Table Of Contents
Preface
Document Change History
Objectives
Organization
Related Documentation
Cisco 12000 Series Router Documentation
Cisco IOS Software Publications
Document Conventions
Obtaining Documentation
Obtaining Documentation
Cisco.com
Product Documentation DVD
Ordering Documentation
Documentation Feedback
Cisco Product Security Overview
Reporting Security Problems in Cisco Products
Obtaining Technical Assistance
Cisco Technical Support & Documentation Website
Submitting a Service Request
Definitions of Service Request Severity
Obtaining Additional Publications and Information
Preface
This preface describes the objectives and organization of this document and explains how to find additional information on related products and services. This preface contains the following sections:
•
Document Change History
• Objectives
• Organization
• Related Documentation
• Document Conventions
• Obtaining Documentation
Document Change History
Table 1 provides a list of the changes to this document.
Table 1 Document Change History Table
Release No.
|
Revision
|
Date
|
Change Summary
|
12.0(31)S
|
Release 12.0(31)S
|
April 26, 2005
|
Initial release and 1st publication. Provides Cisco IOS commands and configuration procedures for the following SPAs installed in a Cisco 12000 SIP-400 or a Cisco 12000 SIP-600:
•1-Port 10-Gigabit Ethernet SPA
•5-Port 10 Gigabit Ethernet SPA
•10-Port Gigabit Ethernet SPA
•2-Port and 4-Port Clear Channel T3/E3 SPA
•2-Port and 4-Port Channelized T3 SPA
•1-Port OC-192c/STM-64 POS/RPR SPA
|
12.0(31)S2
|
Release 12.0(31)S2
|
September 22, 2005
|
Support for the following hardware by the Cisco 12000 SIP-600 was introduced on the Cisco 12000 series router:
•2-Port OC-48c/STM-16 POS SPA
|
12.0(32)S
|
Release 12.0(32)S
|
January 20, 2006
|
Support for the following SPA interface processor (SIP) hardware was introduced on the Cisco 12000 series routers:
•Cisco 12000 SIP-401
•Cisco 12000 SIP-501
•Cisco 12000 SIP-601
Support for the following SPAs with the SIP 401/501/601 was introduced on Cisco 12000 series routers:
•1-Port 10-Gigabit Ethernet SPA
•8-Port FastEthernet SPA
•10-Port Gigabit Ethernet SPA
Support for the following hardware by the Cisco 12000 SIP-601 was introduced on the Cisco 12000 series router:
•1-Port OC-192c/STM-64 POS/RPR SPA
•1-Port OC-192c/STM-64 POS/RPR XFP SPA
Support for the following hardware by the Cisco 12000 SIP-501 and Cisco 12000 SIP-601 was introduced on the Cisco 12000 series router:
•2-Port OC-48c/STM-16 POS SPA
|
12.0(32)SY
|
Release 12.0(32)SY
|
June 26, 2006
|
Support for the following hardware by the Cisco 12000 SIP-401, Cisco 12000 SIP-501 and Cisco 12000 SIP-601 was introduced on the Cisco 12000 series router:
•8-Port Fast Ethernet SPA (SPA-8X1FE-TX-V2)
•1-Port 10-Gigabit Ethernet SPA (SPA-1X10GE-L-V2)
•2-Port Gigabit Ethernet SPA (SPA-2X1GE-V2)
•5-Port Gigabit Ethernet SPA (SPA-5x1GE-V2)
•10-Port Gigabit Ethernet SPA (SPA-10X1GE-V2)
•2-Port OC-3c/STM-1 and OC-12c/STM-4 POS SPA
•4-Port OC-3c/STM-1 and OC-12c/STM-4 POS SPA
•8-Port OC-3c/STM-1 and OC-12c/STM-4 POS SPA
•4-Port OC-3c/STM-1 POS SPA
•8-Port OC-3c/STM-1 POS SPA
|
Objectives
This document describes the configuration and troubleshooting of SPA interface processors (SIPs) and shared port adapters (SPAs) that are supported on a Cisco 12000 Series Router.
Organization
This document contains the following chapters:
Chapter
|
Title
|
Description
|
Part 1
|
Shared Port Adapters
|
Covers IOS Software and SIP and SPA overview.
|
Chapter 1
|
Using Cisco IOS Software
|
Provides an introduction to accessing the command-line interface (CLI) and using the Cisco IOS Software and related tools.
|
Chapter 2
|
SIP and SPA Product Overview
|
Provides an introduction to modular services cards (SIPs) and shared port adapters (SPAs).
|
Chapter 3
|
Overview of the Cisco 12000 Series Router SIPs
|
Provides an overview of the release history, and feature and Management Information Base (MIB) support for the SIPs supported on the Cisco 12000 Series Routers.
