|
|
This Appendix contains an example of successful logs for installing and uninstalling both server and client.
<CCM2.0-server-hostname># ./install_CCM2.0
Root is installing the CCM2.0 packages
Installation directory is: /tmp/CCM2.0
CSCOcemfm is installed
AV_ROOT=/opt/cemf
Installing the server version of CCM2.0
/tmp has write permission ...
/tmp/CCM2.0 has write permission ...
Checking the OS version ...
SunOS 5.6 installed ...
Checking memory size ...
512 MB of memory installed ...
Checking swap space size ...
WARNING: 1168616 KB of swap space may not be adequate for large-scale deployment with CCM2.0
Checking the disk space
This machine has enough DISK Space to INSTALL CCM2.0
CCM2.0 is not INSTALLED ...so continuing
23409 /opt/cemf/bin/sysmgr
Are you sure you want to install cblMgrm [y] (y/n)? -> Yes chosen
Proceeding with Installation
/opt/cemf/bin/cemf load /tmp/CCM2.0/packages/cblMgrm
** Warning **
** It is strongly advised that you backup your databases
** before running this command.
** This can be achieved using the command "cemf backup"
** Warning **
** This command will stop all sessions connected to this
** machine.
## Script executed
Start of "cblMgrm" Installation
Time stamp Fri Apr 6 17:00:45 PDT 2001
## Finding AV root dir
AV basedir = "/opt/cemf"
## Checking package suitability
Package Ok.
## Installing package
Processing package instance <cblMgrm> from </tmp/CCM2.0/packages>
CableMgr
(sparc) 31
Cisco Systems
## Executing checkinstall script.
Using </opt/cemf> as the package base directory.
## Processing package information.
## Processing system information.
66 package pathnames are already properly installed.
## Verifying disk space requirements.
Installing CableMgr as <cblMgrm>
## Executing preinstall script.
## Installing part 1 of 1.
/opt/cemf/config/C/help/objectFiles/S00generic.types
/opt/cemf/config/C/help/objectFiles/S01alarms.types
/opt/cemf/config/C/help/objectFiles/S01containers.types
.
.
.
/opt/cemf/config/templates/perfPollEM.template1
[ verifying class <none> ]
/opt/cemf/config/configuration/objectSpecifications/S71cblCtrlDataAbstractor
.
.
.
/opt/cemf/config/configuration/objectSpecifications/S71ubrControllerDataRepository
[ verifying class <configospec> ]
/opt/cemf/db/cblCtrl.adb
/opt/cemf/db/perfPollCtrl.adb
/opt/cemf/db/ubrController.adb
[ verifying class <schema> ]
.
.
.
/opt/cemf/bin/ubrMgr
[ verifying class <binary> ]
/opt/cemf/config/dataload/viewSpecifications/x_cblMgr_cblMgr.types
.
.
.
/opt/cemf/config/dataload/viewSpecifications/x_ubrMgr_ubrUbrPAView.types
[ verifying class <viewspec> ]
[ verifying class <processes> ]
[ verifying class <em_config> ]
[ verifying class <partitioning> ]
[ verifying class <mibcontrol> ]
/opt/cemf/config/objectTypes/avmt.types
.
.
.
/opt/cemf/config/objectTypes/z_cblMgrPartialTables
[ verifying class <objecttype> ]
[ verifying class <noreplace> ]
/opt/cemf/config/dataload/clearCorrelationRules/CableAlarmClearCorrelation
/opt/cemf/config/dataload/clearCorrelationRules/OIRAlarmClearCorrelationRules
/opt/cemf/config/dataload/clearCorrelationRules/cblGenericAlarmClearCorrelation
[ verifying class <clearcor> ]
[ verifying class <replace> ]
/opt/cemf/config/dataload/historyCriteria/cblPerfPollCtrlHistoryCriteria
[ verifying class <histcriteria> ]
[ verifying class <objectspec> ]
## Executing postinstall script.
Installation of <cblMgrm> was successful.
Installation Ok.
## Registering package with AccessVision
Registration successful.
## Changing the current runlevel
Saving old runlevel as "100000"
Setting new runlevel as "19999"
## Raising events
events - Running "/opt/cemf/config/selfManagement/actions/l.events configospec"
events - Running "/opt/cemf/config/selfManagement/actions/l.events mibcontrol"
.
