|
This appendix describes events that generate RADIUS accounting records sent from the Cisco 6510 to the accounting server. The following sections describe accounting records, their associated event and their corresponding attributes.
During Cisco 6510 initialization, the Cisco 6510 sends a RADIUS accounting-request to the accounting server. The attributes associated with this record are:
Acct-Status-Type = Accounting-On
NAS-IP-Address = ip_address
Acct-Session-Id = "00000001"
Proxy-State = "n"
ip_address
IP address of the Cisco 6510 interface card 1.
n
Accounting record queuing information (has no effect on account billing).
Cisco 6510 Shutdown
During Cisco 6510 reboot, the Cisco 6510 sends a RADIUS accounting-request to the accounting server. The attributes associated with this record are:
Acct-Status-Type = Accounting-Off
NAS-IP-Address = ip_address
Acct-Terminate-Cause = Admin-Reboot
Acct-Session-Id = "00000001"
Proxy-State = "n"
ip_address
IP address of the Cisco 6510 interface card 1.
n
Accounting record queuing information (has no effect on account billing).
Account Logon
When a user logs on, the Cisco 6510 sends a RADIUS accounting-request to the accounting server. The attributes associated with this record are:
Acct-Status-Type = Start
NAS-IP-Address = ip_address
User-Name = "username"
Acct-Session-Id = "session_id"
Framed-IP-Address = user_ip
Proxy-State = "n"
ip_address
IP address of the Cisco 6510 interface card 1.
username
Name used to log on to the service provider network.
session_id
Session Number
user_ip
IP address of the user's system.
n
Accounting record queuing information (has no effect on account billing).
Account Logoff
When a user logs off, the Cisco 6510 sends a RADIUS accounting-request to the accounting server. The attributes associated with this record are:
Acct-Status-Type = Stop
NAS-IP-Address = ip_address
User-Name = "username"
Acct-Session-Time = time
Acct-Terminate-Cause = cause
Acct-Session-Id = "session_id"
Framed-Address = user_ip
Proxy-State = "n"
ip_address
IP address of the Cisco 6510 interface card 1.
username
Name used to log on to the service providers network.
time
Length of session in seconds.
cause
Cause of account termination. These may include:
· User-Request
· Session-Timeout
session_id
Session Number
user_ip
IP address of the user's system.
n
Accounting record queuing information (has no effect on account billing).
Service Start
When a service is established, the Cisco 6510 sends a RADIUS accounting-request to the accounting server. The attributes associated with this record are:
Acct-Status-Type = Start
User-Name = "hostname"
NAS-IP-Address = ip_address
Acct-Session-Id = "session_id"
Proxy-State = "n"
service
Name of the service profile.
ip_address
IP address of the Cisco 6510 interface card 1.
session_id
Session Number
n
Accounting record queuing information (has no effect on account billing).
Service Stop
When a service is terminated, the Cisco 6510 sends a RADIUS accounting-request to the accounting server. The attributes associated with this record are:
Acct-Status-Type = Stop
User-Name = "service"
NAS-IP-Address = ip_address
Acct-Input-Octets = in_bytes
Acct-Output-Octets = out_bytes
Acct-Session-Time = time
Acct-Terminate-Cause = cause
Acct-Session-Id = "session_id"
Proxy-State = "n"
service
Name of the service profile.
ip_address
IP address of the Cisco 6510 interface card 1.
in_bytes
Number of inbound bytes.
out_bytes
Number of outbound bytes.
time
Length of session in seconds.
cause
Cause of account termination. These include:
· Lost-Carrier
· Lost-Service
· Host-Request
· Session-Timeout
session_id
Session Number
n
Accounting record queuing information (has no effect on account billing).
Connection Start
When a user accesses a service, the Cisco 6510 sends a RADIUS accounting-request to the accounting server. The attributes associated with this record are:
Acct-Status-Type = Start
NAS-IP-Address = ip_address
User-Name = "username"
Acct-Authentic = RADIUS
Acct-Session-Id = "session_id"
Service-Info = "Nservice"
Service-Info = "Uhg_username"
Service-Info = "type"
Proxy-State = "n"
ip_address
IP address of the Cisco 6510 interface card 1.
username
Name used to log on to the service provider network.
session_id
Session Number
service
Name of the service profile.
hg_username
The username used to authenticate the user with the home gateway. This attribute is used for tunneled connections only.
type
TT--Tunneled connection.
TI--Internet (packet-forward) connection.
n
Accounting record queuing information (has no effect on account billing).
Connection Stop
When a user terminates a service, the Cisco 6510 sends a RADIUS accounting-request to the accounting server. The attributes associated with this record are:
Acct-Status-Type = Stop
NAS-IP-Address = ip_address
User-Name = "username"
Acct-Input-Octets = in_bytes
Acct-Output-Octets = out_bytes
Acct-Session-Time = time
Acct-Terminate-Cause = cause
Acct-Session-Id = "session_id"
Service-Info = "service"
Service-Info = "hg_username"
Service-Info = "type"
Proxy-State = "n"
ip_address
IP address of the Cisco 6510 interface card 1.
username
Name used to log on to the service provider network.
in_bytes
Number of inbound bytes.
out_bytes
Number of outbound bytes.
time
Length of session in seconds.
cause
Cause of service termination. These include:
· User-Request
· Lost-Carrier
· Lost-Service
· Session-Timeout
session_id
Session Number
service
Name of the service profile.
hg_username
The username used to authenticate the user with the home gateway. This attribute is used for tunneled connections only.
type
TT--Tunneled connection.
TI--Internet (packet-forward) connection.
n
Accounting record queuing information (has no effect on account billing).
|