|
|
This appendix identifies the mapping of BAC properties to the PacketCable DHCP options used for PacketCable provisioning.
The minimum required set of these properties is configured, during installation, in the <BPR_HOME>/cnr_ep/conf/cnr_ep.properties file. This file is located on the Network Registrar host. The set of properties defined in cnr_ep.properties is applied to all PacketCable voice technology devices in the provisioning group. Like other BAC properties, you can also set these properties on a device or a class of service. Setting them at the RDU, using either the administrator's user interface or the API, overrides the corresponding values set in the cnr_ep.properties file.
 |
Note The officially assigned DHCP option number 122 as defined in RFC-3495 is not supported in BAC 2.5; mapping is provided here for reference only. |
 |
Caution There should only be one instance of each property in <BPR_HOME>/cnr_ep/conf/cnr_ep.properties. |
Table E-1 DHCP option to BAC Property Comparison
|
Posted: Tue Nov 25 06:38:36 PST 2003
All contents are Copyright © 1992--2003 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.