.
.
events - Running "/opt/cemf/config/selfManagement/actions/l.events schema"
configospec - Running "/opt/cemf/config/selfManagement/actions/l.configospec"
.
.
.
histcriteria - Running "/opt/cemf/config/selfManagement/actions/l.histcriteria"
em_config - No Action Defined.
noreplace - No Action Defined.
## Resetting runlevel
Setting runlevel to "100000"
## Program Finished
Completed successfully.
application cblMgrm CableMgr
Installed cblMgrm Package
24629 ubrController
24627 perfPollCtrl
24624 cblCtrl
Do you want to load an autodiscovery spec. file [y] (y/n)? -> n
Chose not to load the autodiscovery spec. file
Installing the reporting applications ...
CSCOcemfm is installed
AV_ROOT=/opt/cemf
x ., 0 bytes, 0 tape blocks
x ./Invoker.class, 1049 bytes, 3 tape blocks
.
.
.
x ./Invoker, 257 bytes, 1 tape blocks
root 24844 24788 0 17:17:43 pts/12 0:00 /bin/csh -f ./Invoker
The http server is running
x ., 0 bytes, 0 tape blocks
x ./CMData.class, 557 bytes, 2 tape blocks
.
.
.
x ./PerformanceReport, 595 bytes, 2 tape blocks
Installation of the Reports Completed Successfully
\
Installing CCT
CSCOcemfm is installed
AV_ROOT=/opt/cemf
x ., 0 bytes, 0 tape blocks
x ./mibs, 0 bytes, 0 tape blocks
.
.
.
x ./winjre118/README, 16788 bytes, 33 tape blocks
Installation of CCT Completed Successfully
Installing CiscoView ...
CSCOcemfm is installed
AV_ROOT=/opt/cemf
x cv42-SOL, 0 bytes, 0 tape blocks
.
.
.
x cview-patch/smu.tar, 360448 bytes, 704 tape blocks
Starting Solaris Install...
The following packages are available:
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]:
Processing package instance <CSCOcv> from </tmp/CCM2.0/cv42-SOL>
****************************************************************************
Copyright (c) 1997,1998 by Cisco Systems, Inc.
****************************************************************************
Welcome to CiscoView.
Install started at: Fri Apr 6 17:19:14 PDT 2001
Installing from: /tmp/CCM2.0/cv42-SOL/install
Installing on: SunOS <CCM2.0-server-hostname> 5.6 Generic_105181-16 sun4u sparc SUNW,Ultra-60
Should CiscoView be installed in /opt/CSCOcv (y/n)? [y]
Files installed will belong to user: bin group: bin
Use this owner and group ? (y/n)? [y]
Wait! Collecting List of device packages ... Done
Select Device Packages to Install:
(Device packages marked with (*) have been already installed)
Select by number from list ie:"1 2 3" or enter "all" or "none" ? [ all ]
Display README file when install completes (y/n)? [y] n
CiscoView 4.2 will:
- Be installed in: /opt/CSCOcv
- Not use a Network Management Platform
- Be owned by: bin
- Belong to group: bin
Device Packages to be installed:
ubr7200.pkg ubr900.pkg
Are these settings correct? (y/n)? [y]
Using </opt> as the package base directory.
## Processing package information.
## Processing system information.
3 package pathnames are already properly installed.
## Checking for setuid/setgid programs.
Installing CiscoView 4.2 as <CSCOcv>
## Installing part 1 of 1.
/opt/CSCOcv/bin/chkdpy
.
.
.
/opt/CSCOcv/lib/vuw.so
[ verifying class <ciscoview> ]
## Executing postinstall script.
Copying CiscoView application default files into place.
Startup script /opt/CSCOcv/bin/nmcview created.
Setting file permissions and ownership...
.
.
.
/opt/CSCOcv/bin/cvinstall: (V1.0) Starting CiscoView Package Install
INFO: user: root host: <CCM2.0-server-hostname> date: Fri Apr 6 17:19:55 PDT 2001
INFO: CiscoView installed at: /opt/CSCOcv
INFO: extracting package: /tmp/CCM2.0/cv42-SOL/cv_pkgs/cvnms.pkg Version 4.2(1.0)
INFO: Now extracting files from /tmp/CCM2.0/cv42-SOL/cv_pkgs/cvnms.pkg
INFO: Files Extracted...502
INFO: All Files extracted ok.
