Table Of Contents

Specifications

Chassis Specifications

Channel to Wavelength Mapping

Mux/Demux Motherboard Specifications

4-Channel OADM Module Specifications

8-Channel OADM Module Specifications

16-Channel OADM Module Specifications

Line Card Motherboard Specifications

2.5-Gbps Transponder Module Specifications

Type 2 Extended Range Transponder Module Specifications

SFP Optics Specifications

Specifications

---

This appendix describes the specifications for the line card motherboards and transponder modules, and the mux/demux motherboards and modules used in the Cisco ONS 15540 ESP system. This appendix includes the following sections:

• Chassis Specifications

• Channel to Wavelength Mapping

• Mux/Demux Motherboard Specifications

• 4-Channel OADM Module Specifications

• 8-Channel OADM Module Specifications

• 16-Channel OADM Module Specifications

• Line Card Motherboard Specifications

• 2.5-Gbps Transponder Module Specifications

• Type 2 Extended Range Transponder Module Specifications

---

Note Cisco recommends you to use the Cisco MetroPlanner tool to design your DWDM networks. For more information about optical power budgets and network planning, refer to the Cisco ONS 15540 ESP Planning Guide and the Cisco MetroPlanner DWDM Operations Guide.

---

Chassis Specifications

Table A-1 lists the specifications for the Cisco ONS 15540 ESP chassis.

Table A-1 Cisco ONS 15540 ESP Specifications 

Description	Specification
Environmental
Temperature, ambient operating	32 to 104°F (0° to +40°C)
Humidity (RH1 ), ambient (noncondensing) operating	90 to 95 percent
Physical Characteristics
Dimensions (H x W x D)	24.5 x 17.3 x 12 in. (62.2 x 43.9 x 30.4 cm)
Weight	Chassis and Power Cord: 51 lbs (23.1 kg) Chassis fully loaded:153 lbs (69.40 kg)
Optical ports	SC, MU, MT-RJ, LC, MPX
Fan assembly	2.5A at -48 VDC
Processor card	5.5 lbs (2.50 kg) 18 x 9 in. (45.7 x 22.9 cm)
AC-Input Power
AC-input voltage	100 to 240 VAC (nominal) 85 to 264 VAC (full range)
Current maximum	13.2A (100 VAC), 6.6A (200 VAC)
Power consumption maximum	1320W
Heat dissipation	4500 BTU/hr
DC-Input Power
DC-input voltage	-48 to -60 VDC (nominal) -40.5 to -72 VDC (full range)
Power consumption maximum	1125W
Heat dissipation	3840 BTU/hr

1 RH = relative humidity

Channel to Wavelength Mapping

Table A-2 lists the channels, wavelengths, and frequencies for each band.

Table A-2 Channel to Wavelength Mapping 

Cisco ONS 15540 ESP Band	Cisco ONS 15540 ESP Channel	ITU Channels	ITU Wavelength1	ITU Frequency2
OSC3		19	1562.23	191.900
A	1	21	1560.61	192.100
	2	22	1559.79	192.200
	3	23	1558.98	192.300
	4	24	1558.17	192.400
B	5	26	1556.55	192.600
	6	27	1555.75	192.700
	7	28	1554.94	192.800
	8	29	1554.13	192.900
C	9	31	1552.52	193.100
	10	32	1551.72	193.200
	11	33	1550.92	193.300
	12	34	1550.12	193.400
D	13	36	1548.51	193.600
	14	37	1547.72	193.700
	15	38	1546.92	193.800
	16	39	1546.12	193.900
E	17	41	1544.53	194.100
	18	42	1543.73	194.200
	19	43	1542.94	194.300
	20	44	1542.14	194.400
F	21	46	1540.56	194.600
	22	47	1539.77	194.700
	23	48	1538.98	194.800
	24	49	1538.19	194.900
G	25	51	1536.61	195.100
	26	52	1535.82	195.200
	27	53	1535.04	195.300
	28	54	1534.25	195.400
H	29	56	1532.68	195.600
	30	57	1531.90	195.700
	31	58	1531.12	195.800
	32	59	1530.33	195.900

1 Wavelengths in vacuum in nm 2 Frequency in THz, 100 GHz grid 3 OSC = optical supervisory channel

Mux/Demux Motherboard Specifications

Table A-3 lists the specifications for the mux/demux motherboard.

