|
Table Of Contents
Release Notes for the Cisco Metro 1500 Series
Obtaining Technical Assistance
Release Notes for the Cisco Metro 1500 Series
Date: August 6, 2001
Text Part Number: 78-10596-04 B0
This document describes the caveats for the Cisco Metro 1500 series metropolitan area network (MAN) dense wavelength division multiplexing (DWDM) documentation set.
Note Although the software image in a new Cisco Metro 1500 series system operates correctly, later software images containing the latest upgrades and modifications are released regularly to provide you with the most optimized software available. We strongly recommend that you check for the latest released software images at the World Wide Web locations listed in the "World Wide Web" section.
Contents
This document consists of the following sections:
• Caveats
• Obtaining Technical Assistance
Introduction
The Cisco Metro 1500 series system is a high-performance, wavelength division multiplexer that provides bidirectional data communication. It is designed for communication over optical links in which different devices or applications are communicating over multiple fibers. Using wavelength conversion, several devices can communicate while being connected over one duplex fiber or two single fibers.
The Cisco Metro 1500 series system expands the distance and application capabilities of existing local area networks (LANs), metropolitan area networks (MANs), and storage area networks (SANs). It is protocol-independent and can support virtually any fiber-optic device.
New and Changed Information
This section lists new features that appear in this release of the Cisco Metro 1500 series.
Caveats
This section describes the caveats in the Cisco Metro 1500 series system.
CSCdr00712
Symptom: If you hot swap the network element management interface (NEMI) module in a Cisco Metro 1500 series system, the metro1500PSTable entry in the SNMP table does not display "ON". This error is intermittent; it does not happen each time you hot swap a NEMI.
Workaround: Wait until the SNMP daemon polls all the entries.
Restrictions
The following restrictions apply to the Cisco Metro 1500:
•The Cisco Metro 1500 series system does not support the use of standard reach lasers. The specifications provided for the transmitter output power, link loss budget, and calculated link distance of the WCMs pertain only to the extended category and not to the standard category.
•The TDM 4 x ESCON wavelength channel module does not support single mode fiber.
Default Password
The default password for the root, netadmin, ppp, and user accounts is ChgMeNOW. For security reasons, you should change all four account passwords as soon as possible. Log in as root and use the password command to change the passwords for all the accounts.
If you do not receive a password prompt, then an unsupported adapter is being used to connect to the
Cisco Metro 1500 serial port. Use only the DB-9 to RJ-45 adapter that shipped with the unit.Related Documentation
The following documents are available for the Cisco Metro 1500 series system:
•Cisco Metro 1500 Series Hardware Installation Guide
Customer order number DOC-7810588=
www.cisco.com/univercd/cc/td/doc/product/mels/cmet1500/hwguide/index.htm•Cisco Metro 1500 Series Software Configuration Guide
Customer order number DOC-7810590=
www.cisco.com/univercd/cc/td/doc/product/mels/cmet1500/swguide/index.htmSee the "Obtaining Documentation" section.
Obtaining Documentation
The following sections provide sources for obtaining documentation from Cisco Systems.
World Wide Web
You can access the most current Cisco documentation on the World Wide Web at the following sites:
•http://www.cisco.com
•http://www-china.cisco.com
•http://www-europe.cisco.com
Documentation CD-ROM
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM is updated monthly and may be more current than printed documentation. The CD-ROM package is available as a single unit or as an annual subscription.
Ordering Documentation
Cisco documentation is available in the following ways:
•Registered Cisco Direct Customers can order Cisco Product documentation from the Networking Products MarketPlace:
http://www.cisco.com/cgi-bin/order/order_root.pl
•Registered Cisco.com users can order the Documentation CD-ROM through the online Subscription Store:
http://www.cisco.com/go/subscription
•Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco corporate headquarters (California, USA) at 408 526-7208 or, in North America, by calling 800 553-NETS(6387).
Documentation Feedback
If you are reading Cisco product documentation on the World Wide Web, you can submit technical comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco.
You can e-mail your comments to bug-doc@cisco.com.
To submit your comments by mail, for your convenience many documents contain a response card behind the front cover. Otherwise, you can mail your comments to the following address:
Cisco Systems, Inc.
Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883We appreciate your comments.
Obtaining Technical Assistance
Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample configurations from online tools. For Cisco.com registered users, additional troubleshooting tools are available from the TAC website.
Cisco.com
Cisco.com is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This highly integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.
Cisco.com provides a broad range of features and services to help customers and partners streamline business processes and improve productivity. Through Cisco.com, you can find information about Cisco and our networking solutions, services, and programs. In addition, you can resolve technical issues with online technical support, download and test software packages, and order Cisco learning materials and merchandise. Valuable online skill assessment, training, and certification programs are also available.
Customers and partners can self-register on Cisco.com to obtain additional personalized information and services. Registered users can order products, check on the status of an order, access technical support, and view benefits specific to their relationships with Cisco.
To access Cisco.com, go to the following website:
http://www.cisco.com
Technical Assistance Center
The Cisco TAC website is available to all customers who need technical assistance with a Cisco product or technology that is under warranty or covered by a maintenance contract.
Contacting TAC by Using the Cisco TAC Website
If you have a priority level 3 (P3) or priority level 4 (P4) problem, contact TAC by going to the TAC website:
http://www.cisco.com/tac
P3 and P4 level problems are defined as follows:
•P3—Your network performance is degraded. Network functionality is noticeably impaired, but most business operations continue.
•P4—You need information or assistance on Cisco product capabilities, product installation, or basic product configuration.
In each of the above cases, use the Cisco TAC website to quickly find answers to your questions.
To register for Cisco.com, go to the following website:
http://www.cisco.com/register/
If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users can open a case online by using the TAC Case Open tool at the following website:
http://www.cisco.com/tac/caseopen
Contacting TAC by Telephone
If you have a priority level 1(P1) or priority level 2 (P2) problem, contact TAC by telephone and immediately open a case. To obtain a directory of toll-free numbers for your country, go to the following website:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
P1 and P2 level problems are defined as follows:
•P1—Your production network is down, causing a critical impact to business operations if service is not restored quickly. No workaround is available.
•P2—Your production network is severely degraded, affecting significant aspects of your business operations. No workaround is available.
Posted: Thu Aug 30 06:53:45 PDT 2007
All contents are Copyright © 1992--2007 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.