rock Ridge extensions.
device_filename is the name of the device you want to mount (for example /dev/dsk/c201d2s0) or a different device name reported by the /etc/ioscan program for the CD-ROM device.
You can install CiscoWorks Blue Maps from a CD-ROM drive attached to your system or from a drive connected to a remote system. You must first use SMIT to mount the local or remote device on the local AIX system.
|
Caution Avoid exposing the CiscoWorks Blue Maps CD-ROM to direct sunlight because it could harm the contents. |
To install Maps on AIX from a CD-ROM, you can do one of the following:
This section describes how to mount the CD-ROM drive from the local workstation. If you have already performed this procedure, or if another device is already mounted on the mount point, this process will fail.
If you are using SMIT from a remote workstation, be sure to export the DISPLAY variable to your workstation before starting SMIT. Otherwise, you will be using SMITTY.
To mount the CD-ROM on the file system from a local CD-ROM drive, use SMIT to perform the following steps:
Step 2 Log in as the root user.
Step 3 Enter the following smit command:
Step 4 From the System Management menu, click System Storage Management (Physical & Logical Storage).
Step 6 Select Add/Change/Show/Delete File Systems.
Step 7 Select CDROM File Systems.
Step 8 Select Add a CDROM File System.
Step 9 Click the "DEVICE name" List button and select the device name (such as /dev/cd0) from the list that appears.
Step 10 In the Mount point field, enter the name of a mount point directory (such as /cdrom).
Step 11 Click OK and read the output.
Step 12 Click Done.
Step 13 Terminate SMIT by selecting Exit SMIT from the Exit menu.
Step 14 Use the mountfs command to mount the file system:
Step 15 Click the "FILE SYSTEM name" List button, and select a device name (such as /dev/cd0) from the list that appears.
Step 16 In the "DIRECTORY field," enter the name of a mount point directory (such as /cdrom).
Step 17 Click the "TYPE of file system" List button, and select cdrfs as the file system type.
Step 18 Set the "Mount as Read-Only System" field to yes.
Step 19 Click OK and read the output, and then click Done.
Terminate SMIT by selecting Exit SMIT from the Exit menu.
This section covers how to mount a remote CD-ROM on your local workstation. Installation of CiscoWorks Blue Maps does not require any disk space on the remote system. The software is copied across the network to the local workstation.
To mount the CD-ROM on the local file system from a remote CD-ROM drive, first mount the CD-ROM on the remote system using the following procedure. If you have already performed this procedure, or if another device is already mounted on the mount point, this process will fail.
Step 2 Log in as the root user.
Step 3 To start SMIT, enter the smit command:
Step 4 On the System Management list, select System Storage Management (Physical & Logical Storage).
Step 5 Select File Systems.
Step 6 Select Add/Change/Show Delete File Systems.
Step 7 Select CDROM File Systems.
Step 8 Select Add a CDROM File System.
Step 9 Click the "DEVICE name" List button, and select the device name (such as /dev/cd0) from the list that appears.
Step 10 In the "Mount point field," enter the name of a mount point directory (such as /cdrom).
Step 11 Click OK and read the output.
Step 12 Click Done.
Step 13 Terminate SMIT by selecting Exit SMIT from the Exit menu.
Step 14 Use the mountfs command to mount the file system:
Step 15 Click the "FILE SYSTEM name" List button and select a device name (such as /dev/cd0) from the list that appears.
Step 16 In the "DIRECTORY field," enter the name of a mount point directory (such as /cdrom).
Step 17 Click the "TYPE of file system" LIST button and select cdrfs as the file system type.
Step 18 Set the "Mount as Read-Only System" field to yes.
Step 19 Click OK and read the output, and then click Done.
Step 20 Terminate SMIT by selecting Exit SMIT on the Exit menu.
Step 21 Enter the following command at the system prompt:
Step 22 In the "PATHNAME of directory to export" field, enter the path name (such as /cdrom).
Step 23 Use the arrow keys to change the "Mode to Export Directory" field to read-only.
Step 24 Enter the appropriate information, if necessary, into any of the other fields.
Step 25 Click OK, read the output, then click Done.
Step 26 Terminate SMIT by selecting Exit SMIT from the Exit menu.
Perform the following steps on the local system to mount the remote file system.
Step 2 In the "FILE SYSTEM name" field, enter the device name from the remote system (such as /cdrom).
Step 3 In the "DIRECTORY over which to mount" field, enter the name of the mount point directory (such as /cdrom).
Step 4 Click the "TYPE of file system" List button and select nfs as the file system type.
Step 5 In the "REMOTE NODE" field, enter the name of the remote host, such as host1.cisco.com.
Step 6 Set the "Mount as Read-Only System" field to yes.
Step 7 Click OK and read the output, and then click Done.
Step 8 Terminate SMIT by selecting Exit SMIT on the Exit menu.
The CD-ROM is ready for software installation.
Unmount the CD by logging in as the root user and entering the following commands at the local or remote workstation on which the CD-ROM is mounted:
The CD-ROM device is unmounted from the /cdrom directory. Remove the CD-ROM from the drive.
Posted: Tue Aug 5 15:54:07 PDT 2003
All contents are Copyright © 1992--2003 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.