cc/td/doc/product/rtrmgmt/7000/v2_0
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Accounting and Inventory
Chassis Inventory
Module Inventory

Accounting and Inventory


Accounting data provides inventory information on both the chassis and module object levels. Inventory windows allow you to quickly determine the details regarding the selected object, as well as details of the system the object is part of.

The Accounting chapter contains the following information:

Chassis Inventory

The Chassis Inventory window displays general inventory information, it is a read-only window (you cannot configure any fields in this window).

To view the Chassis Inventory window, proceed as follows:


Step 1   Right-click (on a relevant object icon in the Map Viewer window or from an object pick list) and choose Cisco 7000 Series Manager > Accounting > (Chassis >) Inventory. Refer to "EM Windows" for information on which objects allow you to launch the Chassis Inventory window.

The Chassis Inventory window appears displaying the General tab.


Figure 8-1   Chassis Inventory Window—General Tab


Step 2   Select the Chassis for which you want to view inventory data from the Chassis list box at left of the window.

Inventory data for the chassis selected displays. Information in the Chassis Details area displays the following:

The System Details area displays the following:

The Version Details area displays the following:

The PCMCIA Details area displays the card types present in slot 0 and slot 1, typically flash. If either slot is empty, that information displays. The Cisco 7000 Series Manager currently does not support the PCMCIA Details area.

The Power Supply Details area displays the power supply types present in the chassis. If PS1 or PS2 is not present, that information also displays. The Cisco 7000 Series Manager currently does not support the Power Supply Details area.

Step 3   Choose File > Close to close the Chassis Inventory window.



Module Inventory

The Module Inventory window displays general inventory information, it is a read-only window (you cannot configure any fields in this window).

To view the Module Inventory window for a selected module, proceed as follows:


Step 1   Right-click (on a relevant object icon in the Map Viewer window or from an object pick list) and choose Cisco 7000 Series Manager > Accounting > (Module >) Inventory. Refer to "EM Windows" for information on which objects allow you to launch the Module Inventory window.

The Module Inventory window appears displaying the General tab.


Figure 8-2   Module Inventory Window


Step 2   Select a chassis from the Chassis list box at left of the window, then select a module from the Module list box.

Inventory data for the module selected displays. Information in the Module Details area displays the following:

The System Details area displays the following:

The Version Details area displays the following:

The Slot and Ports area displays the following:

Step 3   Choose File > Close to close the Module Inventory window.




hometocprevnextglossaryfeedbacksearchhelp
Posted: Thu Jun 26 15:12:47 PDT 2003
All contents are Copyright © 1992--2003 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.