Table A-3 Mux/Demux Motherboard Specifications  

Description	Specification
Fiber type	SM1 9 micron
Connector	MU
Output wavelength	1562.23 nm, ITU channel
Dimensions	3.7 x 9 in. (9.4 x 22.9 cm)
Weight	3.5 lbs (1.59 kg)
Receiver	Minimum	Maximum
Receive sensitivity	-19 dBm
Receive overload		-1.5 dBm
Input wavelength	1530.33 nm	1562.23 nm
Optical reflectance	-27 dB
Side mode suppression	30 dB
Transmitter	Minimum	Maximum
Transmitter power	4 dBm	8 dBm
Output wavelength	1530.33 nm	1560.61 nm
Dispersion tolerance		1800 ps/nm2 3

1 SM = single mode 2 ps/nm = picoseconds per nanometer 3 1800 ps/nm at OC-48 rate

4-Channel OADM Module Specifications

Table A-4 lists the specifications for the 4-channel and 4-channel with OSC OADM module.

Table A-4 4-Channel and 4-Channel with OSC Mux/Demux Modules 

Description	Specification
Dimensions	1.0 x 3.3 x 7.7 in. (+1.5 in. for handle) (2.5 x 8.4 x 19.6 cm [+3.8 cm for handle])
Weight	0.5 lbs (.23 kg)
Fiber	ITU-T G.652 compliant
OSC1	1562.23 nm
Connector	MU
Operating temperature	32 to 104°F (0 to 40°C)
Storage temperature	-40 to 85°F (-40 to 29.4°C)
Channel mapping	Bands A to H2
Maximum relative humidity	90 to 95%

1 OSC = optical supervisory channel. 2 See Table A-2 for band A to H wavelengths.

8-Channel OADM Module Specifications

Table A-5 lists the specifications for the 8-channel and 8-channel with OSC OADM module.

Table A-5 8-Channel and 8-Channel with OSC OADM Modules 

Description	Specification
Dimensions	1.0 x 3.3 x 7.7 in. (+1.5 in. for handle) (2.5 x 8.4 x 19.6 cm [+3.8 cm for handle])
Weight	1.0 lbs (0.45 kg)
Fiber	ITU-T G.652 compliant
OSC1	1562.23 nm
Connector	MU
Operating temperature	32 to 104°F (0 to 40°C)
Storage temperature	-40 to 85°F (-40 to 29.4°C)
Channel mapping	Channels AB, CD, EF, and GH2
Maximum relative humidity	90 to 95%

1 OSC = optical supervisory channel. 2 See Table A-2 for band A to H wavelengths.

16-Channel OADM Module Specifications

Table A-6 lists the specifications for the 16-channel OADM module.

Table A-6 16-Channel OADM Modules 

Description	Specification
Dimensions	1.0 x 6.6 x 7.7 in. (+1.5 in.for handle) (2.5 x 2.0 x 19.6 cm [+3.8 cm for handle])
Weight	1.5 lbs (0.68 kg)
Fiber	ITU-T G.652 compliant
OSC1	1562.23 nm
Connectors	MU
Operating temperature	0 to 65°C
Storage temperature	-40 to 85 °C
Wavelengths	32, ITU G.692

1 OSC = optical supervisory channel

Line Card Motherboard Specifications

Table A-7 lists the specifications for the 2.5-Gbps line card motherboard.

Table A-7 2.5-Gbps Line Card Motherboard Specifications

Description	Specification
Dimensions	18 x 9 in. (45.72 x 22.86 cm)

Table A-8 lists the specifications for the 10-Gbps line card motherboard.

