cc/td/doc/product/natkit
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table Of Contents

Mounting and Unmounting the Essentials CD-ROM on Solaris

Mounting a Local CD-ROM Drive

Mounting a Remote CD-ROM Drive

Unmounting the CD-ROM Drive

Mounting and Unmounting the Essentials CD-ROM on Solaris


This appendix gives general information on how to mount the Essentials CD-ROM on a Solaris 2.6 or 2.7 system. For more detailed instructions, consult your Sun documentation.

You can install Essentials from a CD-ROM mounted on the CiscoWorks server system or from a CD-ROM mounted on a remote Solaris system.

This appendix contains these sections:

Mounting a Local CD-ROM Drive

Mounting a Remote CD-ROM Drive

Unmounting the CD-ROM Drive

Mounting a Local CD-ROM Drive

Insert the Essentials CD-ROM into the CD-ROM drive and:


Step 1 Become the superuser by entering the command su and the root password at the command prompt, or log in as root. The command prompt changes to the pound sign (#).

Step 2 If the /cdrom directory does not already exist, enter the following command to create it:

# mkdir /cdrom

Step 3 Mount the CD-ROM drive.


Note The vold process manages the CD-ROM device and performs the mounting. The CD-ROM might automatically mount onto the /cdrom/cdrom0 directory.


If you are running File Manager, a separate File Manager window displays the contents of the CD-ROM.

If the /cdrom/cdrom0 directory is empty because the CD-ROM was not mounted, or if File Manager did not open a window displaying the contents of the CD-ROM, verify the vold daemon is running by entering:

# ps -e | grep vold | grep -v grep

If vold is running, the system displays the process identification number of vold. If the system does not display anything, restart the daemon by entering:

# /usr/sbin/vold &

If the vold daemon is running but did not mount the CD-ROM, stop the vold daemon and then restart it. To stop the vold process, you must know the process identification number. If you do not know the process identification number, you can get it by entering:

# ps -ef | grep vold | grep -v grep

Step 4 Stop the vold process by entering:

# kill -15 process_ID_number

Step 5 Restart the vold process by entering:

# /usr/sbin/vold &

If you encounter problems using the vold daemon, enter the following command to mount the CD-ROM:

# mount -F hsfs -r ro /dev/dsk/c xt yd0s z /cdrom/cdrom0

where x is the CD-ROM drive controller number, y is the CD-ROM drive SCSI ID number, and z is the slice of the partition on which the CD-ROM is located.


You have now mounted the CD-ROM drive. Refer to Chapter 1, "Installing Essentials" for instructions on installation.

Mounting a Remote CD-ROM Drive

Insert the Essentials CD-ROM into the CD-ROM drive of the remote machine and perform Step 1 through Step 12 on the remote machine.


Step 1 Become the superuser by entering the command su and the root password at the command prompt, or log in as root. The command prompt changes to the pound sign (#).

If the /cdrom directory does not already exist, enter:

# mkdir /cdrom

Step 2 Mount the CD-ROM drive.


Note The vold daemon process manages the CD-ROM device and performs the mounting. The CD-ROM might automatically mount onto the /cdrom/cdrom0 directory.


If you are running File Manager, a separate File Manager window displays the contents of the CD-ROM.

Step 3 If the /cdrom/cdrom0 directory is empty because the CD-ROM was not mounted, or if File Manager did not open a window displaying the contents of the CD-ROM, verify that the vold daemon is running by entering:

# ps -e | grep vold | grep -v grep

Step 4 If vold is running, the system displays /usr/sbin/vold. If the system does not display anything, restart the daemon by entering:

# /usr/sbin/vold &

Step 5 If the vold daemon is running but did not mount the CD-ROM, stop the vold daemon and then restart it. To stop the vold process, you must know the process identification number. If you do not know the process identification number, you can get it by entering:

# ps -ef | grep vold | grep -v grep

Step 6 Stop the vold process by entering:

# kill -15 process_ID_number

Step 7 Restart the vold process by entering:

# /usr/sbin/vold &

Step 8 If you encounter problems using the vold daemon, enter the following to mount the CD-ROM:

# mount -F hsfs -r ro /dev/dsk/c xt yd0s z /cdrom/cdrom0

where x is the CD-ROM drive controller number, y is the CD-ROM drive SCSI ID number, and z is the slice of the partition on which the CD-ROM is located.

Step 9 Use a text editor to create an /etc/dfs/dfstab file, if one does not exist.

Step 10 Add the following line to the /etc/dfs/dfstab file:

share -F nfs -o ro /cdrom/cdrom0

Step 11 Make sure your remote machine is enabled as an NFS server by entering:

# ps -ef | grep nfs | grep -v grep

The output of this command indicates whether the /usr/lib/nfs/nfsd and /usr/lib/nfs/mountd daemons are running. If they are not running, enable your machine as an NFS server by entering:

# /etc/init.d/nfs.server start

If your machine is enabled as an NFS server, enter one of the following:

# share
# shareall

Step 12 Go to the machine on which you want to install Essentials.

Step 13 Log on as superuser by entering the command su and the root password, or log in as root.

Step 14 Create a /cdrom directory, if one does not already exist, by entering:

# mkdir -p /cdrom/rme20

Step 15 To mount the CD-ROM drive, enter:

# /usr/sbin/mount -r remote_machine_name :/cdrom/cdrom0 /cdrom/rme20

You have now mounted the CD-ROM drive. Refer to Refer to Chapter 1, "Installing Essentials" for instructions on installation.

Unmounting the CD-ROM Drive

After you complete the Essentials installation, you need to unmount the CD-ROM drive and eject the CD-ROM.

To unmount a local CD-ROM drive, as root, enter:

# cd # umount /cdrom/cdrom0 # eject

To unmount a remote CD-ROM drive:


Step 1 As root, enter the following on the local machine:
# umount /cdrom/rme20

Step 2 As root, enter the following on the remote machine:
# umount /cdrom/cdrom0

# eject

Note Instead of using the eject command, you can select File > Eject from the FileManager.



hometocprevnextglossaryfeedbacksearchhelp

Posted: Wed Mar 10 11:21:48 PST 2004
All contents are Copyright © 1992--2004 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.