By default, Cluster Manager displays the command switch as the first (top) device in
the cluster, but you can change the order of the switches to reflect the physical setup in
your wiring closet.
To reposition cluster members:
Click the device to be repositioned.
To reposition a range of switches, hold down the Shift key and select the
first and last switch in the range.
Click the up or down arrow button to move the selected devices to the new position.
Repeat Steps 1 and 2 for any additional switches.
To undo any changes, click Refresh to reposition devices in the positions
where they were last saved. Note: To undo your changes, you must click Refresh
before you click Apply.
Click Apply to put your changes in effect and continue repositioning
devices.