Table of Contents
index
- AAA authentication
- configuring for PPP 5-13
- aaa authentication command 4-13
- aaa authentication ppp command 5-14
- aaa authorization command 4-13
- aaa new-model command 4-13, 5-14
- AAA server group support for proxy services
- configuirng 4-32
- verifying 4-33
- accept dialin command 2-3
- Access-Accept message 4-4, 4-5
- access control list
- see ACL
- Access-Reject message 4-4
- Access-Request message 4-5, 4-40
- Account-Info attributes 4-40
- service group profiles 4-57
- user profiles 4-43
- accounting records
- Account Logoff 4-35
- Account Logon 4-35
- attributes 4-37
- Connection Start 4-36
- Connection Stop 4-36
- Account Logoff accounting record 4-35, 4-66
- Account Logon accounting record 4-35
- ACL
- downstream 4-40, 4-43, 4-47, 4-48, 4-59
- packet filtering 4-6
- upstream 4-40, 4-43, 4-47, 4-59
- ADSL 4-38
- asynchronous transfer mode
- see ATM
- ATM interface
- configuring PPPoE 5-6
- ATM RBE
- benefits 6-3
- configuration examples 6-4
- configuring 6-4
- restrictions 6-4
- verifying 6-5
- attr command 4-12
- authentication
- local 5-14
- RADIUS 5-14
- TACACS+ 5-15
- Auto Service attribute 4-41, 4-43, 4-44
- bridging
- (examples) 6-2
- configuring 6-1
- RFC 1483 example 6-2
- CEF
- configuring 4-17
- L2TP scalability prerequisite 2-1
- restrictions 4-10
- verifying 4-17
- Cisco 6400 4-2, 4-8
- Cisco 6400 Software Setup Guide 4-8
- Cisco-AVPair attributes
- list of 4-40
- PTA-MD 4-6
- service profiles 4-47, 4-48
- Transparent Passthrough Filter pseudo-service profile 4-59
- user profiles 4-43
- VPDN 4-20
- Cisco Express Forwarding
- see CEF
- Cisco Service Selection Dashboard
- see Cisco SSD
- Cisco SESM
- Group Description attribute 4-57
- overview 4-1
- proxy service 4-5
- PTA-MD 4-6
- Service User attribute 4-37, 4-42
- SSG default network 4-13
- Cisco SSD
- required version for single host login 4-11
- Cisco Subscriber Edge Services Manager
- see Cisco SESM
- clear ssg connection command 4-67
- clear ssg host command 4-67
- clear ssg next-hop command 4-67
- clear ssg pass-through-filter command 4-67
- clear ssg service command 4-67
- clear vpdn tunnel l2tp command 6-9
- concurrent access 4-42, 4-46, 4-47, 4-54
- concurrent service access mode 4-7
- configuring
- AAA server group support for proxy services 4-32
- ATM RBE 6-4
- bridging 6-1
- CEF 4-17
- default network 4-13
- fastswitching 4-15
- host key 4-28
- IPCP subnet mask
- on CPE 6-11
- L2TP 2-2
- LAC to communicate with RADIUS server 2-5
- LNS 4-21
- local forwarding 4-23
- local pool group for IP OAP 6-14
- local service profiles 4-12
- MPLS 3-2
- MPLS VPNs 3-7
- NAT 4-17
- NME interface IP address on NSP 6-6
- NRP as LAC 4-19
- NRPs as MPLS edge LSRs, connecting through VPI range 3-5
- NRPs as MPLS edge LSRs and connecting through PVP 3-3
- open garden 4-24
- PPP 5-1
- AAA authentication 5-3
- PPP autosense 5-9
- PPPoA 5-2
- PPPoE 5-5
- virtual template 5-5
- PPPoE on ATM interface 5-6
- PPP virtual template 5-2
- proxy RADIUS enhancements 4-33
- RADIUS profile for domain preauthorization 2-6
- RADIUS profile for tunnel service authorization 2-6
- RADIUS profiles 4-39
- pseudo-service profiles 4-59
- service group profiles 4-56
- service profiles 4-46
- SSG L2TP 4-19
- user profiles 4-42
- RADIUS VC logging 6-6
