|
Table Of Contents
DISC Commands
This chapter provides DISC (disconnect) commands for the Cisco ONS 15454, ONS 15327 and ONS 15600.
9.1 DISC-TACC
Disconnect Test Access
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600
This command disconnects the TAP and puts the connection back to its original state (no splits). For more information on TACC, refer to the Cisco ONS SONET TL1 Reference Guide.
For this command to be applicable, you must first create the TAP using the ED-<MOD_PATH> command.
Note If you send this command to an already disconnected TAP connection, an SADC error message is returned.
Note If the system cannot release TAP, an SRTN error message is returned.
CategoryTroubleshooting and Test Access
SecurityMaintenance
Related Commands
CHG-ACCMD-<MOD_TACC>
CONN-TACC-<MOD_TACC>
EX-SW-<OCN_BLSR>
OPR-LPBK-<MOD2>
RLS-LPBK-<MOD2>
RTRV-PTHTRC-<PATH>
RTRV-TACC
Input FormatDISC-TACC:[<TID>]:<TAP>:<CTAG>;
Input ExampleDISC-TACC:CISCO:8:123;
Input Parameters
Posted: Mon Sep 3 11:08:11 PDT 2007
All contents are Copyright © 1992--2007 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.