|
Part 2
|
Gigabit Ethernet Shared Port Adapters
|
Covers Gigabit Ethernet SPA Configuration.
|
Chapter 4
|
Overview of the Gigabit Ethernet SPAs
|
Provides an overview of the release history, and feature and Management Information Base (MIB) support for the Gigabit Ethernet SPAs on the Cisco 12000 series router.
|
Chapter 5
|
Configuring the Fast Ethernet and Gigabit Ethernet SPAs
|
Describes how to configure the Gigabit Ethernet SPAs on the Cisco 12000 Series Router.
|
Chapter 6
|
Troubleshooting the Gigabit Ethernet SPA
|
This chapter describes techniques that you can use to troubleshoot the operation of your GigabitEthernet SPAs.
|
Chapter 7
|
Command Summary for Gigabit Ethernet SPAs
|
Provides an alphabetical list of the most significant commands that are needed to configure, monitor, and maintain the Fast Ethernet and Gigabit Ethernet shared port adapter (SPA) cards.
|
Part 3
|
Serial Shared Port Adapters
|
Covers Serial SPAs.
|
Chapter 8
|
Overview of the Serial SPAs
|
Provides an overview of the release history, features, and MIBs for the 2 and 4-Port T3/E3 SPA and the 2 or 4-Port CT3 SPA.
|
Chapter 9
|
Configuring the 2-Port and 4-Port Channelized T3 SPA
|
Provides information about configuring the 2-Port and 4-Port Channelized T3 Shared Port Adapters (SPAs) on the Cisco 12000 series routers.
|
Chapter 10
|
Configuring the 2-Port and 4-Port T3/E3 SPAs
|
Provides information about configuring the 2-Port and 4-Port T3/E3 Shared Port Adapters (SPAs) on the Cisco 12000 Series routers.
|
Chapter 13
|
Command Summary for Serial SPAs
|
Provides an alphabetical list of some of the related commands to configure, monitor, and maintain Serial SPAs.
|
Part 4
|
Packet over SONET Shared Port Adapters
|
Covers POS SPAs.
|
Chapter 14
|
Chapter 14, "Overview of the POS SPAs"
|
Provides an overview of the release history, and feature and Management Information Base (MIB) support for the Packet over SONET (POS) SPAs on the Cisco 12000 Series Router.
|
Chapter 15
|
Configuring the POS SPAs
|
Provides information about configuring the Packet over SONET (POS) SPAs on the Cisco 12000 SIP-600 series routers.
|
Chapter 16
|
Command Summary for the POS SPAs
|
Provides an alphabetical list of some of the related commands to configure, monitor, and maintain POS SPAs.
|
Part 5
|
Field-Programmable Devices
|
Covers FPDs.
|
Chapter 17
|
Upgrading Field-Programmable Devices
|
Provides information about upgrading the Field-Programmable Gate Array (FPGA) on the Cisco 12000 Series Router.
|
Chapter 18
|
Command Summary for FPDs
|
Provides an alphabetical list of some of the related commands to configure, monitor, and upgrade FPD images for SPAs on the Cisco 12000 Series Router.
|
Chapter 19
|
SIP and SPA Command Reference
|
Describes Cisco IOS software command reference information including syntax, usage guidelines, and examples for all new and modified commands for SPAs on a Cisco 12000 Series Router.
|
Related Documentation
This section refers you to other documentation that also might be useful as you configure your Cisco 12000 Series Router. The documentation listed below is available online.
•Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
•Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide
•Cisco IOS Release Release Notes for Cisco 12000 Series Routers
•Regulatory Compliance and Safety Information for Cisco 12000 Series Routerss
Cisco 12000 Series Router Documentation
As you configure SIPs and SPAs on your Cisco 12000 Series Router, you should also refer to the following companion publication for important hardware installation information:
•Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
Some of the other Cisco 12000 Series Router publications might be useful to you as you configure your Cisco 12000 Series Router. The following URL provides a wide range of documentation for the various Cisco 12000 Series Routers and their accompanying field replaceable units (FRUs):
http://www.cisco.com/univercd/cc/td/doc/product/core/cis12000/
Several other publications are also related to the Cisco 12000 Series Router. For a complete reference of related documentation, refer to the various roadmap documents located at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/core/cis12000/roadmap/
Cisco IOS Software Publications
Your router, switch, or gateway and the Cisco IOS software running on it contain extensive features. You can find documentation for Cisco IOS software features at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/
Cisco IOS Release 12.0 S Software Publications
Documentation for Cisco IOS Release 12.0 S, including release notes and system error messages, can be found at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/
Document Conventions
Within the SIP and SPA software configuration guides, the term router is generally used to refer to a variety of Cisco products (for example, routers, access servers, and switches). Routers, access servers, and other networking devices that support Cisco IOS software are shown interchangeably within examples. These products are used only for illustrative purposes; that is, an example that shows one product does not necessarily indicate that other products are not supported.
