|
|
Using the Maps Motif interface, you can activate and deactivate PUs from the PU List window and you can activate and deactivate LUs from the LU List window. But before you can activate or deactivate PUs or LUs, you must do the following:
The following sections describe how to enable and disable SNA activation and deactivation:
To enable SNA activation and deactivation, use the following procedure to create the $CWBROOT/etc/SnaActDeactOn file:
Step 1 Exit any Maps application by selecting File>Exit Program from the menu bar.
Step 2 Become the root user by entering the following command:
su root
Step 3 When prompted, enter the root user's password.
Step 4 Change to the $CWBROOT/etc directory by entering the following command:
cd /opt/CSCOcb/etc
Step 5 Create an SNA activation/deactivation file by entering the following command:
touch SnaActDeactOn
Step 6 Change back to your username by entering the following command:
exit
Step 7 Ensure that the mainframe SEC parameter card is set to NO in NSPPARM.
Step 8 Restart the application.
To disable SNA activation and deactivation, use the following procedure to remove the $CWBROOT/etc/SnaActDeactOn file:
Step 1 If you are already running a Maps application, exit the application by selecting File>Exit Program from the menu bar.
Step 2 Become the root user by entering the following command:
su root
Step 3 When prompted, enter the root user's password.
Step 4 Change from the current directory to the $CWBROOT/etc directory by entering the following command:
cd /opt/CSCOcb/etc
Step 5 Remove the SNA activation/deactivation file with the following command:
rm SnaActDeactOn
Step 6 Switch back to your username by entering the following command:
exit
Step 7 Restart the application.
Posted: Thu Sep 9 08:53:37 PDT 1999
Copyright 1989-1999©Cisco Systems Inc.