INFO: Now sorting mibs by IMPORTS clause...
INFO: ---- start CV parse on mib.txt ----
INFO: ---- CV parse completed ----
--- CV Config Statistics ---
INFO: 84 mib files from 6 directories for mib.dat.
INFO: 37 def files used to create mib.def.
INFO: 0 id files used to create cview.id.
INFO: 1 def files installed into /opt/CSCOcv/etc/cview/help.
INFO: 5 hlp files installed into /opt/CSCOcv/etc/cview/help.
---------- CV Config Completed ---
/opt/CSCOcv/bin/cvinstall:INFO:program completed normally.
INFO: Now extracting files from /tmp/CCM2.0/cv42-SOL/cv_pkgs/ubr7200.pkg
INFO: Files Extracted...767
Error Messages reported : 0
Warning Messages reported : 1
Refer to the package extract log file /opt/CSCOcv/devinstall.log for more details.
INFO: Now extracting files from /tmp/CCM2.0/cv42-SOL/cv_pkgs/ubr900.pkg
INFO: Files Extracted...820
Error Messages reported : 0
Warning Messages reported : 1
Refer to the package extract log file /opt/CSCOcv/devinstall.log for more details.
INFO: Now sorting mibs by IMPORTS clause...
INFO: ---- start CV parse on mib.txt ----
INFO: ---- CV parse completed ----
--- CV Config Statistics ---
INFO: 120 mib files from 29 directories for mib.dat.
.
.
.
INFO: 16 hlp files installed into /opt/CSCOcv/etc/cview/help.
---------- CV Config Completed ---
-------running cvtest -----
-------cvtest completed-----
-------cvtest was successful-----
INSTALLATION COMPLETE A complete logfile is located in /tmp/ciscoinstall.log.
Update your PATH to include /opt/CSCOcv/bin.
Install finished at Fri Apr 6 17:22:01 PDT 2001
Installation of <CSCOcv> was successful.
The following packages are available:
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]: q
CiscoView Classic package is installed
*****************************************************************
Welcome to the install-smu program. This scripts allows you
to install and remove SMUs from your Network Management Station.
Use 'install-smu -r' to remove existing SMUs. Please follow
the prompts and answer the questions.
*****************************************************************
Please enter the CiscoView base directory: /opt/CSCPO Ocv
README.cview42-01
Saving the original to /opt/CSCOcv/README.cview42-01.orig ...
Extracting /tmp/CCM2.0/cview-patch/README.cview42-01 to /opt/CSCOcv/README.cview42-01 ...
x README.cview42-01, 473 bytes, 1 tape blocks
bin/uninstall-smu
Saving the original to /opt/CSCOcv/bin/uninstall-smu.orig ...
Extracting /tmp/CCM2.0/cview-patch/bin/uninstall-smu to
/opt/CSCOcv/bin/uninstall-smu ...
x bin/uninstall-smu, 1647 bytes, 4 tape blocks
.
.
.
The SMU is installed. Thank you for choosing Cisco Systems!
Installation of CiscoView Classic Completed Successfully
Installing the DOCSIS configuration editor ...
CSCOcemfm is installed
AV_ROOT=/opt/cemf
x ., 0 bytes, 0 tape blocks
x ./docsisConfig, 0 bytes, 0 tape blocks
.
.
.
x ./docsisConfig/jre1.2.2/CHANGES, 10321 bytes, 21 tape blocks
Installation of the Config Editor Completed Successfully
Installation Completed
<CCM2.0-client-hostname># ./install_CCM2.0
Root is installing the CCM2.0 packages
Installation directory is: /tmp/CCM2.0
CSCOcemfc is installed
AV_ROOT=/opt/cemf
Installing the client version of CCM2.0
/tmp has write permission ...
/tmp/CCM2.0 has write permission ...
Checking the OS version ...
SunOS 5.6 installed ...
CCM2.0 is not INSTALLED ...so continuing
29617 /opt/cemf/bin/sysmgr
Are you sure you want to install cblMgrc [y] (y/n)? -> Yes chosen
Proceeding with Installation
/opt/cemf/bin/cemf load /tmp/CCM2.0/packages/cblMgrc
## Finding cemf root dir
cemf basedir = "/opt/cemf"
** Warning **
** It is strongly advised that you backup your databases
** before running this command.
** This can be achieved using the command "cemf backup"
** Warning **
** This command will stop all sessions connected to this
** machine.
## Script executed
Start of "cblMgrc" Installation
Time stamp Fri Apr 6 15:51:15 PDT 2001
## Checking package suitability
Package Ok.
Are you sure you wish to install the package "cblMgrc" [y] [y,n,?] y
Yes chosen.
## Installing package
Processing package instance <cblMgrc> from </tmp/CCM2.0/packages>
CableMgr
(sparc) 31
Cisco Systems
## Executing checkinstall script.
Using </opt/cemf> as the package base directory.
## Processing package information.
## Processing system information.
19 package pathnames are already properly installed.
## Verifying disk space requirements.
Installing CableMgr as <cblMgrc>
## Executing preinstall script.
## Installing part 1 of 1.
/opt/cemf/config/C/help/objectFiles/S00generic.types
/opt/cemf/config/C/help/objectFiles/S01alarms.types
.
.
.
/opt/cemf/config/templates/perfPollEM.template1
[ verifying class <none> ]
[ verifying class <partitioning> ]
[ verifying class <noreplace> ]
[ verifying class <replace> ]
/opt/cemf/bin/cblMgr
/opt/cemf/bin/perfPollEM
/opt/cemf/bin/ubrMgr
[ verifying class <binary> ]
[ verifying class <em_config> ]
## Executing postinstall script.
Installation of <cblMgrc> was successful.
Installation Ok.
## Registering package with CEMF Client
Registration successful.
## Changing the current runlevel
Saving old runlevel as "100000"
Setting new runlevel as "19999"
## Executing actions
binary - No Action Defined.
events - Running "/opt/cemf/config/selfManagement/actions/l.events binary"
em_config - No Action Defined.
events - Running "/opt/cemf/config/selfManagement/actions/l.events em_config"
none - No Action Defined.
events - Running "/opt/cemf/config/selfManagement/actions/l.events none"
noreplace - No Action Defined.
events - Running "/opt/cemf/config/selfManagement/actions/l.events noreplace"
partitioning - No Action Defined.
events - Running "/opt/cemf/config/selfManagement/actions/l.events partitioning"
replace - No Action Defined.
events - Running "/opt/cemf/config/selfManagement/actions/l.events replace"
## Resetting runlevel
Setting runlevel to "100000"
## Program Finished
Completed successfully.
application cblMgrc CableMgr
Installed cblMgrc Package
Installing the reporting applications ...
CSCOcemfc is installed
AV_ROOT=/opt/cemf
x ., 0 bytes, 0 tape blocks
x ./CMData.class, 557 bytes, 2 tape blocks
.
.
.
x ./PerformanceReport, 595 bytes, 2 tape blocks
Installation of the Reports Completed Successfully
Installing CCT
CSCOcemfc is installed
AV_ROOT=/opt/cemf
x ., 0 bytes, 0 tape blocks
x ./mibs, 0 bytes, 0 tape blocks
.
.
.
x ./winjre118/README, 16788 bytes, 33 tape blocks
Installation of CCT Completed Successfully
Installing CiscoView ...
CSCOcemfc is installed
AV_ROOT=/opt/cemf
x cv42-SOL, 0 bytes, 0 tape blocks
x cview-patch/smu.tar, 360448 bytes, 704 tape blocks
Starting Solaris Install...
The following packages are available:
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]:
Processing package instance <CSCOcv> from </tmp/CCM2.0/cv42-SOL>
CiscoView 4.2
(sparc) 4.2(1.0)
****************************************************************************
Copyright (c) 1997,1998 by Cisco Systems, Inc.
****************************************************************************
Welcome to CiscoView.