- RADIUS VC logging on NRP 6-7
- routing 6-1
- security 4-13
- sessions per tunnel limiting LAC 2-9
- sessions per tunnel limiting RADIUS profile 2-10
- SSG features 4-11
- SSG interfaces 4-14
- SSG multicast 4-16
- SSG RADIUS interim accounting 4-16
- SSG services 4-15
- SSG with L2TP Service Type 4-19
- subnet mask 6-9
- on NRP 6-10
- RADIUS user profile 6-10
- TCP Redirect - Logon 4-26
- tunnel sharing in RADIUS profile 2-13
- tunnel sharing LAC 2-12
- VPDN on the LAC 2-2
- VPDN on the LNS 2-3
- VPI/VCI indexing to service profile 4-18
- Connection Start accounting record 4-36
- Connection Stop accounting record 4-36, 4-66
- control channel parameters 6-8
- Control-Info attributes 4-42
- conventions xiv
- debug radius command 4-68
- default network 4-4, 4-6
- configuring 4-13
- example 4-63
- verifying 4-14
- Digital Subscriber Line Access Multiplexers (DSLAMs) 4-2
- DNS 4-41, 4-46, 4-47, 4-50, 4-51
- DNS redirection 4-7
- DNS Server Address attribute 4-41, 4-47, 4-50
- documentation, obtaining xv
- document conventions xiv
- Domain Name attribute 4-41, 4-47, 4-53
- domain name system
- see DNS
- domain preauthorization
- configuring RADIUS profile 2-6
- enabling 2-5
- example 2-8
- RADIUS user profile 2-6
- example 2-8
- tunnel service authorization step 2-4
- downlink interface 4-5, 4-14
- downstream ACL attribute 4-40, 4-43, 4-47, 4-48, 4-59
- enabling
- domain preauthorization 2-5
- SSG 4-12
- VPDN and multihop functionality 2-16
- encapsulation command 2-3
- extended high system availability (EHSA) 4-8
- fastswitching
- configuring 4-15
- example 4-65
- verifying 4-16
- Full Username Attribute 4-33, 4-41, 4-47, 4-51
- Group Description attribute 4-41, 4-57
- hold-queue
- command 6-3
- configuring limits 6-3
- default limits (table) 6-2
- input 6-2
- output 6-2
- verifying limits 6-3
- host key
- benefits 4-8
- configuring 4-28
- monitoring and troubleshooting 4-31
- prerequisites 4-11
- restrictions 4-10
- verifying 4-31
- Idle-Timeout attribute 4-7, 4-43, 4-48
- IGMP 4-5
- SSG multicast 4-16
- inacl attribute 4-6, 4-40, 4-43, 4-44, 4-47, 4-49, 4-60
- ingress tunnel name
- mapping to LNS 2-17
- VPDN tunnel authorization search by 2-17
- initiate-to command 2-9
- input hold-queue limit
- configuring 6-3
- default 6-2
- description 6-2
- verifying 6-3
- interface atm command 6-18
- interfaces
- configuring for SSG 4-14
- example 4-63
- verifying for SSG 4-14
- interface virtual-template command 2-3, 5-2
- Internet Group Management Protocol
- see IGMP
- IOS NAT
- example 4-66
- IP
- routing
- (examples) 6-2
- configuring 6-1
- ip cef command 2-1, 4-17
- IPCP subnet mask
- configuring support on CPE 6-11
- CBOS 6-12
- IOS 6-12
- overview 6-9
- troubleshooting 6-13
- verifying support on CPE 6-13
- ip dhcp-server command 5-2
- IP hint 4-6
- ip local pool command 5-2
- IP MTU
- setting 5-6
- ip nat command 4-18
- IP OAP
- configuring local pool group 6-14
- IP QoS and PPP call rate 6-2
- ip radius source-interface command 6-8
- ip unnumbered command 5-2
- ip unnumbered ethernet command 2-3
- keepalive command 6-6
- keepalive interval
- definition 6-5
- interface
- configuring 6-6
- default 6-5
- verifying 6-6
- L2TP tunnel
- configuring 6-7
- default 6-5
- verifying 6-7
- L2F 2-1
- L2TP
- configuring 2-2
- configuring LNS 4-21
