RFC1243


RFC index | STD index | BCP index | FYI index
Plain text | gzipped plain text | A4 postscript | A4 postscript, 2 up | A4 postscript, 4 up
Network Working Group S. Waldbusser, Editor Request for Comments: 1243 Carnegie Mellon University July 1991 AppleTalk Management Information Base Status of this Memo This memo defines objects for managing AppleTalk objects for use with the SNMP protocol. This memo is a product of the AppleTalk-IP Working Group of the Internet Engineering Task Force (IETF). This RFC specifies an IAB standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "IAB Official Protocol Standards" for the standardization state and status of this protocol. Distribution of this memo is unlimited. Table of Contents 1. Abstract .............................................. 1 2. The Network Management Framework....................... 2 3. Objects ............................................... 2 3.1 Format of Definitions ................................ 3 4. Overview .............................................. 3 4.1 Structure of MIB ..................................... 3 4.2 The LocalTalk Link Access Protocol Group ............. 3 4.3 The AppleTalk Address Resolution Protocol Group ...... 4 4.4 The AppleTalk Port Group ............................. 4 4.5 The Datagram Delivery Protocol Group ................. 4 4.6 The Routing Table Maintenance Protocol Group ......... 4 4.7 The Kinetics Internet Protocol Group ................. 4 4.8 The Zone Information Protocol Group .................. 4 4.9 The Name Binding Protocol Group ...................... 4 4.10 The AppleTalk Echo Protocol Group ................... 5 4.11 Textual Conventions ................................. 5 5. Definitions ........................................... 5 6. Acknowledgements ...................................... 27 7. References ............................................ 28 8. Security Considerations................................ 29 9. Author's Address....................................... 29

1. Abstract

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, it defines objects for managing AppleTalk networks. AppleTalk-IP Working Group [Page 1]
RFC 1243 AppleTalk MIB July 1991

2. The Network Management Framework

The Internet-standard Network Management Framework consists of three components. They are: RFC 1155 which defines the SMI, the mechanisms used for describing and naming objects for the purpose of management. RFC 1212 defines a more concise description mechanism, which is wholly consistent with the SMI. RFC 1156 which defines MIB-I, the core set of managed objects for the Internet suite of protocols. RFC 1213, defines MIB-II, an evolution of MIB-I based on implementation experience and new operational requirements. RFC 1157 which defines the SNMP, the protocol used for network access to managed objects. The Framework permits new objects to be defined for the purpose of experimentation and evaluation.

3. Objects

Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the subset of Abstract Syntax Notation One (ASN.1) [7] defined in the SMI. In particular, each object has a name, a syntax, and an encoding. The name is an object identifier, an administratively assigned name, which specifies an object type. The object type together with an object instance serves to uniquely identify a specific instantiation of the object. For human convenience, we often use a textual string, termed the OBJECT DESCRIPTOR, to also refer to the object type. The syntax of an object type defines the abstract data structure corresponding to that object type. The ASN.1 language is used for this purpose. However, the SMI [3] purposely restricts the ASN.1 constructs which may be used. These restrictions are explicitly made for simplicity. The encoding of an object type is simply how that object type is represented using the object type's syntax. Implicitly tied to the notion of an object type's syntax and encoding is how the object type is represented when being transmitted on the network. The SMI specifies the use of the basic encoding rules of ASN.1 [8], subject to the additional requirements imposed by the SNMP. AppleTalk-IP Working Group [Page 2]
RFC 1243 AppleTalk MIB July 1991

3.1. Format of Definitions

Section 5 contains the specification of all object types contained in this MIB module. The object types are defined using the conventions defined in the SMI, as amended by the extensions specified in [9,10].

4. Overview

AppleTalk is a protocol suite which features an open peer-to-peer architecture that runs over a variety of transmission media. AppleTalk is defined in [10]. This protocol suite interoperates with the IP protocol suite through various encapsulation methods. As large AppleTalk networks are built that coexist with large IP networks, a method to manage the AppleTalk networks with SNMP becomes necessary. This MIB defines managed objects to be used for managing AppleTalk networks.

4.1. Structure of MIB

The objects are arranged into the following groups: - LLAP - AARP - ATPort - DDP - RTMP - KIP - ZIP - NBP - ATEcho These groups are the basic unit of conformance. If the semantics of a group is applicable to an implementation, then it must implement all objects in that group. For example, a managed agent must implement the KIP group if and only if it implements the KIP protocol. These groups are defined to provide a means of assigning object identifiers, and to provide a method for managed agents to know which objects they must implement.

