Table Of Contents
Pre-Installation Procedures
3.1 Shipment Verification
3.1.1 ONS 15305 Shipping Container Label
3.1.2 Preliminary Inventory Check
3.1.3 Reporting Damage
3.2 Site Preparation
3.3 Unpacking
Pre-Installation Procedures
This chapter provides pre-installation procedures for the Cisco ONS 15305. Chapter topics include shipment verification, site preparation, and equipment unpacking.
3.1 Shipment Verification
When you receive ONS 15305 system equipment at the installation site, immediately verify that the shipment is correct.
Note 
Cisco does not recommend shipping equipment that is mounted in racks. To ship equipment from one site to another, pack the equipment in the original box.
Note If you store the ONS 15305 before installing it, keep the ONS 15305 system equipment in the original shipping containers. The storage period should not exceed 12 months. Store the packed equipment indoors in a well-ventilated and static-safe environment.
3.1.1 ONS 15305 Shipping Container Label
The ONS 15305 shipping container label provides specific information about the shipped item. The label displays information in alphanumeric bar code format. Figure 3-1 shows a sample of a shipping container label.
Figure 3-1 Example of a Shipping Container Label
3.1.2 Preliminary Inventory Check
Compare the packing list information with the alphanumeric information provided on the shipping labels. The packing list and shipping labels should contain the same information. If there are any discrepancies between the shipping label information and the packing list information, call the Cisco Technical Assistance Center (TAC).
Log into http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml to obtain a directory of Cisco Technical Support toll-free numbers for your country.
3.1.3 Reporting Damage
To report damage to shipped articles, contact the Cisco Technical Assistance Center (TAC) to open a Return Material Authorization and Fault Symptom Report (RMA).
Log into http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml to obtain a directory of Cisco Technical Support toll-free numbers for your country. .
3.2 Site Preparation
Verify that the installation site meets the following criteria:
1. The site conforms to all environmental specifications in the Chapter 2, "Product Overview."
2. The floor or mounting area where you will install the equipment can support the equipment.
Caution Maximum recommended ambient is 45°C, minimimun -5°C.
The following tables are based on typical ONS 15305configurations. Floor loading, power consumption, heat dissipation, and clearances may vary in specific customer configurations.
3. The installation site meets the power supply requirements of the ONS 15305 equipment. Table 3-1 lists these requirements.
Table 3-1 Power Supply Requirements by ONS 15305 Equipment Type
Equipment Type
|
Power Supply Requirements
|
-48 V DC
|
-40.5 to -60 V DC
|
4. The installation site meets the power consumption requirements of the ONS 15305 equipment. Table 3-2 lists these requirements.
Table 3-2 Power Consumption Requirements by ONS 15305 Equipment Type
Equipment Type
|
Power Consumption Requirements
|
ONS 15305
|
maximum 120 W
|
5. The installation site meets the circuit breakers requirements of the ONS 15305 equipment. Table 3-3 lists these requirements.
Table 3-3 Circuit Breakers Requirements by ONS 15305 Equipment Type
Equipment Type
|
Circuit Breakers Requirements
|
ONS 15305
|
7 A (FAST)
|
6. Minimum recommended clearance is provided for accessing bays from the front and back, opening front covers, and clearing the top of the racks. Table 3-4 provides clearance requirements.
Table 3-4 Recommended Access Clearance
Item
|
Recommended Clearance
|
Bay access needed for maintenance
|
Front access only, 500 mm (19.7 in.)
|
Back clearance to bays (if necessary)
|
500 mm (19.7 in.)
|
7. The installation site meets the ground requirements of the ONS 15305 equipment. Table 3-1 lists these requirements.
Table 3-5 Recommended Ground Capacity
Item
|
Recommended Capacity
|
Total wight
|
maximum 5 Kg
|
3.3 Unpacking
Use the following considerations when unpacking and storing ONS 15305 equipment:
•Leave equipment packed until it is needed for immediate installation.
•Store packed equipment in the temperature and environmental conditions described in Chapter 2, "Product Overview."
•After unpacking the equipment, save and store the packaging material in case the equipment must be returned.
•If the packaging is damaged and possible equipment damage is present, preserve as much of the packaging as possible to allow Customer Service and the shipper to analyze the damage. To report damage to shipped articles, contact the Cisco Technical Assistance Center (TAC) to open an RMA. See the "Reporting Damage" section.
The following procedures contain specific instructions for unpacking ONS 15305 system equipment.
Unpack the ONS 15305
Caution When opening the shipping container, use caution to avoid damaging the contents.
Caution Static electricity can damage electro-optical equipment. While unpacking and handling optical and electrical modules, wear a grounding wrist strap to discharge the static buildup. Before unpacking and installing modules or making system interconnections, connect the grounding wrist strap. The grounding wrist strap is designed to prevent equipment damage caused by static electricity.
Note If any optical adapters are included in the container, remove them and save them for use while installing the module front-panel optical fiber jumper cables.
Step 1 Open the top of the cardboard shipping container.
Step 2 Remove the ONS 15305 accessory kit and documentation CD out of the shipping container.
Step 3 Take the ONS 15305 out of the shipping container.
Step 4 Take the ONS 15305 out of the plastic protective bag.
The ONS 15305 shipping container should contain the following items:
•One ONS 15305 configured as ordered
•One accessory kit (15305-SHIPKIT-74-3106-01) , which includes brackets and screws for 19" and 23" rack, disposable ESD wrist straps, one release rook for card extraction, one ONSCLI cable, one blade terminal with screw and blade jack, a registration and warranty card, and "Cisco ONS 15305 Quick Installation Guide."
