|
Table Of Contents
CANC Commands
This chapter provides CANC (cancel) commands for the Cisco ONS 15454, ONS 15327, ONS 15600 and ONS 15310-CL.
4.1 CANC
Cancel
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
Reports the occurrence of a session timeout event.
CANC is an autonomous message transmitted by the NE to a user when a session established by that user is terminated because no messages were exchanged for a long period of time (a timeout). There is a default timeout period based on the user's privilege/security level. Starting with Release 4.0, timeouts can be provisioned through CTC. Starting with Release 4.6, timeouts can be provisioned through TL1 with the SET-ATTR-SECUDFLT command. The default timeouts based on privilege/security level are:
•A Superuser [SUPER] has a timeout period of 15 minutes.
•A Provisioning [PROV] user has a timeout period of 30 minutes.
•A Maintenance [MAINT] level user has a timeout period of 60 minutes.
•A Retrieve [RTRV] user has no timeout period.
When a timeout occurs, the corresponding port drops the session and the next session initiation at that port requires the regular login procedure.
The CANC message is only used to indicate that a session has been terminated because of a timeout. If a session is terminated for a different reason (for example, forced logout, loss of communication), the REPT EVT SESSION message is used.
CategorySecurity
SecurityRetrieve
Related Commands
Output FormatSID DATE TIME
A ATAG CANC
"<UID>"
;Output ExampleTID-000 1998-06-20 14:30:00
A 100.100 CANC
"CISCO15"
;Output Parameters
4.2 CANC-USER
Cancel User
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
This command logs a user out of an active session with the NE.
Note The USERID field of this command is a mandatory field.
For the CANC-USER command: CANC-USER:[TID]:[STRING]:CTAG
the syntax of the userid (first [STRING]) is not checked. Invalid syntax for the userid is permitted and the userid must not exceed 10 characters.
CategorySecurity
SecurityRetrieve
Related Commands
Input FormatCANC-USER:[<TID>]:<USERID>:<CTAG>;
Input ExampleCANC-USER:PETALUMA:TERRI:101;
Input Parameters
Table 4-2 CANC-USER Input Parameters
Parameter and Values DescriptionUSERID
Identifies the user to the system. USERID can be up to 10 alphanumeric characters. String
4.3 CANC-USER-SECU
Cancel User Security
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
This command forces a user off of the NE.
The UID specified can be a single userid or a list of userids separated by "&". The keyword ALL is not permitted. The UID specified cannot be the userid of the administrator issuing the command.
Note This command will log out ALL sessions on the NE (TL1 and CTC) of a user whose userid matches the UID specified in the command.
CategorySecurity
SecuritySuperuser
Related Commands
Input FormatCANC-USER-SECU:[<TID>]:<UID>:<CTAG>;
Input ExampleCANC-USER-SECU:PETALUMA:CISCO10:100;
Input Parameters
Posted: Mon Sep 3 11:05:48 PDT 2007
All contents are Copyright © 1992--2007 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.