Install started at: Fri Apr 6 15:57:59 PDT 2001
Installing from: /tmp/CCM2.0/cv42-SOL/install
Installing on: SunOS <CCM2.0-client-hostname> 5.6 Generic_105181-16 sun4u sparc SUNW,Ultra-5_10
Should CiscoView be installed in /opt/CSCOcv (y/n)? [y]
Files installed will belong to user: bin group: bin
Use this owner and group ? (y/n)? [y]
Wait! Collecting List of device packages ... Done
Select Device Packages to Install:
(Device packages marked with (*) have been already installed)
Select by number from list ie:"1 2 3" or enter "all" or "none" ? [ all ]
Display README file when install completes (y/n)? [y] n
CiscoView 4.2 will:
- Be installed in: /opt/CSCOcv
- Not use a Network Management Platform
- Be owned by: bin
- Belong to group: bin
Device Packages to be installed:
ubr7200.pkg ubr900.pkg
Are these settings correct? (y/n)? [y]
Using </opt> as the package base directory.
## Processing package information.
## Processing system information.
3 package pathnames are already properly installed.
## Checking for setuid/setgid programs.
Installing CiscoView 4.2 as <CSCOcv>
## Installing part 1 of 1.
/opt/CSCOcv/bin/chkdpy
.
.
.
/opt/CSCOcv/lib/vuw.so
[ verifying class <ciscoview> ]
## Executing postinstall script.
Copying CiscoView application default files into place.
Startup script /opt/CSCOcv/bin/nmcview created.
Setting file permissions and ownership...
.
.
.
/opt/CSCOcv/bin/cvinstall: (V1.0) Starting CiscoView Package Install
INFO: user: root host: <CCM2.0-client-hostname> date: Fri Apr 6 15:58:28 PDT 2001
INFO: CiscoView installed at: /opt/CSCOcv
INFO: extracting package: /tmp/CCM2.0/cv42-SOL/cv_pkgs/cvnms.pkg Version 4.2(1.0)
INFO: Now extracting files from /tmp/CCM2.0/cv42-SOL/cv_pkgs/cvnms.pkg
INFO: Files Extracted...502
INFO: All Files extracted ok.
INFO: Now sorting mibs by IMPORTS clause...
INFO: ---- start CV parse on mib.txt ----
INFO: ---- CV parse completed ----
--- CV Config Statistics ---
INFO: 84 mib files from 6 directories for mib.dat.
INFO: 37 def files used to create mib.def.
INFO: 0 id files used to create cview.id.
INFO: 1 def files installed into /opt/CSCOcv/etc/cview/help.
INFO: 5 hlp files installed into /opt/CSCOcv/etc/cview/help.
---------- CV Config Completed ---
/opt/CSCOcv/bin/cvinstall:INFO:program completed normally.
INFO: Now extracting files from /tmp/CCM2.0/cv42-SOL/cv_pkgs/ubr7200.pkg
INFO: Files Extracted...767
Error Messages reported : 0
Warning Messages reported : 1
Refer to the package extract log file /opt/CSCOcv/devinstall.log for more details.
INFO: Now extracting files from /tmp/CCM2.0/cv42-SOL/cv_pkgs/ubr900.pkg
INFO: Files Extracted...820
Error Messages reported : 0
Warning Messages reported : 1
Refer to the package extract log file /opt/CSCOcv/devinstall.log for more details.
INFO: Now sorting mibs by IMPORTS clause...
INFO: ---- start CV parse on mib.txt ----
INFO: ---- CV parse completed ----
--- CV Config Statistics ---
INFO: 120 mib files from 29 directories for mib.dat.
.
.
.
INFO: 16 hlp files installed into /opt/CSCOcv/etc/cview/help.
---------- CV Config Completed ---
-------running cvtest -----
-------cvtest completed-----
-------cvtest was successful-----
INSTALLATION COMPLETE A complete logfile is located in /tmp/ciscoinstall.log.
Update your PATH to include /opt/CSCOcv/bin.
Install finished at Fri Apr 6 15:59:50 PDT 2001
Installation of <CSCOcv> was successful.
The following packages are available:
Select package(s) you wish to process (or 'all' to process
all packages). (default: all) [?,??,q]: q
CiscoView Classic package is installed
*****************************************************************
Welcome to the install-smu program. This scripts allows you
to install and remove SMUs from your Network Management Station.
Use 'install-smu -r' to remove existing SMUs. Please follow
the prompts and answer the questions.
*****************************************************************
Please enter the CiscoView base directory: /opt/CSCOcv
README.cview42-01
Saving the original to /opt/CSCOcv/README.cview42-01.orig ...