- configuring SSG with L2TP Service Type 4-19
- monitoring 2-20, 4-23
- overview 2-1
- restrictions 2-1
- SSG example 4-21
- SSG prerequisites 4-11
- troubleshooting 2-20
- L2TP access concentrator
- see LAC
- L2TP control channel parameters 6-8
- L2TP network server
- see LNS
- L2TP scalability
- prerequisites 2-1
- restrictions 2-1
- L2TP scalability configuration example 6-10
- l2tp tunnel hello command 6-7
- l2tp tunnel nosession-timeout command 6-10
- L2TP Tunnel Password attribute 4-40, 4-47
- l2tp tunnel receive-window command 6-9
- l2tp tunnel retransmit command 6-8
- L2TP tunnel service authorization
- example 2-7
- restrictions 2-1
- L2TP tunnel switching
- example 2-18
- overview 2-14
- restrictions 2-1
- L2TP tunnel timeout
- configuring 6-10
- defaults 6-10
- verifying 6-10
- label switch router
- see MPLS edge LSR
- LAC
- configuring NRP as 4-19
- configuring sessions per tunnel limiting on 2-9
- configuring to communicate with RADIUS server 2-5
- configuring VPDN on 2-2
- Layer 2 service
- selection 4-12
- Layer 2 tunnel protocol
- see L2TP
- Layer 3 service
- selection 4-11
- prerequisites 4-11
- LCP
- definition 6-3
- session initiations
- limiting simultaneous 6-4
- overview 6-3
- verifying limits 6-4
- lcp max-load-metric command 6-4
- lcp max-session-starts command 6-4
- LDAP 4-1, 4-4
- Lightweight Directory Access Protocol
- see LDAP
- Link Control Protocol
- See LCP
- LNS
- configuring
- SSG 4-21
- configuring VPDN on 2-3
- local authentication 5-14
- local control channel receive window size
- configuring 6-9
- verifying 6-9
- local forwarding
- configuring 4-23
- example 4-23
- verifying 4-23
- local pool groups
- configuring for IP OAP 6-14
- verifying 6-15
- local-profile command 4-12
- local service profiles
- configuring 4-12
- example 4-65
- verifying 4-12
- maintaining
- PPP autosense (table) 5-13
- PPPoE 5-9
- RADIUS VC logging 6-9
- mapping ingress tunnel name to LNS 2-17
- max services
- example 4-65
- memory, recommended
- L2TP scalability 2-2
- monitoring
- host key 4-31
- L2TP 4-23
- PPP autosense (table) 5-13
- PPPoE 5-9
- RADIUS VC logging 6-9
- SSG 4-67
- VPDN and L2TP 2-20
- VPI/VCI indexing to service profile 4-19
- monitoring, maintaining commands
- VPDN (table) 2-21
- MPLS
- configuring 3-2
- configuring VPNs 3-7
- prerequisites 3-1
- restrictions 3-1
- MPLS edge LSRs
- configuring NRPs as
- connecting through PVP 3-3
- connecting through VPI range 3-5
- MTU Size Attribute 4-20, 4-41, 4-47
- multicast
- benefits 4-5
- configuring for SSG 4-16
- example 4-65
- verifying for SSG 4-16
- multihop
- enabling 2-16
- multiprotocol label switching
- see MPLS
- NAT 4-6
- configuring 4-17
- proxy service 4-5
- verifying 4-18
- Network Address Translation
- see NAT
- network management ethernet
- see NME
- next hop gateway 4-42, 4-48
- Next Hop Gateway attribute 4-7, 4-42, 4-48
- Next Hop Gateway pseudo-service profile 4-61
- Next Hop Gateway Table Entry attribute 4-42, 4-61
- next hop key 4-42, 4-48, 4-54, 4-61
- next-hop table
- example 4-64
- NME interface IP address
- configuring on NSP 6-6
- verifying 6-7
- non-PPP network 4-7
- non-PPP user 4-4
- NRP
- authentication 5-13
- local 5-14
- RADIUS 5-14
- TACACS+ 5-15
- OAM enhancements 6-15
- OAM management
- enabling 6-18
