cc/td/doc/product/rtrmgmt/ade/ade3040
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table Of Contents

Release Notes for Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance

Contents

Introduction

New and Changed Information

New Features in the Cisco ADE 2130 and 2140 Series Appliance

Limitations, Restrictions, and Important Notes

Related Documentation


Release Notes for Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance


December 18, 2007

OL-14302-01

These release notes are for the Cisco Application Deployment Engine (ADE) 2130 and 2140 Series appliance. These release notes are updated as needed to describe new features, memory requirements, hardware support, software platform deferrals, and related documents.

The latest version of the release notes for the Cisco ADE 2130 and 2140 Series appliance can be found at the following URL:

http://www.cisco.com/en/US/products/ps8340/tsd_products_support_series_home.html

Contents

This document contains the following sections:

Introduction

New and Changed Information

Limitations, Restrictions, and Important Notes

Related Documentation

Related Documentation

Obtaining Documentation and Submitting a Service Request

Introduction

The Cisco ADE 2130 and 2140 Series appliance is configured for either AC-input or DC-input power, mounted in a standard 19-inch (48.3 cm) 2- or 4-post equipment rack (using the rack-mount brackets provided), and includes the following features:

Microprocessor:

Cisco ADE 2130 Series appliance—Intel Xeon 1.86-GHz processor with a 1066-MHz front side bus (FSB) and 8 MB of Layer 2 cache

Cisco ADE 2140 Series appliance—Dual Intel Xeon 1.86-GHz processor with a 1066-MHz front side bus (FSB) and 8 MB of Layer 2 cache

Eight synchronous dynamic RAM (SDRAM) slots support up to 8 GB (2 GB factory installed)

Support for up to 6 x 147-GB SAS hard drives (1 x 147-GB SAS hard drive factory installed)

Integrated RAID at levels 0, 1, 5, 1+0, and 5+0

Two fixed RJ-45 10BASE-T/100BASE-TX/1000BASE-T network interface connectors (located on the rear panel)

Two optional RJ-45 10BASE-T/100BASE-TX/1000BASE-T network interface connectors using a mezzanine module (located on the rear panel)

One optional DVD-ROM drive (located on the front panel)

Two RJ-45 serial (console) ports (one located on the front panel and one located on the rear panel)

Single or redundant (optional) AC or DC power supply

Front-to-rear airflow blowers using two 40 x 40 x 56-mm exhaust fans and ducting for the CPU and memory, and two 40-mm exhaust fans built in to the power supply

Expansion slot support (located on the rear panel):

Two PCIe, low profile

Three PCI-X full height

Three USB 2.0 ports (one located on the front panel, USB 2; two located on the rear panel, USB 0 and USB 1)

One PS/2 (keyboard) port (located on the rear panel)1

One PS/2 (mouse) port (located on the rear panel)1

One DB-15 serial (video) port (located on the rear panel)

Rear access cabling

Five front-panel appliance LEDs:

NIC activity (indicates whether interrupts or packet transfers are running)

Power (indicates whether the power supply is operational)

Hard disk drive activity (indicates whether the drive is functioning properly)

Appliance status

Appliance identification

The Cisco ADE 2130 and 2140 Series appliance is normally shipped with:

Rack-mount kit includes either brackets or rails allowing the Cisco ADE 2130 and 2140 Series appliance to be positioned in a 2- or 4-post equipment rack.

New and Changed Information

The following sections list the new hardware and software features supported by the Cisco ADE 2130 and 2140 Series appliance.

New Features in the Cisco ADE 2130 and 2140 Series Appliance

There are no new features supported by the Cisco ADE 2130 and 2140 Series appliance.

Limitations, Restrictions, and Important Notes

The Cisco ADE 2130 and 2140 Series appliance ships with a software package with a customized operating system tailored to the ADE 2130 and 2140 Series appliance. Customer-provided software and operating systems are not supported on these platforms.

Related Documentation

Use this document with the following guides:

Cisco ADE Documents

Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance Hardware Installation Guide

Regulatory Compliance and Safety Information for the Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.

1 Either PS/2 port can support the mouse or keyboard. Neither port supports hot-plugging.

hometocprevnextglossaryfeedbacksearchhelp

Posted: Tue Dec 18 12:54:49 PST 2007
All contents are Copyright © 1992--2007 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.