Extracting /tmp/CCM2.0/cview-patch/README.cview42-01 to
/opt/CSCOcv/README.cview42-01 ...
x README.cview42-01, 473 bytes, 1 tape blocks
bin/uninstall-smu
Saving the original to /opt/CSCOcv/bin/uninstall-smu.orig ...
Extracting /tmp/CCM2.0/cview-patch/bin/uninstall-smu to /opt/CSCOcv/bin/uninstall-smu ...
x bin/uninstall-smu, 1647 bytes, 4 tape blocks
The SMU is installed. Thank you for choosing Cisco Systems!
Installation of CiscoView Classic Completed Successfully
Installing the DOCSIS configuration editor ...
CSCOcemfc is installed
AV_ROOT=/opt/cemf
x ., 0 bytes, 0 tape blocks
x ./docsisConfig, 0 bytes, 0 tape blocks
.
.
.
x ./docsisConfig/jre1.2.2/CHANGES, 10321 bytes, 21 tape blocks
Installation of the Config Editor Completed Successfully
Installation Completed
<CCM2.0-server-hostname># ./uninstall_CCM2.0
CSCOcemfm is installed
** Warning **
** It is strongly advised that you backup your databases
** before running this command.
** This can be achieved using the command "cemf backup"
** Warning **
** This command will stop all sessions connected to this
** machine.
Suspending participation. Please wait.
Suspending alarm processing. Please wait.
WARNING - This will remove all the databases. All of
your data will be lost.
Are you sure [Ny]: y
Deleting databases ...
Do you want to save performance and inventory reports [y] (y/n)? -> n
Chose not to save and performance and inventory reports
Do you want to save uBR configuration files [y] (y/n)? -> n
Chose not to save uBR configuration files
Do you want to save the auto-discovery spec. file [y] (y/n)? -> n
Chose not to save the auto-discovery spec. file
Exiting script to save reports and uBR configuration files
Removing CiscoView 4.2
The following package is currently installed:
Do you want to remove this package? y
## Removing installed package instance <CSCOcv>
This package contains scripts which will be executed with super-user
permission during the process of removing this package.
Do you want to continue with the removal of this package [y,n,?,q] y
Uninstallation of CiscoView Classic Completed Successfully
WARNING: Saved reports will be lost because of the uninstallation
Uninstallation of the Performance Report package completed successfully
Uninstallation of the Reports Completed Successfully
Removed all CCM2.0 packages
CCM2.0 uninstallation completed
If you need to uninstall CEMF, please run the script <uninstall_CEMF>
<CCM2.0-client-hostname># ./uninstall_CCM2.0
CSCOcemfc is installed
** Warning **
** It is strongly advised that you backup your databases
** before running this command.
** This can be achieved using the command "cemf backup"
** Warning **
** This command will stop all sessions connected to this
** machine.
Are you sure you wish to remove the package "cblMgrc" [y] [y,n,?] y
Yes chosen.
Removal of <cblMgrc> was successful.
Suspending participation. Please wait.
Suspending alarm processing. Please wait.
Stopping CEMF Client system.
Resetting CEMF Client to its installed state.
WARNING - This will remove all the databases. All of
your data will be lost.
Are you sure [Ny]: y
Deleting databases ...
Do you want to save performance and inventory reports [y] (y/n)? -> n
Chose not to save and performance and inventory reports
Do you want to save uBR configuration files [y] (y/n)? -> n
Chose not to save uBR configuration files
Exiting script to save reports and uBR configuration files
Uninstallation of the Config Editor Completed Successfully
The following package is currently installed:
Do you want to remove this package? y
## Removing installed package instance <CSCOcv>
This package contains scripts which will be executed with super-user
permission during the process of removing this package.
Do you want to continue with the removal of this package [y,n,?,q] y
Removal of <CSCOcv> was successful.
Uninstallation of CiscoView Classic Completed Successfully
Uninstallation of CCT Completed Successfully
CSCOcemfc is installed
WARNING: Saved reports will be lost because of the uninstallation
Uninstallation of the Performance Report package completed successfully
Uninstallation of the Reports Completed Successfully
Removed all CCM2.0 packages
CCM2.0 uninstallation completed
If you need to uninstall CEMF, please run the script <uninstall_CEMF>
Posted: Tue Feb 25 05:35:02 PST 2003
All contents are Copyright © 1992--2002 Cisco Systems, Inc. All rights reserved.
Important Notices and Privacy Statement.