4.2. The LocalTalk Link Access Protocol Group

The LocalTalk Link Access Protocol (LLAP) is a medium-speed data-link protocol designed for low cost and plug-and-play operation. The LLAP group is designed to manage all interfaces on a managed device that use this protocol. AppleTalk-IP Working Group [Page 3]
RFC 1243 AppleTalk MIB July 1991

4.3. The AppleTalk Address Resolution Protocol Group

The AppleTalk Address Resolution Protocol (AARP) is used to map between AppleTalk node addresses, used by the Datagram Delivery Protocol, and the addresses of the underlying data link layer. The AARP table allows for management of the Address Mapping Table on the managed device.

4.4. The AppleTalk Port Group

An AppleTalk Port is a logical connection to a network over which AppleTalk packets can be transmitted. This group allows the management of the configuration of these AppleTalk ports.

4.5. The Datagram Delivery Protocol Group

The Datagram Delivery Protocol (DDP) is the network-layer protocol that is responsible for the socket-to-socket delivery of datagrams over the AppleTalk Internet. This group manages the DDP layer on the managed device.

4.6. The Routing Table Maintenance Protocol Group

The Routing Table Maintenance Protocol (RTMP) is used by AppleTalk routers to create and maintain the routing tables that dictate the process of forwarding datagrams on the AppleTalk internet. The RTMP group manages the RTMP protocol as well as the routing tables generated by this protocol.

4.7. The Kinetics Internet Protocol Group

The Kinetics Internet Protocol (KIP) is a protocol for encapsulating and routing AppleTalk datagrams over an IP internet. This name is historical. The KIP group manages the KIP routing protocol as well as the routing tables generated by this protocol.

4.8. The Zone Information Protocol Group

The Zone Information Protocol (ZIP) is used to maintain a mapping between networks and zone names to facilitate the name lookup process performed by the Name Binding Protocol. The ZIP group manages this protocol and the mapping it produces.

4.9. The Name Binding Protocol Group

The Name Binding Protocol (NBP) is a transport-level protocol that is used to convert human readable service names into the numeric AppleTalk network addresses needed for communicating across the AppleTalk-IP Working Group [Page 4]
RFC 1243 AppleTalk MIB July 1991 AppleTalk network. The NBP group manages this protocol and the NBP services that exist on the managed device.

4.10. The AppleTalk Echo Protocol Group

The AppleTalk Echo Protocol is a transport-level protocol used to test and verify the status of the AppleTalk internet. The AtEcho group manages this protocol.

4.11. Textual Conventions

A new data type is introduced as a textual convention in this MIB document. This textual convention enhances the readability of the specification and can ease comparison with other specifications if appropriate. It should be noted that the introduction of this textual convention has no effect on either the syntax or the semantics of any managed objects. The use of this is merely an artifact of the explanatory method used. Objects defined in terms of this method are always encoded by means of the rules that define the primitive type. Hence, no changes to the SMI or the SNMP are necessary to accommodate this textual convention which is adopted merely for the convenience of readers and writers in pursuit of the elusive goal of clear, concise, and unambiguous MIB documents. The new data type is: DdpAddress ::= -- 2 octets of net number, -- 1 octet of node number OCTET STRING (SIZE (3))

