Table of Contents
Command Summary
All Cisco ONS 15200 Command Line Interface (CLI) users have either administrator, operator, or guest user privileges. This chapter lists the CLI commands according to user privilege type. See "General Commands," for more detailed information on the commands.
The following commands are available to users logged on with administrator privileges.
The following commands can be accessed from initial login mode:
commit user
configure system|user
create user
delete user
display user
exit
password
show user
source <dev > <filename >
whoami
The following commands can be accessed from the configure system command:
defrag <dev >
dnsconf [<hostname > <domain > <server1 > [<server2 >]]: Get/Set dns server(s)
exit
format <dev >
fschk <dev >
ftp
host <ipaddr |hostname >
ipconf [<ipaddr > <mask > <gateway >]
ipfilt add |list |remove |set |commit r
sntp server |timezone |freq |commit |dlst_on |dlst_off
ldboot [<dev > <filename > <count >]
list <dev >
macaddr
page [<len >]
password
reboot
remove <dev > <filename >
source <dev > <filename >
syslog
time [<yyyy:mm:dd > <hh:mm:ss >]
type <dev > <filename >
version
whoami
The following commands are available from the create user , configure user , and display user commands after a user has been created.
cd [<path >]
commit
exit
list parameter |recurse |value
upload [<path >]
whoami
The following commands are available in File Transfer Protocol (FTP) mode from the ftp command:
open <ipaddr >
close
user <name >
cd <path >
pwd
ls <path >
ascii
binary
syst
get <file >
put <file >
status
passive
quit
exit
The following commands are available to users logged on with guest user privileges.
The following commands are read-only for guest users in the initial login mode:
display clip |snm
exit
open eventlog |pmlog15 |pmlog24
password
show alarm |name |discrepancy |inventory |management |path |power
whoami
cd [<path >]
exit
list parameter |recursive |value
upload [<path >]
whoami
The following commands are available to users logged on with operator privileges.
commit management
configure clip |management |network |snm |system
display clip |snm
exit
open eventlog |pmlog 15 |pmlog24
clear eventlog |pmlog 15 |pmlog24
password
show alarm |name |discrepancy |inventory |management |path |power |user
source <dev > <filename >
whoami
The following commands can be accessed from the configure clip and display clip commands:
cd [<path >]
commit
exit
list parameter |recursive |value
no suppress |inhibit
suppress <path >
inhibit <path >
upload [<path >]
whoami
The following commands can be accessed from the configure management command:
cd [<path >]
create community |trap
commit trap |community
configure community |trap
delete community |trap
display community |trap
exit
list parameter |recursive |value
whoami
The following commands can be accessed from the create community , configure community , and display community commands:
cd [<path >]
exit
list parameter |recursive |value
whoami
The following commands can be accessed from the create trap , configure trap , and display trap commands:
cd [<path >]
exit
list parameter |recursive |value
whoami
The following commands can be accessed from the configure network command:
exit
create mcu|scu
commit clip|mcu|network|path|scu|snm
configure clip|mcu|path|scu|snm
delete mcu|scu
display clip|mcu|network|path|scu|snm
show inventory
list clip|mcu|path|scu|snm
The following commands can be accessed from the configure mcu and configure scu commands (after entering Network Configuration mode):
commit
exit
insert <element name >
list parameter |recursive |value
remove <element name >
whoami
The following commands can be accessed from the configure system command:
defrag <dev >
exit
fschk <dev >
host <ipaddr |hostname >
ldboot [<dev > <filename > <count >]
list <dev >
macaddr
page [<len >]
password
reboot
source <dev > <filename >
syslog
time [<yyyy:mm:dd > <hh:mm:ss >]
version
whoami
The following commands can be accessed from the open eventlog , open pmlog15 , and open pmlog24 commands:
exit
list parameter |recursive |value
read [<user >|-[<source >]]
rewind
starttime [[<yyyy:mm:dd >] <hh:mm:ss >]
endtime [[<yyyy:mm:dd >] <hh:mm:ss >]
username <name >[<name >]..
source <name >[<name >]..
whoami
Posted: Wed Oct 2 00:27:42 PDT 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement .