|
Table Of Contents
PacketCable DHCP Options to BACC Properties Mapping
Option 122 and BACC Property Comparison
Option 177 and BACC Property Comparison
PacketCable DHCP Options to BACC Properties Mapping
This appendix identifies the mapping of BACC properties to the PacketCable DHCP options used for PacketCable provisioning.
The minimum required set of these properties is configured, during installation, in the <BACC_HOME>/cnr_ep/conf/cnr_ep.properties file. This file is located on the Network Registrar host. The set of properties defined in cnr_ep.properties is applied to all PacketCable voice technology devices in the provisioning group. Like other BACC properties, you can also set these properties on a device or a class of service. Setting them at the RDU, using either the administrator's user interface or the API, overrides the corresponding values set in the cnr_ep.properties file.
Note See "Using the changeNRProperties.sh Tool" section on page 12-43 for information on changing key these configuration properties.
BACC supports both PacketCable DHCP option 122 (as specified in RFC 3495 and 3594) and the deprecated PacketCable DHCP option 177. BACC does not ignore DHCP requests when it cannot populate option 122 and/or 177 content. Whatever option 122/177 content is available is populated and the decision to ignore the option is left to the EMTA.
When BACC receives a DHCP request asking for both option 122 and 177, BACC will ignore the request for option 177 and populate only option 122 content.
Caution There should be only one instance of each property in <BACC_HOME>/cnr_ep/conf/cnr_ep.properties.
Option 122 and BACC Property Comparison
Table B-1 identifies the BACC properties, as they apply to the definition of option 122 in RFC-3495 and RFC-3594.
Caution If any of /ccc/kerb/auth/backoff/nomTimeout, /ccc/kerb/auth/backoff/maxTimeout, or /ccc/kerb/auth/backoff/maxRetries are defined, they must all be defined. Similarly, if any of /ccc/kerb/app/backoff/nomTimeout, /ccc/kerb/app/backoff/maxTimeout, or /ccc/kerb/app/backoff/maxRetries are defined, they must all be defined.
Option 177 and BACC Property Comparison
In accordance with PacketCable compliance wave 26, option 177 is deprecated, and option 122 is now the preferred MTA provisioning option. For legacy devices that still support option 177, Table B-2 identifies the BACC properties, as they apply to the definition of option 177
Posted: Thu Feb 2 12:54:05 PST 2006
All contents are Copyright © 1992--2006 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.