This documentation uses the following conventions:
Convention
|
Description
|
^ or Ctrl
|
The ^ and Ctrl symbols represent the Control key. For example, the key combination ^D or Ctrl-D means hold down the Control key while you press the D key. Keys are indicated in capital letters but are not case sensitive.
|
string
|
A string is a nonquoted set of characters shown in italics. For example, when setting an SNMP community string to public, do not use quotation marks around the string or the string will include the quotation marks.
|
Command syntax descriptions use the following conventions:
Convention
|
Description
|
bold
|
Bold text indicates commands and keywords that you enter literally as shown.
|
italics
|
Italic text indicates arguments for which you supply values.
|
[x]
|
Square brackets enclose an optional element (keyword or argument).
|
|
|
A vertical line indicates a choice within an optional or required set of keywords or arguments.
|
[x | y]
|
Square brackets enclosing keywords or arguments separated by a vertical line indicate an optional choice.
|
{x | y}
|
Braces enclosing keywords or arguments separated by a vertical line indicate a required choice.
|
Nested sets of square brackets or braces indicate optional or required choices within optional or required elements. For example:
Convention
|
Description
|
[x {y | z}]
|
Braces and a vertical line within square brackets indicate a required choice within an optional element.
|
Examples use the following conventions:
Convention
|
Description
|
screen
|
Examples of information displayed on the screen are set in Courier font.
|
bold screen
|
Examples of text that you must enter are set in Courier bold font.
|
< >
|
Angle brackets enclose text that is not printed to the screen, such as passwords.
|
!
|
An exclamation point at the beginning of a line indicates a comment line. (Exclamation points are also displayed by the Cisco IOS software for certain processes.)
|
[ ]
|
Square brackets enclose default responses to system prompts.
|
The following conventions are used to attract the attention of the reader:
Caution Means
reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.
Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this manual.
Obtaining Documentation
Obtaining Documentation
Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems.
Cisco.com
You can access the most current Cisco documentation at this URL:
http://www.cisco.com/techsupport
You can access the Cisco website at this URL:
http://www.cisco.com
You can access international Cisco websites at this URL:
http://www.cisco.com/public/countries_languages.shtml
Product Documentation DVD
Cisco documentation and additional literature are available in the Product Documentation DVD package, which may have shipped with your product. The Product Documentation DVD is updated regularly and may be more current than printed documentation.
The Product Documentation DVD is a comprehensive library of technical product documentation on portable media. The DVD enables you to access multiple versions of hardware and software installation, configuration, and command guides for Cisco products and to view technical documentation in HTML. With the DVD, you have access to the same documentation that is found on the Cisco website without being connected to the Internet. Certain products also have .pdf versions of the documentation available.
The Product Documentation DVD is available as a single unit or as a subscription. Registered Cisco.com users (Cisco direct customers) can order a Product Documentation DVD (product number DOC-DOCDVD=) from the Ordering tool or Cisco Marketplace.
Cisco Ordering tool:
http://www.cisco.com/en/US/partner/ordering/
Cisco Marketplace:
http://www.cisco.com/go/marketplace/
Ordering Documentation
Beginning June 30, 2005, registered Cisco.com users may order Cisco documentation at the Product Documentation Store in the Cisco Marketplace at this URL:
http://www.cisco.com/go/marketplace/
Cisco will continue to support documentation orders using the Ordering tool:
•Registered Cisco.com users (Cisco direct customers) can order documentation from the Ordering tool:
http://www.cisco.com/en/US/partner/ordering/
•Instructions for ordering documentation using the Ordering tool are at this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm
•Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems Corporate Headquarters (California, USA) at 408 526-7208 or, elsewhere in North America, by calling 1 800 553-NETS (6387).
Documentation Feedback
You can rate and provide feedback about Cisco technical documents by completing the online feedback form that appears with the technical documents on Cisco.com.
You can send comments about Cisco documentation to bug-doc@cisco.com.
You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address:
Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883
We appreciate your comments.
Cisco Product Security Overview
Cisco provides a free online Security Vulnerability Policy portal at this URL:
http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html
From this site, you can perform these tasks:
•Report security vulnerabilities in Cisco products.
•Obtain assistance with security incidents that involve Cisco products.
•Register to receive security information from Cisco.
A current list of security advisories and notices for Cisco products is available at this URL:
http://www.cisco.com/go/psirt
If you prefer to see advisories and notices as they are updated in real time, you can access a Product Security Incident Response Team Really Simple Syndication (PSIRT RSS) feed from this URL:
http://www.cisco.com/en/US/products/products_psirt_rss_feed.html
Reporting Security Problems in Cisco Products
Cisco is committed to delivering secure products. We test our products internally before we release them, and we strive to correct all vulnerabilities quickly. If you think that you might have identified a vulnerability in a Cisco product, contact PSIRT:
•Emergencies — security-alert@cisco.com
An emergency is either a condition in which a system is under active attack or a condition for which a severe and urgent security vulnerability should be reported. All other conditions are considered nonemergencies.