5. Definitions

RFC1243-MIB DEFINITIONS ::= BEGIN IMPORTS Counter, IpAddress FROM RFC1155-SMI DisplayString, mib-2 FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212; -- This MIB module uses the extended OBJECT-TYPE macro as -- defined in [9] -- AppleTalk MIB AppleTalk-IP Working Group [Page 5]
RFC 1243 AppleTalk MIB July 1991 appletalk OBJECT IDENTIFIER ::= { mib-2 13 } DdpAddress ::= -- 2 octets of net number -- 1 octet of node number OCTET STRING (SIZE (3)) -- This data type is used for encoding a DDP protocol -- address. The format of this address is a serial -- encoding of the two octets of network number in -- network byte order, followed by the 1 octet node -- number. llap OBJECT IDENTIFIER ::= { appletalk 1 } aarp OBJECT IDENTIFIER ::= { appletalk 2 } atport OBJECT IDENTIFIER ::= { appletalk 3 } ddp OBJECT IDENTIFIER ::= { appletalk 4 } rtmp OBJECT IDENTIFIER ::= { appletalk 5 } kip OBJECT IDENTIFIER ::= { appletalk 6 } zip OBJECT IDENTIFIER ::= { appletalk 7 } nbp OBJECT IDENTIFIER ::= { appletalk 8 } atecho OBJECT IDENTIFIER ::= { appletalk 9 } -- The LLAP Group llapTable OBJECT-TYPE SYNTAX SEQUENCE OF LlapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The list of LLAP entries." ::= { llap 1 } llapEntry OBJECT-TYPE SYNTAX LlapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An LLAP entry containing objects for the LocalTalk Link Access Protocol for a particular LocalTalk interface." INDEX { llapIfIndex } ::= { llapTable 1 } LlapEntry ::= SEQUENCE { llapIfIndex INTEGER, llapInPkts Counter, llapOutPkts Counter, llapInNoHandlers Counter, AppleTalk-IP Working Group [Page 6]
RFC 1243 AppleTalk MIB July 1991 llapInLengthErrors Counter, llapInBads Counter, llapCollisions Counter, llapDefers Counter, llapNoDataErrors Counter, llapRandomCTSErrors Counter, llapFCSErrors Counter } llapIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The LLAP interface to which this entry pertains. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { llapEntry 1 } llapInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of good packets received on this LocalTalk interface." ::= { llapEntry 2 } llapOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets transmitted on this LocalTalk interface." ::= { llapEntry 3 } llapInNoHandlers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of good packets received on this LocalTalk interface for which there was no protocol handler." ::= { llapEntry 4 } AppleTalk-IP Working Group [Page 7]
RFC 1243 AppleTalk MIB July 1991 llapInLengthErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets received on this LocalTalk interface whose actual length did not match the length in the header." ::= { llapEntry 5 } llapInErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of packets containing errors received on this LocalTalk interface." ::= { llapEntry 6 } llapCollisions OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of collisions assumed on this LocalTalk interface due to the lack of a lapCTS reply." ::= { llapEntry 7 } llapDefers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of times this LocalTalk interface deferred to other packets." ::= { llapEntry 8 } llapNoDataErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of times this LocalTalk interface received a lapRTS packet and expected a data packet, but did not receive any data packet." ::= { llapEntry 9 } AppleTalk-IP Working Group [Page 8]
RFC 1243 AppleTalk MIB July 1991 llapRandomCTSErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of times this LocalTalk interface received a lapCTS packet that was not solicited by a lapRTS packet." ::= { llapEntry 10 } llapFCSErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of times this LocalTalk interface received a packet with an FCS (Frame Check Sequence) error." ::= { llapEntry 11 } -- The AARP Group aarpTable OBJECT-TYPE SYNTAX SEQUENCE OF AarpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The AppleTalk Address Translation Table contains an equivalence of AppleTalk Network Addresses to the link layer physical address." ::= { aarp 1 } aarpEntry OBJECT-TYPE SYNTAX AarpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains one AppleTalk Network Address to physical address equivalence." INDEX { aarpIfIndex, aarpNetAddress } ::= { aarpTable 1 } AarpEntry ::= SEQUENCE { aarpIfIndex INTEGER, aarpPhysAddress OCTET STRING, aarpNetAddress DdpAddress } AppleTalk-IP Working Group [Page 9]
RFC 1243 AppleTalk MIB July 1991 aarpIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { aarpEntry 1 } aarpPhysAddress OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "The media-dependent physical address" ::= { aarpEntry 2 } aarpNetAddress OBJECT-TYPE SYNTAX DdpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The AppleTalk Network Address corresponding to the media-dependent physical address." ::= { aarpEntry 3 } -- The ATPort Group atportTable OBJECT-TYPE SYNTAX SEQUENCE OF AtportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of AppleTalk ports for this entity." ::= { atport 1 } atportEntry OBJECT-TYPE SYNTAX AtportEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The description of one of the AppleTalk ports on this entity." INDEX { atportIndex } AppleTalk-IP Working Group [Page 10]