- oam-pvc command 6-18
- OAP
- benefits 6-14
- example 6-14
- overview 6-13
- restrictions 6-14
- verifying local pool groups 6-15
- objectives, document xiii
- Octets Input attribute 4-38
- Octets Output attribute 4-38
- open garden
- configuring 4-24
- restrictions 4-10
- outacl attribute 4-6, 4-40, 4-43, 4-47, 4-48, 4-59
- output hold-queue limit
- configuring 6-3
- default 6-2
- description 6-2
- verifying 6-3
- overlapping address pools
- see OAP
- passthrough service 4-5, 4-20, 4-42, 4-48, 4-55
- Password attribute 4-43, 4-48, 4-57
- peer default ip address pool command 5-2
- Point-to-Point Protocol
- see PPP
- port-bundle length
- specifying 4-30
- PPP
- AAA authentication
- configuring 5-3, 5-13
- configuring 5-1
- configuring RADIUS server 5-14
- configuring TACACS+ server 5-15
- connect to SSG 4-14
- prerequisites 5-1
- restrictions 5-1
- specifying default authentication method 4-13
- ppp authentication command 2-3, 5-2
- PPP autosense
- configuring 5-9
- example 5-10
- monitoring and maintaining (table) 5-13
- troubleshooting 5-13
- verifying 5-10
- PPPcall rate and IP QoS 6-2
- PPPoA
- (example) 5-4
- configuring 5-2
- configuring PVCs 5-3
- restrictions 5-1
- troubleshooting 5-4
- verifying 5-4
- virtual template 5-2
- PPPoE
- configuring 5-5
- configuring on ATM interface 5-6
- example 5-7
- monitoring and maintaining 5-9
- restrictions 5-1
- troubleshooting 5-9
- verifying 5-6
- pppoe limit max-sessions command 5-16
- pppoe limit per-mac command 5-16
- pppoe limit per-vc command 5-16
- pppoe limit per-vlan command 5-16
- pppoe max-sessions command 5-16
- PPPoE session count MIB
- configuring 5-19
- objects and tables (table) 5-20
- PPPoE session limit
- configuring 5-15
- PPP Termination Aggregation
- see PTA
- ppp timeout authentication command 6-5
- ppp timeout retry command 6-5
- PPP timeouts
- authentication
- default 6-4
- overview 6-4
- configuring 6-5
- retry
- default 6-4
- overview 6-4
- verifying 6-5
- PPP virtual template
- configuring 5-2
- PPTP 2-1
- precloning virtual access interfaces
- configuring 6-7
- overview 6-7
- restrictions 6-2
- verifying 6-8
- prerequisites
- L2TP for SSG 4-11
- L2TP scalability 2-1
- Layer 3 service selection 4-11
- MPLS 3-1
- PPP 5-1
- SSG 4-11
- proxy RADIUS enhancements
- configuring 4-33
- example 4-33
- restrictions 4-10
- verifying 4-34
- proxy service 4-5, 4-20, 4-42, 4-44, 4-48, 4-52, 4-55
- pseudo-service profile 4-6
- Next Hop Gateway 4-61
- Transparent Passthrough Filter 4-59, 4-60
- pseudo-service profiles
- configuring 4-59
- PTA 4-6
- PTA-MD 4-6
- PTA multi-domain
- see PTA-MD
- RADIUS
- accounting records 4-34
- Account Logoff 4-35, 4-66
- Account Logon 4-35
- attributes 4-37
- Connection Start 4-36
- Connection Stop 4-36, 4-66
- attributes
- Account-Info 4-40, 4-43, 4-57
- Auto Service 4-41, 4-43, 4-44
- Cisco-AVPair 4-6, 4-40, 4-43, 4-47
- Control-Info 4-42
- DNS Server Address 4-41, 4-47, 4-50
- Domain Name 4-7, 4-41, 4-47, 4-53
- Full Username Attribute 4-33, 4-47, 4-51
- Group Description 4-41, 4-57
- Idle-Timeout 4-4, 4-7, 4-43, 4-48
- MTU Size Attribute 4-20, 4-41, 4-47
- Next Hop Gateway 4-42, 4-48
- Next Hop Gateway Table Entry 4-61
- Octets Input 4-38
- Octets Output 4-38
- Password 4-43, 4-48, 4-57
- RADIUS Server 4-6, 4-32, 4-42, 4-47, 4-52