•Nonemergencies — psirt@cisco.com
In an emergency, you can also reach PSIRT by telephone:
•1 877 228-7302
•1 408 525-6532
Tip We encourage you to use Pretty Good Privacy (PGP) or a compatible product to encrypt any sensitive information that you send to Cisco. PSIRT can work from encrypted information that is compatible with PGP versions 2.x through 8.x.
Never use a revoked or an expired encryption key. The correct public key to use in your correspondence with PSIRT is the one linked in the Contact Summary section of the Security Vulnerability Policy page at this URL:
http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html
The link on this page has the current PGP key ID in use.
Obtaining Technical Assistance
Cisco Technical Support provides 24-hour-a-day award-winning technical assistance. The Cisco Technical Support & Documentation website on Cisco.com features extensive online support resources. In addition, if you have a valid Cisco service contract, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not have a valid Cisco service contract, contact your reseller.
Cisco Technical Support & Documentation Website
The Cisco Technical Support & Documentation website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The website is available 24 hours a day, at this URL:
http://www.cisco.com/techsupport
Access to all tools on the Cisco Technical Support & Documentation website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a user ID or password, you can register at this URL:
http://tools.cisco.com/RPF/register/register.do
Note Use the Cisco Product Identification (CPI) tool to locate your product serial number before submitting a web or phone request for service. You can access the CPI tool from the Cisco Technical Support & Documentation website by clicking the Tools & Resources link under Documentation & Tools. Choose Cisco Product Identification Tool from the Alphabetical Index drop-down list, or click the Cisco Product Identification Tool link under Alerts & RMAs. The CPI tool offers three search options: by product ID or model name; by tree view; or for certain products, by copying and pasting show command output. Search results show an illustration of your product with the serial number label location highlighted. Locate the serial number label on your product and record the information before placing a service call.
Submitting a Service Request
Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and S4 service requests are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Service Request Tool provides recommended solutions. If your issue is not resolved using the recommended resources, your service request is assigned to a Cisco engineer. The TAC Service Request Tool is located at this URL:
http://www.cisco.com/techsupport/servicerequest
For S1 or S2 service requests or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.
To open a service request by telephone, use one of the following numbers:
Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553-2447
For a complete list of Cisco TAC contacts, go to this URL:
http://www.cisco.com/techsupport/contacts
Definitions of Service Request Severity
To ensure that all service requests are reported in a standard format, Cisco has established severity definitions.
Severity 1 (S1)—Your network is "down," or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.
Severity 2 (S2)—Operation of an existing network is severely degraded, or significant aspects of your business operation are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.
Severity 3 (S3)—Operational performance of your network is impaired, but most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.
Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.
Obtaining Additional Publications and Information
Information about Cisco products, technologies, and network solutions is available from various online and printed sources.
•Cisco Marketplace provides a variety of Cisco books, reference guides, documentation, and logo merchandise. Visit Cisco Marketplace, the company store, at this URL:
http://www.cisco.com/go/marketplace/
•Cisco Press publishes a wide range of general networking, training and certification titles. Both new and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press at this URL:
http://www.ciscopress.com
•Packet magazine is the Cisco Systems technical user magazine for maximizing Internet and networking investments. Each quarter, Packet delivers coverage of the latest industry trends, technology breakthroughs, and Cisco products and solutions, as well as network deployment and troubleshooting tips, configuration examples, customer case studies, certification and training information, and links to scores of in-depth online resources. You can access Packet magazine at this URL:
http://www.cisco.com/packet
•iQ Magazine is the quarterly publication from Cisco Systems designed to help growing companies learn how they can use technology to increase revenue, streamline their business, and expand services. The publication identifies the challenges facing these companies and the technologies to help solve them, using real-world case studies and business strategies to help readers make sound technology investment decisions. You can access iQ Magazine at this URL:
http://www.cisco.com/go/iqmagazine
or view the digital edition at this URL:
http://ciscoiq.texterity.com/ciscoiq/sample/
•Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:
http://www.cisco.com/ipj
•Networking products offered by Cisco Systems, as well as customer support services, can be obtained at this URL:
http://www.cisco.com/en/US/products/index.html
•Networking Professionals Connection is an interactive website for networking professionals to share questions, suggestions, and information about networking products and technologies with Cisco experts and other networking professionals. Join a discussion at this URL:
http://www.cisco.com/discuss/networking
•World-class networking training is available from Cisco. You can view current offerings at this URL:
http://www.cisco.com/en/US/learning/index.html
