This section discusses the objectives, audience, and conventions of the LightStream 2020 Network Operations Guide. It also lists related Cisco documentation for the LightStream 2020 (LS2020).
The LightStream 2020 Network Operations Guide is a task-oriented guide that describes how to operate and manage a network of LS2020 enterprise ATM switches. The guide presents an overview of network operation and management tasks, describes the command line interface (CLI), and provides procedures for monitoring switches and collecting statistics.
Your network should be fully installed and configured before you attempt to operate it. See the LightStream 2020 Installation Guide for installation instructions and the LightStream 2020 Configuration Guide for information on configuration.
The LightStream 2020 Network Operations Guide is intended for anyone who operates an LS2020 network. This guide provides detailed procedures to help you operate the LS2020 network after it has been installed and configured.
Users of the LS2020 document set are expected to have a general understanding of basic data communications concepts, some knowledge of UNIX, and a familiarity with the interfaces used by the devices connecting to their LS2020 network.
If you are planning to use the bridging features of the LS2020 product, working knowledge of bridging standards and conventions is recommended. It is also recommended that you have a working knowledge of TCP/IP networks.
This guide has seven chapters and an appendix.
- Chapter 1, "Operations and Management Overview," lists network operations and management tasks.
- Chapter 2, "Command Line Interface," tells you how to use the command line interface (CLI).
- Chapter 3, "SNMP Commands," describes the SNMP commands available from the CLI.
- Chapter 4, "Monitoring a LightStream 2020 Switch," tells you how to monitor an LS2020 switch and its components.
- Chapter 5, "Administrative Tasks," describes administrative tasks, such as setting the SNMP community, changing configuration attributes using the CLI, and defining bridge filters.
- Chapter 6, "Isolating Port Problems," details trunk line monitoring, isolating trunk problems, and troubleshooting procedures.
- Chapter 7, "LightStream 2020 Statistics and Data Collections," tells you how to collect and view statistics and set up collections.
- Appendix A, "Software Recovery," explains how to re-install software onto the hard disk of the LS2020 switch that has experienced a problem.
The following conventions distinguish different types of text:
- Commands and keywords are in boldface.
- In interactive examples, user input is in boldface.
- In command syntax statements:
- Parameters (variables for which a specific value is to be typed) are in italics.
- Optional arguments are in square braces.
- Alternative arguments are separated by vertical bars, and are grouped within curly braces.
- Names of keys on the keyboard are in square braces, for example, the [Tab] key.
- Control keys are indicated by a caret preceding a letter: ^A means Control-A.
Note Means
reader take note. Notes contain helpful suggestions or references to material not covered in the manual.
| Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. |
The following is a list of LS2020 manuals and other material relevant to LS2020 users:
- LightStream 2020 System Overview
- The system overview introduces the LS2020 switch and the Asynchronous Transfer Mode (ATM) technology on which the LS2020 product is based. It describes the traffic flow through an LS2020 network. In addition, it describes key features, such as traffic and network management.
- LightStream 2020 Site Planning and Cabling Guide
- The site planning and cabling guide describes how to prepare your site to receive LS2020 hardware. It includes space, environmental and electrical requirements, rack selection guidelines, requirements for the management workstation, and information on cables and connectors.
- LightStream 2020 Installation Guide
- The installation guide tells you how to install and set up LS2020 switches and how to install LS2020 management software on your network management workstation.
- LightStream 2020 Hardware Reference and Troubleshooting Guide
- The hardware troubleshooting guide provides a detailed description of LS2020 hardware and tells you how to diagnose hardware problems and how to replace faulty hardware components.
- LightStream 2020 Configuration Guide
- The configuration guide provides the information you need to configure LS2020 switches. It describes the configuration tools and how to use them. It describes the configuration database and defines all configurable attributes and their settings. The guide also provides step-by-step configuration procedures.
- LightStream 2020 NP O/S Manual
- The NP O/S manual provides detailed descriptions of the most frequently used LynxOS commands and of the bash shell. It also provides a tutorial introduction and reference guide to the vi editor.
- LightStream 2020 Traps Reference Manual
- The manual presents an overview of LS2020 traps and how they are generated by the LS2020 switch. It provides the procedures for managing trap reporting, such as setting trap levels, enabling/disabling individual traps, and determining where the traps are displayed. It also describes all SNMP and operational traps: the descriptions include trap name, text, cause and user response.
- LightStream 2020 CLI Reference Manual
- The CLI reference manual provides detailed descriptions of the syntax and functions of all CLI commands. It also describes the LS2020 private MIB.
- LightStream 2020 Command Line Interface (CLI) Reference Car d
- The reference card compactly summarizes the syntax and arguments of all CLI commands.
- LightStream 2020 Release Notes
- The release notes provide a software upgrade procedure and describe new features and special considerations, including information on known software bugs.
Note The release notes contain important information that was not available when the other documents were printed.
- LightStream 2020 Online Help
- The LightStream 2020 CLI and configuration program both support online help facilities.
- Internetworking Terms and Acronyms
- This guide is a glossary of terms and acronyms used in the field of internetworking, including material of interest to users of the LightStream 2020.
-
To order these publications or additional copies of the LightStream 2020 Network Operations Guide, contact your sales representative. (The Customer Order Number for each manual is located at the bottom of the title page.) Customer service can provide you with the name of your sales representative if necessary.
Phone: 1-800-553-NETS (6387) or (415) 326-1941
E-mail: customer-service@cisco.com