|
|
Table A-1 provides a detailed description of the CDDI/FDDI SBus single and dual attachment adapter specifications.
| FDDI SBus Adapter | CDDI SBus Adapter | |
|---|---|---|
| Dimensions (H x W x D) | Single attachment adapter: 0.75 x 3.3 x 5.78" (1.9 x 8.4 x 14.6 cm) Dual attachment adapter: | Single attachment adapter: 0.75 x 3.3 x 5.78" (1.9 x 8.4 x 14.6 cm) Dual attachment adapter: |
| Power requirements | +5V @ 1.8A (maximum) +12V @ 30 mA (maximum) | +5 V @ 1.5A (maximum) +12 V @ 30 mA (maximum) |
| Power dissipation | 9.4 watts (W) (maximum)
Single attachment adapter: Dual attachment adapter: | 7.9W (maximum)
Single attachment adapter: Dual attachment adapter: |
| Environmental conditions: | ||
| Operating temperature Storage temperature Relative humidity | 32 to 104°F (0 to 40°C) -40 to 167°F (-40 to 75°C) 10 to 90% (noncondensing) | 32 to 104°F (0 to 40°C) -40 to 167°F (-40 to 75°C) 10 to 90% (noncondensing) |
| EMI certifications | FCC Class B (47 CFR, Part 15) CISPR Class B VDE Class B EN55022 Class B VCCI Class 2 CE Mark | FCC Class A (47 CFR, Part 15) CISPR Class A VDE Class B EN55022 Class A VCCI Class 1 CE Mark |
| Network connector | MIC | RJ-45 |
| Station-to-station cabling | Up to 2 kilometers of either 62.5/125-micron or 50/125-micron multimode fiber | Category 5 UTP: up to 100 meters IBM Type 1 STP: up to 100 meters1 |
| Faceplate indicators | Status, ringop | Status, ringop |
| SBus compliance | SBus A.2 specification | SBus A.2 specification |
|
|