|
Supplement to DOC-WGEISASGIUG1 (Document Number 78-1400-01)
This release note describes the features, modifications, and caveats of the CDDI/FDDI EISA SGI adapter driver software Versions 1.1, 1.0, 1.2, and 1.3. Refer to the Workgroup CDDI/FDDI EISA SGI Adapter User Guide for detailed information about the CDDI/FDDI EISA SGI adapters.
The Copper Distributed Data Interface (CDDI) and Fiber Distributed Data Interface (FDDI) Extended Industry Standard Architecture (EISA) Silicon Graphics, Inc. (SGI) adapters provide a single attachment or dual attachment connection for Indigo2 workstations that is fully compliant with the Station Management (SMT) Specification Revisions 6.2 and 7.3. Refer to the chapter "Product Overview" of the Workgroup CDDI/FDDI EISA SGI Adapter User Guide for a description of product features and functions.
The EISA SGI adapter driver software Version 1.3 provides compatibility with IRIX Versions 5.1, 5.2, 5.3, and 6.1. EISA SGI adapter software Version 1.2 is bundled with Version 1.3 for IRIX Version 6.0.1 compatibility.
In previous versions of the EISA SGI adaper driver software, the fddistat command displayed incorrect time values. This situation has been corrected in EISA SGI adapter software Version 1.3.
There are no new features in EISA SGI adapter driver software Version 1.3.
This section describes the feature incorporated between Version 1.1 and Version 1.2 of the adapter driver software.
The following features have been added to the EISA SGI adapter software Version 1.2:
The default, minimum, and maximum values for these variables will be listed in the file /var/sysgen/mtune/if_cfddi after the user installs the adapter driver. To tune these variables, use the systune command.
This section describes the feature incorporated between Version 1.0 and Version 1.1 of the adapter driver software.
The following feature has been added to the EISA SGI adapter software Version 1.1:
Support has been added for the SGI IRIX Version 5.3 operating system. The installation script automatically checks the target system and determines which version of the operating system is running. The installation script then installs the object module corresponding to the version of the IRIX operating system it detects.
This section describes the features incorporated between the initial release and Version 1.0 of the adapter driver software.
The following new feature was added to the EISA SGI adapter driver software Version 1.0:
Support for SMT 6.2 and 7.3 with turbo EISA SGI adapters. Table 1 shows a matrix of the correct adapter driver software file to be downloaded, depending on your SMT version and adapter card type.
Filename | SMT Version | Adapter Card Type | Product Number |
---|---|---|---|
eisa36.rom | 6.2 | Turbo | WA-C321T, WA-C323T, WA-C326T, WA-C328T |
eisa44.rom | 7.3 | Turbo | WA-C321T, WA-C323T, WA-C326T, WA-C328T |
The appendix "Using the Download Utilities " in the Workgroup CDDI/FDDI EISA Adapter Driver User Guide describes how to use the download_flash utility to update the firmware on the EISA SGI adapter.
|