RFC 1243 AppleTalk MIB July 1991 ::= { atportTable 1 } AtportEntry ::= SEQUENCE { atportIndex INTEGER, atportDescr DisplayString, atportType INTEGER, atportNetStart OCTET STRING (SIZE(2)), atportNetEnd OCTET STRING (SIZE(2)), atportNetAddress DdpAddress, atportStatus INTEGER, atportNetConfig INTEGER, atportZoneConfig INTEGER, atportZone OCTET STRING, atportIfIndex INTEGER } atportIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each AppleTalk port. Its value is between 1 and the total number of AppleTalk ports. The value for each port must remain constant at least from the re-initialization of the entity's network management system to the next re-initialization." ::= { atportEntry 1 } atportDescr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A text string containing information about the port. This string is intended for presentation to a human; it must not contain anything but printable ASCII characters." ::= { atportEntry 2 } atportType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following localtalk(2), ethertalk1(3), ethertalk2(4), tokentalk(5), AppleTalk-IP Working Group [Page 11]
RFC 1243 AppleTalk MIB July 1991 iptalk(6), serial-ppp(7), serial-nonstandard(8), virtual(9) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of port, distinguished by the protocol immediately below DDP in the protocol stack." ::= { atportEntry 3 } atportNetStart OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-write STATUS mandatory DESCRIPTION "The first AppleTalk network address in the range configured for this port. This is a two octet DDP network address in network byte order." ::= { atportEntry 4 } atportNetEnd OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-write STATUS mandatory DESCRIPTION "The last AppleTalk network address in the range configured for this port. This is a two octet DDP network address in network byte order. If the network to which this AppleTalk port is connected is a Phase 1 network or a non-extended network, the value for atportNetEnd shall be two octets of zero." ::= { atportEntry 5 } atportNetAddress OBJECT-TYPE SYNTAX DdpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The AppleTalk network address configured for this port." ::= { atportEntry 6 } atportStatus OBJECT-TYPE SYNTAX INTEGER { operational(1), AppleTalk-IP Working Group [Page 12]
RFC 1243 AppleTalk MIB July 1991 unconfigured(2), off(3), invalid(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The configuration status of this port. Setting this object to the value invalid(4) has the effect of invalidating the corresponding entry in the atportTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant atportStatus object." ::= { atportEntry 7 } atportNetConfig OBJECT-TYPE SYNTAX INTEGER { configured(1), -- explicit configuration. garnered(2), -- assumed from inspection of net. guessed(3), -- a "random" configuration. unconfigured(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The configuration status of this port." ::= { atportEntry 8 } atportZoneConfig OBJECT-TYPE SYNTAX INTEGER { configured(1), -- explicit configuration garnered(2), -- assumed from inspection of net. guessed(3), -- a "random" configuration. unconfigured(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The configuration status of the zone information AppleTalk-IP Working Group [Page 13]
RFC 1243 AppleTalk MIB July 1991 for this port." ::= { atportEntry 9 } atportZone OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The zone name configured for this AppleTalk port." ::= { atportEntry 10 } atportIfIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The physical interface associated with this AppleTalk port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex." ::= { atportEntry 11 } -- The DDP Group ddpOutRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of DDP datagrams which were supplied to DDP by local DDP clients in requests for transmission. Note that this counter does not include any datagrams counted in ddpForwRequests." ::= { ddp 1 } ddpOutShorts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of short DDP datagrams which were transmitted from this entity." ::= { ddp 2 } AppleTalk-IP Working Group [Page 14]
RFC 1243 AppleTalk MIB July 1991 ddpOutLongs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of long DDP datagrams which were transmitted from this entity." ::= { ddp 3 } ddpInReceives OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input datagrams received by DDP, including those received in error." ::= { ddp 4 } ddpForwRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of input datagrams for which this entity was not their final DDP destination, as a result of which an attempt was made to find a route to forward them to that final destination." ::= { ddp 5 } ddpInLocalDatagrams OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams for which this entity was their final DDP destination." ::= { ddp 6 } ddpNoProtocolHandlers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of DDP datagrams addressed to this entity that were addressed to an upper layer protocol for which no protocol handler existed." AppleTalk-IP Working Group [Page 15]