- Service Authentication Type 4-47
- Service-Defined Cookie 4-33, 4-47, 4-53
- Service Description 4-42, 4-47, 4-53
- Service Group 4-41, 4-43, 4-45, 4-57
- Service-Info 4-41, 4-47
- Service Mode 4-42, 4-47, 4-54
- Service Name 4-37, 4-41, 4-42, 4-43, 4-44, 4-57, 4-58
- Service Next Hop Gateway 4-54
- Service Route 4-6, 4-42, 4-48, 4-54
- Service-Type 4-48, 4-57
- Service User attribute 4-37
- Session-Timeout 4-4, 4-7, 4-43, 4-48
- Standard 4-43, 4-48, 4-57
- Type of Service 4-42, 4-48, 4-55
- configuring NRP to use 5-14
- transparent passthrough 4-5, 4-6
- troubleshooting 4-68
- RADIUS Attribute 4
- global configuration commands and selected IP addresses (table) 6-9
- selecting IP address for 6-8
- RADIUS Attribute 8 4-6
- RADIUS interim accounting
- configuring for SSG 4-16
- example 4-66
- verifying for SSG 4-17
- RADIUS profiles
- configuring for SSG 4-39
- configuring for SSG L2TP 4-19
- RADIUS server
- communicating with LAC 2-5
- configuring for PPP 5-14
- RADIUS Server attribute 4-6, 4-32, 4-42, 4-47, 4-52
- radius-server attribute 4 nrp command 6-8
- radius-server attribute nas-port command 5-14
- radius-server command 2-5, 4-13
- radius-server host command 5-14
- radius-server key command 5-14
- RADIUS VC logging 6-6
- configuring 6-6
- configuring on NRP 6-7
- monitoring and maintaining 6-9
- verifying 6-8
- RBE for CEF 6-5
- receive window size
- configuring 6-9
- verifying 6-9
- redundancy
- example 4-65
- SSG 4-8
- Remote Access Dial-In User Service
- see RADIUS
- request dialin command 2-2
- restrictions
- ATM RBE 6-4
- CEF 4-10
- L2TP
- scalability 2-1
- tunnel service authorization 2-1
- tunnel switching 2-1
- MPLS 3-1
- OAP 6-14
- open garden 4-10
- PPPoA 5-1
- PPPoE 5-1
- proxy RADIUS enhancements 4-10
- single host login 4-11
- SSG 4-10
- VPI/VCI indexing to service profile 4-10
- RFC 1483 encapsulation
- bridging 6-2
- IP routing 6-3
- routed bridge encapsulation
- see RBE
- routing
- (examples) 6-2
- configuring 6-1
- IP example 6-3
- RWS
- configuring 6-9
- verifying 6-9
- security
- configuring 4-13
- example 4-63
- verifying 4-13
- selecting
- IP Address for RADIUS Attribute 4 6-8
- sequential access 4-42, 4-46, 4-47, 4-54
- sequential service access mode 4-7
- service access mode 4-7
- service access order 4-6
- Service Authentication Type attribute 4-47
- Service-Defined Cookie attribute 4-33, 4-42, 4-47, 4-53
- Service Description attribute 4-42, 4-47, 4-53
- Service Group attribute 4-41, 4-43, 4-45, 4-57
- service group profiles
- Account-Info attributes 4-57
- configuring 4-56
- example 4-58
- Standard attributes 4-57
- Service-Info attributes 4-41
- service profiles 4-47
- Service Mode attribute 4-42, 4-47, 4-54
- Service Name attribute 4-37, 4-41, 4-42, 4-43, 4-44, 4-57, 4-58
- Service Next Hop Gateway attribute 4-54
- service profiles
- attributes 4-46
- Cisco-AVPair attributes 4-47
- configuring 4-46
- example 4-56
- Service-Info attributes 4-47
- Standard attributes 4-48
- Service Route attribute 4-42, 4-48, 4-54
- services
- configuring for SSG 4-15
- example 4-64
- verifying for SSG 4-15
- service search order
- example 4-64
- Service Selection Gateway
- see SSG
- Service-Type attribute 4-48, 4-57
- Service User attribute 4-37, 4-42
- sessions per tunnel limiting 2-9
- configuring LAC 2-9