Table A-8 10-Gbps Line Card Motherboard Specifications

Description	Specification
Dimensions	1.3 x 9.1 x 18.1 in. (3.3 x 23.11 x 45.97 cm)

2.5-Gbps Transponder Module Specifications

Table A-9 lists the client side optical specifications for the 2.5-Gbps transponder module.

Table A-9 2.5-Gbps SM and MM Transponder Client Side Specifications 

Description	Specification
Dimensions	3 x 7.5 in. (7.6 x 19.1 cm)
Weight
Connector	SC
Trunk connector	MUJ
Receiver	Single Mode		Multimode
	Minimum	Maximum	Minimum	Maximum
Bit rate	16 Mbps	2.5 Gbps	16 Mbps	622 Mbps
Receive sensitivity	-19 dBm		-25 dBm
Receive overload		-1.5 dBm		-8 dBm
Input wavelength	1249 nm	1600 nm	1249 nm	1600 nm
Transmitter power	-5 dBm	0 dBm	-5 dBm	0 dBm
Output wavelength	1260 nm	1360 nm	1260 nm	1360 nm

Table A-10 lists the trunk side optical specifications for the 2.5-Gbps transponder module.

Table A-10 2.5-Gbps Trunk Side Optical Specifications 

Description	Specification
Fiber type	ITU-T G.652 compliant
Connector	MUJ
Receiver	Minimum	Maximum
OSNR 1 , 2	19 dB
Receive sensitivity 2	-28 dBm
Receive overload		-8 dBm
Input wavelength	1260 nm	1580 nm
Transmitter	Minimum	Maximum
Transmitter power	4 dBm	8 dBm
Dispersion tolerance		1800 ps/nm3

1 OSNR = optical signal-to-noise ratio. 2 Add the proper network-level penalty to the OSNR and/or receive power based on your actual network topology characteristics, such as dispersion. 3 ps/nm = picoseconds per nanometer.

 

Type 2 Extended Range Transponder Module Specifications

Table A-11 lists the specifications for the Type 2 extended range transponder modules.

Table A-11 Type 2 Extended Range Transponder Module Specifications  

Description	Specification
Fiber	ITU-T G.652 compliant
Receiver Specifications	Minimum	Maximum
OSNR1	19 db
Receive sensitivity 1	-28 dBm
Receive overload		-8 dBm
Input wavelength	1430 nm	1580 nm
Transmitter Specification	Minimum	Maximum
Output power	5 dBm	10 dBm
Dispersion tolerance		3200 ps/nm

1 Add the proper network level penalty to the OSNR and/or receive power based on your actual network topology characteristics, such as dispersion.

SFP Optics Specifications

Table A-12 lists the specifications for the Cisco ONS 15540 ESP fixed rate SFP optics.

---

Note Only use Cisco-certified SFP optics for the Type 2 extended range transponders.