RFC 1243 AppleTalk MIB July 1991 ::= { ddp 7 } ddpOutNoRoutes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of DDP datagrams dropped because a route could not be found to their final destination." ::= { ddp 8 } ddpTooShortErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams dropped because the received data length was less than the data length specified in the DDP header or the received data length was less than the length of the expected DDP header." ::= { ddp 9 } ddpTooLongErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams dropped because the received data length was greater than the data length specified in the DDP header or because they exceeded the maximum DDP datagram size." ::= { ddp 10 } ddpBroadcastErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams dropped because this entity was not their final destination and they were addressed to the link level broadcast." ::= { ddp 11 } AppleTalk-IP Working Group [Page 16]
RFC 1243 AppleTalk MIB July 1991 ddpShortDDPErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams dropped because this entity was not their final destination and their type was short DDP." ::= { ddp 12 } ddpHopCountErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams dropped because this entity was not their final destination and their hop count would exceed 15." ::= { ddp 13 } ddpChecksumErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of input DDP datagrams dropped because of a checksum error." ::= { ddp 14 } -- The RTMP Group rtmpTable OBJECT-TYPE SYNTAX SEQUENCE OF RtmpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of Routing Table Maintenance Protocol entries for this entity." ::= { rtmp 1 } rtmpEntry OBJECT-TYPE SYNTAX RtmpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The route entry to a particular network range." INDEX { rtmpRangeStart } AppleTalk-IP Working Group [Page 17]
RFC 1243 AppleTalk MIB July 1991 ::= { rtmpTable 1 } RtmpEntry ::= SEQUENCE { rtmpRangeStart OCTET STRING (SIZE(2)), rtmpRangeEnd OCTET STRING (SIZE(2)), rtmpNextHop OCTET STRING, rtmpType INTEGER, rtmpPort INTEGER, rtmpHops INTEGER, rtmpState INTEGER } rtmpRangeStart OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-write STATUS mandatory DESCRIPTION "The first DDP network address in the network range to which this routing entry pertains. This is a two octet DDP network address in network byte order." ::= { rtmpEntry 1 } rtmpRangeEnd OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-write STATUS mandatory DESCRIPTION "The last DDP network address in the network range to which this routing entry pertains. This is a two octet DDP network address in network byte order. If the network to which this routing entry pertains is a Phase 1 network or a non-extended network, the value for rtmpRangeEnd shall be two octets of zero." ::= { rtmpEntry 2 } rtmpNextHop OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The next hop in the route to this entry's destination network. If the type of this route is Appletalk, this address takes the same form as DdpAddress." ::= { rtmpEntry 3 } AppleTalk-IP Working Group [Page 18]
RFC 1243 AppleTalk MIB July 1991 rtmpType OBJECT-TYPE SYNTAX INTEGER { other(1), appletalk(2), serial-ppp(3), serial-nonstandard(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of network over which this route points." ::= { rtmpEntry 4 } rtmpPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The index of the AppleTalk port over which this route points." ::= { rtmpEntry 5 } rtmpHops OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of hops required to reach the destination network to which this routing entry pertains." ::= { rtmpEntry 6 } rtmpState OBJECT-TYPE SYNTAX INTEGER { good(1), suspect(2), goingBad(3), bad(4) -- may be removed from table } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the information contained in this route entry. Setting this object to the value bad(4) has the effect of invalidating the corresponding entry AppleTalk-IP Working Group [Page 19]
RFC 1243 AppleTalk MIB July 1991 in the rtmpTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant rtmpState object." ::= { rtmpEntry 7 } -- The KIP Group kipTable OBJECT-TYPE SYNTAX SEQUENCE OF KipEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of routing information for KIP networks." ::= { kip 1 } kipEntry OBJECT-TYPE SYNTAX KipEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the routing table for KIP networks." INDEX { kipNetStart } ::= { kipTable 1 } KipEntry ::= SEQUENCE { kipNetStart OCTET STRING (SIZE(2)), kipNetEnd OCTET STRING (SIZE(2)), kipNextHop IpAddress, kipHopCount INTEGER, kipBCastAddr IpAddress, kipCore INTEGER, kipType INTEGER, kipState INTEGER, kipShare INTEGER } kipNetStart OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-write AppleTalk-IP Working Group [Page 20]
RFC 1243 AppleTalk MIB July 1991 STATUS mandatory DESCRIPTION "The first AppleTalk network address in the range for this routing entry. This address is a two octet DDP network address in network byte order." ::= { kipEntry 1 } kipNetEnd OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-write STATUS mandatory DESCRIPTION "The last AppleTalk network address in the range for this routing entry. This address is a two octet DDP network address in network byte order. If the network to which this AppleTalk port is connected is a Phase 1 network or a non-extended network, the value for kipNetEnd shall be two octets of zero." ::= { kipEntry 2 } kipNextHop OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the next hop in the route to this entry's destination network." ::= { kipEntry 3 } kipHopCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of hops required to reach the destination network to which this entry pertains." ::= { kipEntry 4 } kipBCastAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The form of the IP address used to broadcast on this network." ::= { kipEntry 5 } AppleTalk-IP Working Group [Page 21]
