cc/td/doc/product/lan/c29xx
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Repacking a Switch

Repacking a Switch

If you need to return or move a Catalyst 2926 or Catalyst 2926G series switch, follow these steps to repack the switch using the original packaging material:

Step 1 Slide the padding foam over the switch (see Figure D-1).

Step 2 Place the accessory kit on the top packing material.

Step 3 Place the outside carton over the entire package.

Step 4 Fold the outside carton down over the top of the accessory boxes and seal with packing tape.


Figure D-1: Switch Packing Material



hometocprevnextglossaryfeedbacksearchhelp
Posted: Thu Jul 1 13:21:51 PDT 1999
Copyright 1989-1999©Cisco Systems Inc.