---

Table A-12 Fixed Rate SFP Optics Specifications 

Description	Specification
Part number	15500-XVRA-01A2
ESCON, OC-3/STM-1 MM
Dimensions (H x W x D)	0.486 x 0.522 x 2.24 in. (1.23 x 1325.9 x 5.69 cm)
Data rate	155 Mbps, 200 Mbps
Wavelength	1310 nm
Fiber type	MM, 50/125 µm, 62.5/125 µm
Connector type	MT-RJ
Receiver	Minimum	Maximum
Receive sensitivity	-33 dBm	-14 dBm
Input wavelength	1280 nm	1380 nm
Transmitter	Minimum	Maximum
Transmitter power	-19.5 dBm	-15 dBm
Output wavelength	1280 nm	1380 nm
Part number	15500-XVRA-02C1
Gigabit Ethernet, Fibre Channel (1 Gbps), and FICON (1-Gbps) MM
Dimensions	0.486 x 0.522 x 2.24 in. (1.23 x 1325.9 x 5.69 cm)
Data rate	1.0625 Gbps, 1.25 Gbps
Wavelength	850 nm
Fiber type	MM, 50/125 µm, 62.5/125 µm
Connector type	LC
Receiver	Minimum	Maximum
Receive sensitivity	-18 dBm
Stressed receive sensitivity	-13.5 dBm
Input wavelength	770 nm	860 nm
Transmitter	Minimum	Maximum
Transmitter power	-9.5 dBm	-4 dBm
Output wavelength	830 nm	860 nm
Part number	15500-XVRA-03B1
Gigabit Ethernet, Fibre Channel (1 Gbps), and FICON (1Gbps) SM
Dimensions	0.486 x 0.522 x 2.24 in. (1.23 x 1325.9 x 5.69 cm)
Data rate	1.0625 Gbps, 1.25 Gbps
Wavelength	1310 nm
Fiber type	SM, 9/125 µm
Connector type	LC
Receiver	Minimum	Maximum
Input power	-20.5 dBm	-3 dBm
Input wavelength	1270 nm	1600 nm
Transmitter	Minimum	Maximum
Transmitter power	-9.5 dBm	-3 dBm
Output wavelength	1275 nm	1350 nm
Part number	15500-XVRA-03B2
Fibre Channel (1 Gbps and 2 Gbps) and FICON (1 Gbps and 2 Gbps) SM
Dimensions	0.486 x 0.522 x 2.24 in. (1.23 x 1325.9 x 5.69 cm)
Data rate	1.0625 Gbps, 2.125 Gbps
Wavelength	1310 nm
Fiber type	SM, 9/125 µm
Connector type	LC
Receiver	Minimum	Maximum
Receive sensitivity	-20.5 dBm
Input wavelength	1270 nm	1600 nm
Transmitter	Minimum	Maximum
Transmitter power	-9.5 dBm	-3 dBm
Output wavelength	1275 nm	1350 nm
Part number	15500-XVRA-02C2
Fibre Channel (1 Gbps and 2 Gbps) and FICON (1 Gbps and 2 Gbps) MM
Dimensions	0.486 x 0.522 x 2.24 in. (1.23 x 1325.9 x 5.69 cm)
Data rate	2.125 Gbps
Wavelength	850 nm
Fiber type	MM, 50/125 µm, 62.5/125 µm
Connector type	LC
Receiver	Minimum	Maximum
Receive sensitivity <= 1.06 Gbps)	-18 dBm
Receive sensitivity (> 1.06 Gbps)	-15 dBm
Stressed receive sensitivity (<= 1.06 Gbps)	-13.5 dBm
Stressed receive sensitivity (> 1.06 Gbps)	-12.1 dBm	-12.1 dBm
Input wavelength	770 nm	860 nm
Transmitter	Minimum	Maximum
Transmitter power	-9 dBm	-4 dBm
Output wavelength	830 nm	860 nm
Part number	15500-XVRA-06B1
OC-12/STM-4 SM
Dimensions	0.486 x 0.522 x 2.24 in. (1.23 x 1325.9 x 5.69 cm)
Data rate	622 Mbps
Wavelength	1310 nm
Fiber type	SM, 9/125 µm
Connector type	LC
Receiver	Minimum	Maximum
Receive sensitivity	-28 dBm
Receive overload		-7 dBm
Input wavelength	1100 nm	1600 nm
Transmitter	Minimum	Maximum
Transmitter power	-15 dBm	-8 dBm
Output wavelength	1260 nm	1360 nm
Part number	15500-XVRA-07B1
OC-48/STM-16 SM
Dimensions	0.486 x 0.522 x 2.24 in. (1.23 x 1325.9 x 5.69 cm)
Data rate	2.488 Mbps
Wavelength	1310 nm
Fiber type	SM, 9/125 µm
Connector type	LC
Receiver	Minimum	Maximum
Receive sensitivity	-18 dBm
Receive overload		-3 dBm
Input wavelength	1270 nm	1600 nm
Transmitter	Minimum	Maximum
Transmitter power	-9.5 dBm	-3 dBm
Output wavelength	1285 nm	1340 nm

Table A-13 lists the specifications for the Cisco ONS 15540 ESP variable rate SFP optics.

---

Note Only use Cisco-certified SFP optics for the Type 2 extended range transponders.

