Index

Table Of Contents

A - C - D - F - I - L - M - N - P - R - S - T - U -

Index

A

accessing the DPE-590 or DPE-2115 1-1

accessing the Solaris DPE

from a local host 1-2

from a remote host 1-2

accessing the system from the console mode 3-7

C

CLI commands

DPE system commands 2-1

use on hardware and Solaris DPEs 1-2

CLI help 2-6

full help function 2-6

partial help function 2-6

CLI See also

command line interface 1-1, 2-1, 3-1, 4-1, 5-1, 6-1, 7-1

D

default DPE password 1-1

device provisioning engine

accessing the DPE CLI 1-1

accessing the hardware CLI 1-1

accessing the Solaris DPE from a local host 1-2

accessing the Solaris DPE from a remote host 1-2

DPE-2115 1-1

DPE-590 1-1

hardware DPE 1-1

managing and monitoring the system 2-1

Solaris DPE 1-1

system commands 2-1

Documentation x

conventions x

related documents x

downloading support bundles

support daemon ftp enabled command 3-6

DPE configuration commands x

clearing configured primary provisioning groups (no dpe provisioning-group primary command) 4-6

clearing secondary DPE provisioning groups (dpe provisioning-group secondary command) 4-8

connecting an RDU to a DPE

dpe rdu-server (FQDN) command 4-8

dpe rdu-server (IP) command 4-9

erasing the DPE cache (clear cache command) 4-3

identifying the DPE process (show dpe command) 4-15

restarting the DPE (dpe reload command) 4-9

setting DPE port number (dpe port command) 4-5

setting the primary provisioning-group (dpe provisioning-group primary command) 4-6

setting the secondary provisioning-group (dpe provisioning-group secondary command) 4-7

setting the shared-secret (dpe shared secret command) 4-10

showing the DPE settings (show dpe config) 4-16

starting the DPE (start command) 4-10

stopping the DPE (dpe stop command) 4-11

upgrading the DPE (upgrade command) 2-26

DPE See also

device provisioning engine ix

F

file transfer protocol

bundling the current DPE state (support bundle state command) 3-6

enabling/disabling FTP on a hardware DPE (support daemon ftp enabled command) 3-6

identifying all available outgoing bundles (show bundles command) 3-4

FTP See also

file transfer protocol 3-5

full CLI help function 2-6

I

interface commands

displaying Ethernet statistics for Solaris DPEs (show interface ethernet stats command) 2-20

L

log system management commands x

clearing syslog settings (no syslog log-server command) 5-16

configuring the log-server (syslog log-server command) 5-15

disabling debug (no debug command) 5-11

disabling debug cache logging (no debug dpe cache command) 5-3

disabling dpe connection debugging (no debug dpe connection command) 5-4

disabling dpe dpe-server debugging (no debug dpe dpe-server command) 5-5

disabling dpe event manager debugging (no debug dpe event-manager command) 5-6

disabling dpe exception debugging (no debug dpe exception command) 5-7

disabling dpe framework debugging (no debug dpe framework command) 5-8

disabling dpe message debugging (no debug dpe messaging command) 5-9

displaying the running DPE log (show log run command) 5-13

enabling cache debug logging (debug dpe cache command) 5-3

enabling debug (debug on command) 5-11

enabling dpe connection debugging (debug dpe connection command) 5-4

enabling dpe event-manager debugging (debug dpe event manager command) 5-6

enabling dpe framework debugging (debug dpe framework command) 5-8

enabling dpe message debugging (debug dpe messaging command) 5-9

enabling dpe-server debugging (debug dpe dpe-server command) 5-5

enabling dpe tftp debugging (debug dpe tftp command) 5-10

enabling dpe tftp debugging (no debug dpe tftp command) 5-10

enabling exception debugging (debug dpe exceptions command) 5-7

logging syslog messages (syslog mode command) 5-16, 5-17

showing all recent DPE syslog entries (show syslog command) 5-14

showing a number of recent log entries (show log last command) 5-13

showing a running syslog (show syslog run command) 5-15

showing recent DPE syslog entries (show syslog last command) 5-14

showing recent log entries (show log command) 5-12

M

monitor system commands

showing disk use (show disk command) 2-17

showing memory use (show memory command) 2-21

showing the CPU (show cpu command) 2-16

N

network and system configuration commands

changing the system password (password command) 2-13

clearing the default gateway (no ip default-gateway command) 2-8

clearing the IP domain name (no ip domain-name command) 2-9

clearing the IP name server (ip name-server command) 2-10

clearing the IP route (no ip route command) 2-11

configuring the default gateway (ip default-gateway command) 2-8

configuring the IP name server (ip name-server command) 2-10

configuring the IP route (ip route command) 2-11

enabling the ethernet IP interface (interface ethernet 0...1 ip enabled command) 2-7

enabling the password (enable password command) 2-3

enabling the provisioning interface (interface ethernet 0...1 provisioning enabled command) 4-11

setting the clock (clock set command) 2-2

setting the ethernet interface (interface ethernet 0...1 ip address command) 2-7, 4-12

setting the hostname (hostname command) 2-6

showing current data and time (show clock command) 2-15

showing Ethernet statistics for hardware DPEs (show interface ethernet stats command) 2-19