- configuring RADIUS profile 2-10
- example 2-9
- RADIUS service profile
- example 2-11
- Session-Timeout attribute 4-7, 4-43, 4-48
- setting
- IP MTU 5-6
- shared secret 4-13
- show atm pvc ppp command 5-4
- show interface virtual-access command 5-4
- show ip cef command 4-17
- show ip nat translations command 4-18
- show running-config command 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19
- show ssg binding command 4-67
- show ssg connection command 4-67
- show ssg direction command 4-14, 4-67
- show ssg host command 4-67
- show ssg next-hop command 4-15, 4-67
- show ssg pass-through-filter command 4-67
- show ssg service command 4-15, 4-67
- show ssg vc-service-map command 4-19
- show vpdn tunnel all
- new field descriptions (table) 2-20
- show vpdn tunnel all command 2-20, 6-9, 6-12
- show vtemplate command 6-8
- Simple Network Management Protocol
- see SNMP
- single host login 4-11
- restrictions 4-11
- SNMP 4-3, 4-5
- SSG
- Account-Info attributes 4-40
- benefits 4-4
- CEF
- configuring 4-17
- verifying 4-17
- Cisco-AVPair attributes 4-40
- configuration example 4-62
- CEF 4-66
- default network 4-63
- fastswitching 4-65
- interfaces 4-63
- IOS NAT 4-66
- local service profile 4-65
- max services 4-65
- multicast 4-65
- next-hop table 4-64
- RADIUS interim accounting 4-66
- redundancy 4-65
- security 4-63
- services 4-64
- service search order 4-64
- transparent passthrough filter 4-65
- configuring features 4-11
- Control-Info attributes 4-42
- default network
- configuring 4-13
- verifying 4-14
- enabling 4-12
- fastswitching
- configuring 4-15
- verifying 4-16
- interfaces
- configuring 4-14
- verifying 4-14
- L2TP
- configuring RADIUS profiles 4-19
- example 4-21
- monitoring 4-23
- local forwarding
- configuring 4-23
- example 4-23
- verifying 4-23
- monitoring and troubleshooting 4-67
- multicast
- configuring 4-16
- verifying 4-16
- NAT
- configuring 4-17
- verifying 4-18
- NRP DRAM required for L2TP 4-11
- open garden
- configuring 4-24
- overview 4-1
- prerequisites 4-11
- proxy RADIUS enhancements
- configuring 4-33
- example 4-33
- verifying 4-34
- pseudo-service profiles
- configuring 4-59
- RADIUS
- troubleshooting 4-68
- RADIUS interim accounting
- configuring 4-16
- verifying 4-17
- RADIUS profiles
- configuring 4-39
- redundancy 4-8
- restrictions 4-10
- security
- configuring 4-13
- verifying 4-13
- service group profiles
- configuring 4-56
- service profiles
- configuring 4-46
- services
- configuring 4-15
- verifying 4-15
- single host login 4-11
- TCP Redirect - Logon
- configuring 4-26
- verifying 4-27
- user profiles
- configuring 4-42
- VPI/VCI indexing to service profile
- configuring 4-18
- monitoring 4-19
- verifying 4-19
- VSAs 4-40
- web selection 4-4
- with L2TP Service Type 4-19
- ssg accounting interval command 4-17
- ssg bind direction command 4-14
- ssg bind service command 4-15
- ssg default-network command 4-13
- ssg fastswitch command 4-15
- ssg maxservice command 4-15
- ssg multicast command 4-16
- ssg next-hop command 4-67
- ssg next-hop download command 4-15
- ssg pass-through command 4-67
- ssg radius-helper command 4-13
- ssg service-password command 4-13
- ssg service-search-order command 4-15
- ssg vc-service-map command 4-18
- Standard attributes