---

Table A-13 Variable Rate SFP Optics Specifications 

Description	Specification
Part number	15500-XVRA-10A1
Supported protocol encapsulations	Sysplex, Fast Ethernet, OC-3/STM-1, ESCON (MM)
Dimensions	0.486 x 0.522 x 2.24 in. (1.23 x 1325.9 x 5.69 cm)
Data rate	8 to 200 Mbps
Wavelength	1310 nm
Fiber type	MM 50/125 µm MM 62.5/125 µm
Connector type	LC
Receiver	Minimum	Maximum
Receive sensitivity @10-12 BER1	-32 dBm
Receive sensitivity @10-15 BER	-29 dBm
Receive overload @10-12  BER		-14 dBm
Input wavelength	1100 nm	1600 nm
Transmitter	Minimum	Maximum
Transmitter power	-19 dBm	-14 dBm
Output wavelength	1280 nm	1380 nm
Part number	15500-XVRA-10B1
Supported protocol encapsulations	Sysplex, Fast Ethernet, OC-3/STM-1, ESCON (SM)
Dimensions	0.486 x 0.522 x 2.24 in. (1.23 x 1325.9 x 5.69 cm)
Data rate range	8 Mbps to 200 Mbps
Wavelength	1310 nm
Fiber type	SM, 9/125 µm
Connector type	LC
Receiver	Minimum	Maximum
Receive sensitivity @10-12 BER	-32 dBm
Receive overload @10-12  BER		-3 dBm
Input wavelength	1100 nm	1600 nm
Transmitter	Minimum	Maximum
Transmitter power	-8 dBm	-4 dBm
Output wavelength	1260 nm	1360 nm
Part number	15500-XVRA-11A1
Supported protocol encapsulations	ESCON, OC-12/STM-4
Dimensions	0.486 x 0.522 x 2.24 in. (1.23 x 1325.9 x 5.69 cm)
Data rate range	200 Mbps to 622 Mbps
Wavelength	1310 nm
Fiber type	MM 62.5/125 µm
Connector type	LC
Receiver	Minimum	Maximum
Receive sensitivity @10-10 BER	-26 dBm
Receive sensitivity @10-12 BER	-25 dBm
Maximum receive power @10-10  BER		-14
Input wavelength	1100 nm	1600 nm
Transmitter	Minimum	Maximum
Transmitter power	-20 dBm	-14 dBm
Output wavelength	1270 nm	1380 nm
Part number	15500-XVRA-11B1
Supported protocol encapsulations	ESCON, SONET OC-12, SDH STM-4, FC, GE
Dimensions	0.486 x 0.522 x 2.24 in. (1.23 x 1325.9 x 5.69 cm)
Data rate range	200 Mbps to 1.25 Gbps
Wavelength	1310 nm
Fiber type	SM, 9/125 µm
Connector type	LC
Receiver	Minimum	Maximum
Receive sensitivity @10-12 BER	-20 dBm
Maximum receive power @10-12 BER		-3 dBm
Input wavelength	1100 nm	1600 nm
Transmitter	Minimum	Maximum
Transmitter power	-9 dBm	-3 dBm
Output wavelength	1285 nm	1345 nm
Part number	15500-XVRA-12B1
Supported protocol encapsulations	Fibre Channel, FICON, GE, OC-48/STM-16
Dimensions	0.486 x 0.522 x 2.24 in (1.23 x 1325.9 x 5.69 cm)
Data rate range	1.062 Mbps to 2.488 Gbps
Wavelength	1310 nm
Fiber type	SM, 9/125 µm
Connector type	LC
Receiver	Minimum	Maximum
Receive sensitivity @10-10 BER	-18 dBm
Maximum receive power @10-10  BER		-3 dBm
Input wavelength	1100 nm	1600 nm
Transmitter	Minimum	Maximum
Transmitter power	-10 dBm	-3 dBm
Output wavelength	1266 nm	1360 nm

1 BER = bit error rate

Posted: Wed Jul 5 18:20:13 PDT 2006
All contents are Copyright © 1992--2006 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.