RFC 1243 AppleTalk MIB July 1991 kipCore OBJECT-TYPE SYNTAX INTEGER { core(1), notcore(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of this network as a Kip Core network." ::= { kipEntry 6 } kipType OBJECT-TYPE SYNTAX INTEGER { kipRouter(1), net(2), host(3), other(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of the entity that this route points to." ::= { kipEntry 7 } kipState OBJECT-TYPE SYNTAX INTEGER { configured(1), learned(2), invalid(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of this network entry. Setting this object to the value invalid(3) has the effect of invalidating the corresponding entry in the kipTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such AppleTalk-IP Working Group [Page 22]
RFC 1243 AppleTalk MIB July 1991 entries requires examination of the relevant kipState object." ::= { kipEntry 8 } kipShare OBJECT-TYPE SYNTAX INTEGER { shared(1), private(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If the information in this entry is propagated to other routers as part of a routing protocol, the value of this variable is equal to shared(1). Otherwise its value is private(2)." ::= { kipEntry 9 } -- The ZIP Group zipTable OBJECT-TYPE SYNTAX SEQUENCE OF ZipEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of zone information for reachable AppleTalk networks." ::= { zip 1 } zipEntry OBJECT-TYPE SYNTAX ZipEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry of zone information for a particular zone and network combination." INDEX { zipZoneNetStart, zipZoneIndex } ::= { zipTable 1 } ZipEntry ::= SEQUENCE { zipZoneName OCTET STRING, zipZoneIndex INTEGER, zipZoneNetStart OCTET STRING (SIZE(2)), zipZoneNetEnd OCTET STRING (SIZE(2)), zipZoneState INTEGER } AppleTalk-IP Working Group [Page 23]
RFC 1243 AppleTalk MIB July 1991 zipZoneName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The ASCII zone name of this entry." ::= { zipEntry 1 } zipZoneIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An integer that is unique to the zipZoneName that is present in this entry. For any given zone name, every zipEntry that has an equal zone name will have the same zipZoneIndex." ::= { zipEntry 2 } zipZoneNetStart OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-write STATUS mandatory DESCRIPTION "The network that starts the range for this entry. This address is a two octet DDP network address in network byte order." ::= { zipEntry 3 } zipZoneNetEnd OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) ACCESS read-write STATUS mandatory DESCRIPTION "The network that ends the range for this entry. This address is a two octet DDP network address in network byte order. If the network to which this zip entry pertains is a Phase 1 network or a non-extended network, the value for zipZoneNetEnd shall be two bytes of zero." ::= { zipEntry 4 } zipZoneState OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write AppleTalk-IP Working Group [Page 24]
RFC 1243 AppleTalk MIB July 1991 STATUS mandatory DESCRIPTION "The state of this zip entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the zipTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant zipZoneState object." ::= { zipEntry 5 } -- The NBP Group nbpTable OBJECT-TYPE SYNTAX SEQUENCE OF NbpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of NBP services registered on this entity." ::= { nbp 1 } nbpEntry OBJECT-TYPE SYNTAX NbpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The description of an NBP service registered on this entity." INDEX { nbpIndex } ::= { nbpTable 1 } NbpEntry ::= SEQUENCE { nbpIndex INTEGER, nbpObject OCTET STRING, nbpType OCTET STRING, nbpZone OCTET STRING, nbpState INTEGER } AppleTalk-IP Working Group [Page 25]
RFC 1243 AppleTalk MIB July 1991 nbpIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of this NBP entry. This value ranges from 1 to the number of NBP entries currently registered on this entity." ::= { nbpEntry 1 } nbpObject OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The name of the service described by this entity." ::= { nbpEntry 2 } nbpType OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The type of the service described by this entity." ::= { nbpEntry 3 } nbpZone OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The zone the service described by this entity is registered in." ::= { nbpEntry 4 } nbpState OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of this NBP entry. Setting this object to the value invalid(2) has AppleTalk-IP Working Group [Page 26]
RFC 1243 AppleTalk MIB July 1991 the effect of invalidating the corresponding entry in the nbpTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant nbpState object." ::= { nbpEntry 5 } -- The ATEcho Group atechoRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of AppleTalk echo requests received." ::= { atecho 1 } atechoReplies OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of AppleTalk echo replies sent." ::= { atecho 2 } END