showing IP settings (show ip command) 2-21

showing the hostname (show hostname command) 2-18

showing the interface ethernet configuration (show interface ethernet config command) 2-18

showing the IP routing table (show ip route command) 2-20

P

PacketCable voice technology commands x

creating and setting a security key (packetcable registration kdc-service-key command) 6-7

disabling debugging of PacketCable secure registration (no debug dpe registration command) 6-4

disabling debugging PacketCable registration detail categories (no debug dpe registration - detail command) 6-4

disabling detailed SNMP debugging (no debug dpe netsnmp command) 6-2

disabling detailed SNMP debugging (no debug dpe snmp command) 6-5

disabling MTA configuration file encryption detailed debugging (no packetcable registration encryption command) 6-7

disabling PacketCable (no packetcable command) 6-6

displaying part of the SNMP log file (show packetcable snmp log last command) 6-11

displaying recent log files and all new log messages (show packetcable snmp log run command) 6-11

displaying recent PacketCable SNMP log entries (show packetcable snmp log command) 6-10

enabling debugging PacketCable registration detail categories (debug dpe registration - detail command) 6-3

enabling debugging PacketCable secure registration (debug dpe registration command) 6-3

enabling detailed debugging (debug dpe netsnmp command) 6-2

enabling detailed SNMP debugging (debug dpe snmp command) 6-5

enabling MTA configuration file encryption (packetcable registration encryption command) 6-7

enabling PacketCable (packetcable enable command) 6-6

generating a security key (packetcable snmp key-material command) 6-9

setting SNMP privacy policy (packetcable registration policy-privacy command) 6-8

setting SNMP timeout (packetcable snmp timeout command) 6-10

turning off SNMPv3 cloning support (no packetcable snmp key-material command) 6-9

partial CLI help function 2-6

port 2323 1-1

R

related documentation x

S

show commands

determining available disk space (show disk command) 2-17

displaying al available DPE commands (show commands command) 2-16

displaying available memory (show memory command) 2-21

displaying Ethernet interface configurations for hardware DPEs (show interface ethernet config command) 2-18

displaying Ethernet interface configurations for Solaris DPEs (show interface ethernet config command) 2-19

displaying Ethernet interface statistics for hardware DPEs (show interface ethernet stats command) 2-19

displaying Ethernet statistics for Solaris DPEs (show interface ethernet stats command) 2-20

displaying IP settings (show ip command) 2-21

displaying part of the SNMP log file (show packetcable snmp log last command) 6-11

displaying recent log files and all new log messages (show packetcable snmp log run command) 6-11

displaying recent PacketCable SNMP log entries (show packetcable snmp log command) 6-10

displaying the DPE host name (show hostname command) 2-18

displaying the system date and time (show clock command) 2-15

identifying all available outgoing bundles (show bundles command) 3-4

identifying files stored in DPE cache (show tftp files commands) 2-22

identifying running software on the DPE (show version command) 2-23

showing CPU use (show cpu command) 2-16

showing the IP routing table (show ip route command) 2-20

SNMP agent commands x

changing the SNMP listening UDP port (no snmp-server udp-port command) 7-9

identifying a DPE location (snmp-server location command) 7-6

identifying a system contact (snmp-server contact command) 7-5

identifying the SNMP listening UDP port (snmp-server udp-port command) 7-8

reloading the SNMP agent process (snmp-server reload command) 7-4

removing a DPE location (no snmp-server location command) 7-7

removing a host (no snmp-server host command) 7-3

removing a system contact (no snmp-server contact command) 7-6

removing the public community (no snmp-server community command) 7-2

setting up a community access string (snmp-server community command) 7-2

specifying a host (snmp-server host command) 7-3

specifying SNMP inform notifications (snmp-server inform command) 7-7

specifying SNMP trap notifications (no snmp-server inform command) 7-8

starting the SNMP agent process (snmp-server start command) 7-4

stopping the SNMP agent process (snmp-server stop command) 7-5

SNMP inform

retries 7-7

Solaris DPE specific CLI commands

snmp-server udp-port command 7-8

starting and stopping the CLI 1-1

support and troubleshooting commands x

bundling DPE cache (support bundle cache command) 3-5

bundling the DPE (support bundle state command) 3-6

clearing archive bundles (clear bundles command) 3-1

enabling/disabling hardware DPE FTP services (support daemon ftp enabled command) 3-6

enabling/disabling hardware DPE Telnet services (support daemon telnet enabled command) 3-7

finding an IP address (host (IP) command) 3-2

identifying all available outgoing bundles (show bundles command) 3-4

identifying the host IP route (traceroute (IP) command) 3-8

identifying the host route (traceroute (domain) command) 3-8

pinging (ping command) 3-3

pinging an IP address (ping (IP) command) 3-4

system commands ix

disabling (disable command) 2-3

enabling (enable command) 2-4

exiting (exit command) 2-5

helping (help command) 2-5

powering off (poweroff command) 2-14

reloading (reload command) 2-15

showing all available DPE commands (show commands command)) 2-16

showing configurations (show running config) 2-22

showing system operating time (uptime command) 2-27

T

telnet connection

port 2323 1-1

Solaris DPE 1-2

support daemon telnet enabled command 3-7

terminology x

traps

snmp-server inform CLI command 7-7

U

uploading upgrade bundles

support daemon ftp enabled command 3-6