Network Working Group Bob Anderson
Request for Comments: 166 Rand
NIC 6780 Vint Cerf
UCLA
Eric Harslem
John Haefner
Rand
Jim Madden
U. of Illinois
Bob Metcalfe
MIT
Arie Shoshani
SDC
Jim White
UCSB
David Wood
Mitre
25 May 1971
DATA RECONFIGURATION SERVICE -- AN IMPLEMENTATION SPECIFICATION
CONTENTS
I. INTRODUCTION ................................... 2
Purpose of this RFC ............................ 2
Motivation ..................................... 2II. OVERVIEW OF THE DATA RECONFIGURATION SERVICE ... 3
Elements of the Data Reconfiguration SERVICE ... 3
Conceptual Network Connections ................. 3
Conception Protocols and Message Formats ....... 4
Example Connection Configurations .............. 7III. THE FORM MACHINE ............................... 8
Input/Output Streams and Forms ................. 8
Form Machine BNF Syntax ........................ 8
Alternate Specification of Form Machine Syntax . 9
Forms .......................................... 10
Rules .......................................... 10
Terms .......................................... 11
Term Format 1 ................................ 11
Term Format 2 ................................ 11
Term Format 3 ................................ 14
Term Format 4 ................................ 14
Anderson, et al. [Page 1]
RFC 166 Data Reconfiguration Service May 1971
The Application of a Term .................... 14
Restrictions and Interpretations of Term
Functions .................................. 15
Term and Rule Sequencing ..................... 16IV. EXAMPLES ....................................... 17
Remarks ........................................ 17
Field Insertion ................................ 17
Deletion ....................................... 17
Variable Length Records ........................ 18
String Length Computation ...................... 18
Transposition .................................. 18
Character Packing and Unpacking ................ 18I. INTRODUCTION
PURPOSE OF THIS RFC
The Purpose of this RFC is to specify the Data Reconfiguration
Service (DRS.)
The DRS experiment involves a software mechanism to reformat Network
data streams. The mechanism can be adapted to numerous Network
application programs. We hope that the result of the experiment will
lead to a future standard service that embodies the principles
described in this RFC.
MOTIVATION
Application programs require specific data I/O formats yet the
formats are different from program to program. We take the position
that the Network should adapt to the individual program requirements
rather than changing each program to comply with a standard. This
position doesn't preclude the use of standards that describe the
formats of regular message contents; it is merely an interpretation
of a standard as being a desirable mode of operation but not a
necessary one.
In addition to differing program requirements, a format mismatch
problem occurs where users wish to employ many different kinds of
consoles to attach to a single service program. It is desirable to
have the Network adapt to individual console configurations rather
than requiring unique software packages for each console
transformation.
Anderson, et al. [Page 2]
RFC 166 Data Reconfiguration Service May 1971
One approach to providing adaptation is for those sites with
substantial computing power to offer a data reconfiguration service;
this document is a specification of such a service.
The envisioned modus operandi of the service is that an applications
programmer defines _forms_ that describe data reconfigurations. The
service stores the forms by name. At a later time, a user (perhaps a
non-programmer) employs the service to accomplish a particular
transformation of a Network data stream, simply by calling the form
by name.
We have attempted to provide a notation tailored to some specifically
needed instances of data reformatting while keeping the notation and
its underlying implementation within some utility range that is
bounded on the lower end by a notation expressive enough to make the
experimental service useful, and that is bounded on the upper end by
a notation short of a general purpose programming language.
II. OVERVIEW OF THE DATA RECONFIGURATION SERVICE
ELEMENTS OF THE DATA RECONFIGURATION SERVICE
An implementation of the Data Reconfiguration Service (DRS) includes
modules for connection protocols, a handler of some requests that can
be made of the service, a compiler and/or interpreter (called the
Form Machine) to act on those requests, and a file storage module for
saving and retrieving definitions of data reconfigurations (forms).
This section describes connection protocols and requests. The next
section covers the Form Machine language in some detail. File
storage is not described in this document because it is transparent
to the use of the service an its implementation is different at each
DRS host.
CONCEPTUAL NETWORK CONNECTIONS
There are three conceptual Network connections to the DRS, see Fig.
1.
1) The control connection (CC) is between an originating user
and the DRS. Forms specifying data reconfigurations are
defined over this connection. The user indicates (once)
forms to be applied to data passing over the two
connections described below.
2) The user connection (UC) is between a user process and the
DRS.
Anderson, et al. [Page 3]
RFC 166 Data Reconfiguration Service May 1971
3) The server connection (SC) is between the DRS and the
serving process.
Since the goal is to adapt the Network to user and server processes,
a minimum of requirements are imposed on the UC and SC.
+------------+ +------+ +---------+
| ORIGINATING| CC | DRS | SC | SERVER |
| USER |--------------| |----------| PROCESS |
+------------+ ^ +------+ ^ +---------+
| / |
| UC/ <-----\ |
| / \ |
| +-----------+ \|
TELNET ---------+ | USER | +-- Simplex or Duplex
Protocol | PROCESS | Connections
Connection +-----------+
Figure 1. DRS Network Connections
CONNECTION PROTOCOLS AND MESSAGE FORMATS
Over a control connection the dialog is directly between an
originating user and the DRS. Here the user is defining forms or
assigning predefined forms to connections for reformatting.
The user connects to the DRS via the standard initial connection
protocol (ICP). Rather than going through a logger, the user calls
on a particular socket on which the DRS alway listens. (Experimental
socket numbers will be published later.) DRS switches the user to
another socket pair.
Messages sent over a control connection are of the types and formats
specified for TELNET. (The data type code should specify ASCII --
the default.) Thus, a user at a terminal should be able to connect
to a DRS via his local TELNET, for example, as shown in Fig. 2.
