Skeleton Configuration File

At startup, the Cisco HSI reads a skeleton file, which contains information for every configurable item within the system. It determines which group the item is in and what its possible ranges are. The format for each item is:

The package name is an MML name for dynamic and static data, and service package names (determined within the detailed design) for constant data.

The item name is as specified in the detailed design (that is, all constant data).

The group is one of the following:

• S = Static data
  
  
• D = Dynamic data
  
  
• C = Constant data
  
  

The ValueRange is one of the following:

• [ ] = Number: No range
  
  
• [x-y] = Number: Acceptable range x to y
  
  
• STRING = String value
  
  
• NULL = No associated value
  
  

An example of this command is as follows:

In the above example, the PackageName is RAS, the ItemName is maxFail, it is a dynamic configuration item, and it is a numerical data type with an acceptable range of 1 to 200.

The skeleton file allows the system technician to set whether data is provisionable and whether provisionable data is static or dynamic.

Note   The skeleton configuration file should be modified only by authorized personnel.

The following is an example of a skeleton file: