|
|
The Cisco Broadband Access Center Installation and Configuration Guide (BAC) for Broadband Aggregation provides information about the Cisco Broadband Access Center product. This guide explains the product architecture and components and the system requirements that must be taken into consideration prior to installing the product. This guide also describes how to install, configure, start, launch, stop, and remove the BAC software product.
Prior to reading this guide, you should read the Cisco Broadband Access Center Release Notes document. The release notes document provides information about system requirements (hardware and software), product features, known software and documentation problems, and any last minute information about the BAC software not available when this guide went to press.
This guide is intended primarily for system integrators, customers, related ISVs, and application developers who need to provision subscriber customer premises equipment (CPEs) and integrated access devices (IADs), aggregation and routing devices, and network resources. You should have a basic understanding of network design, operation, and terminology, as well as familiarity with your own network configurations. You also must have a basic familiarity with UNIX and Sun Microsystem's Solaris Operating System.
This guide is organized as follows:
"Overview and System Requirements," provides information about the product architecture and components.
"Pre-installation Tasks," provides information about the system requirements that must be taken into consideration prior to installing the Cisco Broadband Access Center software.
"Installing the Cisco Broadband Access Center Software," provides information about installing the BAC software.
"Configuring the Cisco Broadband Access Center Software," provides information about configuring the BAC software.
"Managing the Cisco Broadband Access Center System," provides information about how to start, launch, stop, and uninstall the BAC software.
"Cisco CNS Configuration Engine," provides information about the tasks you must perform in order to use the optional Cisco Configuration Engine features in conjunction with BAC.
"Troubleshooting," provides installation troubleshooting information.
"Cisco Networking Services Components,"provides installation information for components that integrate with Cisco Broadband Access Center product.
The following documents are companion documents to this document and comprise the BAC documentation set:
Cisco provides several ways to obtain documentation, technical assistance, and other technical resources. These sections explain how to obtain technical information from Cisco Systems.
You can access the most current Cisco documentation on the World Wide Web at this URL:
http://www.cisco.com/univercd/home/home.htm
You can access the Cisco website at this URL:
International Cisco websites can be accessed from this URL:
http://www.cisco.com/public/countries_languages.shtml
Cisco documentation and additional literature are available in a Cisco Documentation CD-ROM package, which may have shipped with your product. The Documentation CD-ROM is updated regularly and may be more current than printed documentation. The CD-ROM package is available as a single unit or through an annual or quarterly subscription.
Registered Cisco.com users can order a single Documentation CD-ROM (product number DOC-CONDOCCD=) through the Cisco Ordering tool:
http://www.cisco.com/en/US/partner/ordering/ordering_place_order_ordering_tool_launch.html
All users can order monthly or quarterly subscriptions through the online Subscription Store:
http://www.cisco.com/go/subscription
You can find instructions for ordering documentation at this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm
You can order Cisco documentation in these ways:
http://www.cisco.com/en/US/partner/ordering/index.shtml
You can submit comments electronically on Cisco.com. On the Cisco Documentation home page, click Feedback at the top of the page.
You can e-mail your comments to bug-doc@cisco.com.
You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address:
Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883
Cisco provides Cisco.com, which includes the Cisco Technical Assistance Center (TAC) website, as a starting point for all technical assistance. Customers and partners can obtain online documentation, troubleshooting tips, and sample configurations from the Cisco TAC website. Cisco.com registered users have complete access to the technical support resources on the Cisco TAC website, including TAC tools and utilities.
Cisco.com offers a suite of interactive, networked services that let you access Cisco information, networking solutions, services, programs, and resources at any time, from anywhere in the world.
Cisco.com provides a broad range of features and services to help you with these tasks:
To obtain customized information and service, you can self-register on Cisco.com at this URL:
http://tools.cisco.com/RPF/register/register.do
The Cisco TAC is available to all customers who need technical assistance with a Cisco product, technology, or solution. Two types of support are available: the Cisco TAC website and the Cisco TAC Escalation Center. The type of support that you choose depends on the priority of the problem and the conditions stated in service contracts, when applicable.
We categorize Cisco TAC inquiries according to urgency:
The Cisco TAC website provides online documents and tools to help troubleshoot and resolve technical issues with Cisco products and technologies. To access the Cisco TAC website, go to this URL:
All customers, partners, and resellers who have a valid Cisco service contract have complete access to the technical support resources on the Cisco TAC website. Some services on the Cisco TAC website require a Cisco.com login ID and password. If you have a valid service contract but do not have a login ID or password, go to this URL to register:
http://tools.cisco.com/RPF/register/register.do
If you are a Cisco.com registered user, and you cannot resolve your technical issues by using the Cisco TAC website, you can open a case online at this URL:
http://www.cisco.com/tac/caseopen
If you have Internet access, we recommend that you open P3 and P4 cases online so that you can fully describe the situation and attach any necessary files.
The Cisco TAC Escalation Center addresses priority level 1 or priority level 2 issues. These classifications are assigned when severe network degradation significantly impacts business operations. When you contact the TAC Escalation Center with a P1 or P2 problem, a Cisco TAC engineer automatically opens a case.
To obtain a directory of toll-free Cisco TAC telephone numbers for your country, go to this URL:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
Before calling, please check with your network operations center to determine the Cisco support services to which your company is entitled: for example, SMARTnet, SMARTnet Onsite, or Network Supported Accounts (NSA). When you call the center, please have available your service agreement number and your product serial number.
Information about Cisco products, technologies, and network solutions is available from various online and printed sources.
http://www.cisco.com/en/US/products/products_catalog_links_launch.html
http://www.cisco.com/go/packet
http://www.cisco.com/go/iqmagazine
http://www.cisco.com/en/US/about/ac123/ac147/about_cisco_the_internet_protocol_journal.html
http://www.cisco.com/en/US/learning/le31/learning_recommended_training_list.html
Posted: Thu May 22 17:26:01 PDT 2003
All contents are Copyright © 1992--2003 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.