- service group profiles 4-57
- service profiles 4-48
- user profiles 4-43
- static domain name
- configuring 2-4
- PVC example 2-7
- VC class example 2-7
- verifying 2-5
- sticky IP 4-6
- subnet mask
- configuring 6-9
- on NRP 6-10
- RADIUS user profile 6-10
- verifying
- on NRP 6-11
- RADIUS User Profile 6-10
- TACACS+ 4-5, 5-15
- TACACS+ server
- configuring for PPP 5-15
- tacacs-server host command 5-15
- tacacs-server key command 5-15
- TCP Redirect - Logon
- configuring 4-26
- verifying 4-27
- technical assistance xvi
- terminating tunnel from LAC 2-16
- Transmission Control Protocol/Internet Protocol (TCP/IP) 4-7
- transparent passthrough 4-5, 4-6, 4-59
- transparent passthrough filter
- example 4-65
- Transparent Passthrough Filter pseudo-service profile 4-59, 4-60
- Cisco-AVPair attributes 4-59
- troubleshooting
- host key 4-31
- IPCP subnet mask 6-13
- PPP autosense 5-13
- PPPoA 5-4
- PPPoE 5-9
- SSG 4-67
- RADIUS 4-68
- VPDN and L2TP 2-20
- troubleshooting commands
- VPDN (table) 2-21
- tunnel service authorization
- configuring RADIUS profile 2-6
- enhancements 2-4
- LAC example 2-8
- RADIUS service profile 2-6
- example 2-8
- Tunnel Share attribute 2-13
- tunnel sharing 2-12
- configuring LAC 2-12
- configuring RADIUS profile 2-13
- Type of Service attribute 4-42, 4-48, 4-55
- uplink interface 4-5, 4-14
- binding services to 4-15
- upstream ACL attribute 4-40, 4-43, 4-47, 4-59
- user profiles
- Account-Info attributes 4-43
- attributes 4-42
- Cisco-AVPair attributes 4-43
- configuring 4-42
- example 4-46
- Standard attributes 4-43
- vendor-specific attributes
- see VSAs
- verifying
- AAA server group support for proxy services 4-33
- ATM RBE 6-5
- CEF 4-17
- default network 4-14
- fastswitching 4-16
- host key 4-31
- local forwarding 4-23
- local pool groups for IP OAP 6-15
- local service profiles 4-12
- NAT 4-18
- NME interface IP address 6-7
- PPP autosense 5-10
- PPPoA 5-4
- PPPoE 5-6
- proxy RADIUS enhancements 4-34
- security 4-13
- SSG enabled 4-12
- SSG interfaces 4-14
- SSG multicast 4-16
- SSG RADIUS interim accounting 4-17
- SSG services 4-15
- TCP Redirect - Logon 4-27
- VPI/VCI indexing to service profile 4-19
- virtual access interfaces 2-3
- virtual access interfaces, precloning
- configuring 6-7
- overview 6-7
- restrictions 6-2
- verifying 6-8
- virtual circuits
- see VCs
- virtual private dial-up network
- see VPDN
- virtual template interface 2-3
- virtual-template pre-clone command 6-7
- virtual templates 5-2
- configuring for PPPoE 5-5
- static IP assignment (caution) 5-2
- VPDN 2-2
- enabling 2-16
- monitoring 2-20
- monitoring, maintaining commands (table) 2-21
- troubleshooting commands (table) 2-21
- vpdn enable command 2-2, 2-16
- VPDN Group attribute 2-13
- vpdn group command 2-2
- VPDN IP Address attribute 4-40, 4-47
- VPDN IP Addresses attribute 2-10
- VPDN IP Address Limits attribute 2-11
- vpdn multihop command 2-16
- VPDN tunnel authorization searches by ingress tunnel name 2-17
- VPDN Tunnel ID attribute 4-40, 4-47
- VPI/VCI indexing to service profile
- configuring 4-18
- monitoring 4-19
- restrictions 4-10
- verifying 4-19
- VSAs 4-5, 4-13
- SSG 4-40
- SSG (table) 4-40
- web selection 4-4
Posted: Tue Feb 26 14:23:34 PST 2002
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.