Table Of Contents
Supported Service Alarms
Supported Service Alarms
Table 124 lists the supported service alarms in ANA 4.0.
Table 124 Supported Service Alarms
Technologies
|
Alarm Name
|
Supported
|
Internet Protocol
|
LSP Removed
|
No
|
Tunnel GRE Problem
|
No
|
Routing Protocols [BGP/OSPF/ISIS]
|
BGP Neighbor Loss
|
Yes
|
Ethernet [IEEE 802™.3]
|
Interface Status
|
Yes
|
Link Down / Port Down / Port Flapping
|
Yes
|
Discarded Packets
|
No
|
Dropped Packets
|
No
|
Tx Utilization
|
No
|
Rx Utilization
|
No
|
Multi Protocol Label Switching [MPLS]
|
Broken LSP Discovered
|
No
|
MPLS Black Hole Found
|
No
|
MPLS TE Tunnel Down
|
No
|
MPLS TE Tunnel Flapping
|
No
|
Layer 2 Tunnel Down
|
No
|
Physical and Logical Equipment
|
Card Out
|
No
|
Investigation State
|
No
|
Component Unreachable
|
Yes
|
Base Logical Component
|
Memory Utilization
|
Yes
|
CPU Utilization
|
Yes
|
See Cisco Active Network Abstraction 4.0 User and Administration Guide for information on tracking faults. This document is available on Cisco.com at:
http://www.cisco.com/en/US/products/ps6776/tsd_products_support_series_home.html