|
Table Of Contents
ACT Commands
This chapter provides ACT (activate) commands for the Cisco ONS 15454, ONS 15327, ONS 15600 and ONS 15310-CL.
1.1 ACT-USER
Activate User
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
This command opens a session with the Network Element (NE).
Note•Passwords are masked for the following security commands: ACT-USER, COPY-RFILE, COPY-IOSCFG, ED-PID, ENT-USER-SECU and ED-USER-SECU. Access to a TL1 session through any means will have the password masked. The CTC Request History and Message Log will also show the masked commands. When a password-masked command is re-issued by double-clicking the command from CTC Request History, the password will still be masked in the CTC Request History and Message Log. The actual password that was previously issued will be sent to the NE. To use a former command as a template only, single-click the command in CTC Request History. The command will be placed in the Command Request text box, where you can edit the appropriate fields prior to reissuing it.
•This command is backwards compatible with userids and passwords from ONS 15454 2.x software versions according to the following rules:
ACT-USER:[TID]:[STRING]:CTAG::[STRING]
–The syntax of the userid (first [STRING]) and the password (second [STRING]) are not checked.
–Invalid syntax for both the userid and password is permitted, but the user can only log in if the userid/password match what is in the database.
–The userid and password cannot exceed 10 characters.
•For the ACT-USER command, it is required that no error code be transmitted except to convey that the login is granted or denied. Per TR-835, Appendix A, Section A.2:
"... the error codes corresponding to ACT ... do not apply to the ACT-USER command because this command requires that no error code be provided to the session request except to indicate that it has been denied. Before a session is established, a specific error code might reveal clues to an intruder attempting unauthorized entry."
•Starting with Release 4.6, the following feature can be turned on or off and the default is off: A new user must change his or her password after establishing a session for the first time before continuing. All TL1 commands except for ED-PID and CANC-USER will be denied until the password is changed. Once the password has been changed, a user can execute any command that his security level allows. If the user logs out without changing his password, each following session will DENY all commands, except ED-PID and CANC-USER, until the password is changed.
CategorySecurity
SecurityN/A
Related Commands
Input FormatACT-USER:[<TID>]:<UID>:<CTAG>[::<PID>];
Input ExampleACT-USER:PETALUMA:TERRI:100::MYPASSWD;
Input Parameters
Output FormatSID DATE TIME
M CTAG COMPLD
"<UID>:<LASTLOGINTIME>,<UNSUCCESSFULLOGINS>"
;Output ExampleTID-000 1998-06-20 14:30:00
M 001 COMPLD
"TERRI:2003-01-02 14-04-49,0"
;Output Parameters
Posted: Mon Sep 3 11:01:16 PDT 2007
All contents are Copyright © 1992--2007 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.