6. Acknowledgements

This document was produced by the IETF AppleTalk-IP Working Group: Terry Braun, Novell Gregory Bruell, Shiva Philip Budne, Shiva Rob Chandhok, CMU Cyrus Chow, NASA Bruce Crabill, UMD Peter DiCamillo, Brown Robert Elz, U. of Melbourne Tom Evans, Webster Karen Frisa, CMU AppleTalk-IP Working Group [Page 27]
RFC 1243 AppleTalk MIB July 1991 Russ Hobby, UC Davis Tom Holodnik, CMU Peter Honeyman, U. of Michigan Michael Horowitz, Shiva Van Jacobson, Lawrence Berkeley Labs Doug Kerr, Novell Holly Knight, Apple Philip Koch, Dartmouth Louise Laier, Apple Nik Langrind, Shiva Joshua Littlefield, Cayman Kanchei Loa, Motorola John Mason, Apple Leo McLaughlin, TWG Milo Medin, NASA Greg Minshall, Novell Bob Morgan, Stanford Ed Moy, Berkeley Matthew Nocifore, Drexel Zbigniew Opalka, BBN Alan Oppenheimer, Apple Brad Parker, Cayman Greg Satz, Cisco John Seligson, Apple Frank Slaughter, Shiva Zaw-Sing Su, SRZ John Veizades, Apple Peter Vinsel, Apple Jonathan Wenocur, Shiva Steven Willis, Wellfleet In addition, the contribution of the following individuals is also acknowledged: Karen Frisa, Carnegie Mellon University Greg Minshall, Novell, Inc. Marshall T. Rose, PSI

7. References

[1] Cerf, V., "IAB Recommendations for the Development of Internet Network Management Standards", RFC 1052, NRI, April 1988. [2] Cerf, V., "Report of the Second Ad Hoc Network Management Review Group", RFC 1109, NRI, August 1989. [3] Rose M., and K. McCloghrie, "Structure and Identification of Management Information for TCP/IP-based internets", RFC 1155, AppleTalk-IP Working Group [Page 28]
RFC 1243 AppleTalk MIB July 1991 Performance Systems International, Hughes LAN Systems, May 1990. [4] McCloghrie K., and M. Rose, "Management Information Base for Network Management of TCP/IP-based internets", RFC 1156, Hughes LAN Systems, Performance Systems International, May 1990. [5] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple Network Management Protocol", RFC 1157, SNMP Research, Performance Systems International, Performance Systems International, MIT Laboratory for Computer Science, May 1990. [6] McCloghrie K., and M. Rose, Editors, "Management Information Base for Network Management of TCP/IP-based internets", RFC 1213, Performance Systems International, March 1991. [7] Information processing systems - Open Systems Interconnection - Specification of Abstract Syntax Notation One (ASN.1), International Organization for Standardization, International Standard 8824, December 1987. [8] Information processing systems - Open Systems Interconnection - Specification of Basic Encoding Rules for Abstract Notation One (ASN.1), International Organization for Standardization, International Standard 8825, December 1987. [9] Rose, M., and K. McCloghrie, Editors, "Concise MIB Definitions", RFC 1212, Performance Systems International, Hughes LAN Systems, March 1991. [10] Sidhu, G., Andrews, R., and A. Oppenheimer, "Inside AppleTalk", Second Edition, Addison Wesley, 1990.

8. Security Considerations

Security issues are not discussed in this memo.

9. Author's Address

Steven Waldbusser Carnegie Mellon University 4910 Forbes Ave. Pittsburgh, PA 15213 EMail: waldbusser@andrew.cmu.edu AppleTalk-IP Working Group [Page 29]