+---------+ CC +---------+
+---------| TELNET |-------| DRS |
| +---------+ +---------+
+-----------------------+
| USER |
| (TERMINAL OR PROGRAM) |
+-----------------------+
Figure 2. A TELNET Connection to DRS
Anderson, et al. [Page 4]
RFC 166 Data Reconfiguration Service May 1971
When a user connects to DRS he supplies a six-character user ID (UID)
as a qualifier to guarantee the uniqueness of his form names. He
will initially have the following commands:
1. DEFFORM (form)
2. ENDFORM (form)
These two commands define a form, the text of which is
chronologically entered between them. The form is stored
in the DRS local file system.
3. PURGE (form)
The named form, as qualified by the current UID, is purged
from the DRS file system.
4. LISTNAMES (UID)
The unqualified names of all forms assigned to UID are
returned.
5. LISTFORM (form)
The source text of a named form is returned.
6. DUPLEXCONNECT (user site, user receive socket, user method,
server site, server receive socket, server method, user-
to-server form name, server-to-user form name)
A duplex connection is made between two processes using the
receive sockets and the sockets one greater. Method is
defined below. The forms define the transformations on
these connections.
7. SIMPLEXCONNECT (user site, user socket, user method, server
site, server socket, server method, form)
A simplex connection is made between the two sockets as
specified by method.
8. ABORT (site, receive socket)
The reconfiguration of data is terminated by closing both
the UC and SC specified in part in the command.
Either one, both, or neither of the two parties specified in 6 or 7
may be at the same host as the party issuing the request. Sites and
sockets specify user and server for the connection. Method indicates
Anderson, et al. [Page 5]
RFC 166 Data Reconfiguration Service May 1971
the way in which the connection is established.
The following rules apply to these commands:
1) Commands may be abbreviated to the minimum number of
characters to identify them uniquely.
2) All commands should be at the start of a line.
3) Parameters are enclosed in parentheses and separated by
commas.
4) Imbedded blanks are ignored.
5) The parameters are:
form name 1-6 characters
UID 1-6 characters
Site 1-2 characters specifying
the hexadecimal host number
Socket 1-8 characters specifying the
hexadecimal socket number
Method A single character
6) Method has the following values:
C The site/socket is already connected
to the DRS as a dummy control connection
(should not be the real control connection).
I Connect via the standard ICP (does not
apply to SIMPLEXCONNECT).
D Connect directly via STR, RTS.
The DRS will make at least the following minimal
responses to the user:
1) A positive or negative acknowledgement after
each line (CR/LF)
2) If a form fails or terminates
TERMINATE, ASCII Host # as hex, ASCII Socket # as hex,
ASCII Return Code as decimal
thus identifying at least one end of the connection.
Anderson, et al. [Page 6]
RFC 166 Data Reconfiguration Service May 1971
EXAMPLE CONNECTION CONFIGURATIONS
There are basically two modes of DRS operation: 1) the user wishes to
establish a DRS UC/SC connection(s) between the programs and 2) the
user wants to establish the same connection(s) where he (his
terminal) is at the end of the UC or the SC. The latter case is
appropriate when the user wishes to interact from his terminal with
the serving process (e.g., a logger).
In the first case (Fig. 1, where the originating user is either a
terminal or a program) the user issues the appropriate CONNECT
command. The UC/SC can be simplex or duplex.
The second case has two possible configurations, shown in Figs. 3 and
4.
+-------+ +--------+ CC +-----+ +----+
| |----| |---------| | SC | |
| USER | | TELNET | UC | DRS |--------| SP |
| |----| |---------| | | |
+-------+ +--------+ +-----+ +----+
Figure 3. Use of Dummy Control Connection
+---------+
+------+ /| USER | CC +-----+
| |---/ | SIDE |--------| | SC +----+
| USER | +---------+ UC | DRS |--------| SP |
| |---\ | SERVING |--------| | +----+
+------+ \| SIDE | +-----+
+---------+
Figure 4. Use of Server TELNET
In Fig. 3 the user instructs his TELNET to make two duplex
connections to DRS. One is used for control information (the CC) and
the other is a dummy. When he issues the CONNECT he references the
dummy duplex connection (UC) using the "already connected" option.
In Fig. 4 the user has his TELNET (user side) call the DRS. When he
issues the CONNECT the DRS calls the TELNET (server side) which
accepts the call on behalf of the console. This distinction is known
only to the user since to the DRS the configuration Fig. 4 appears
identical to that in Fig. 1. Two points should be noted:
1) TELNET protocol is needed only to define forms and direct
connections. It is not required for the using and serving
Anderson, et al. [Page 7]
RFC 166 Data Reconfiguration Service May 1971
processes.
2) The using and serving processes need only a minimum of
modification for Network use, i.e., an NCP interface.
III. THE FORM MACHINE
INPUT/OUTPUT STREAMS AND FORMS
This section describes the syntax and semantics of forms that specify
the data reconfigurations. The Form Machine gets an input stream,
reformats the input stream according to a form describing the
reconfiguration, and emits the reformatted data as an output stream.
In reading this section it will be helpful to envision the
application of a form to the data stream as depicted in Fig. 5. An
input stream pointer identifies the position of data (in the input
stream) that is being analyzed at any given time by a part of the
form. Likewise, an output stream pointer locates data being emitted
in the output stream.
/\/\ /\/\
^ | | FORM | | ^
| | | ----------------- | | |
| | | +- ----------------- -+ | | |
| | | | CURRENT PART OF | | | |
INPUT | |<= CURRENT < ----------------- > CURRENT => | | OUTPUT
STREAM | | POINTER | FORM BEING APPLIED | POINTER | | STREAM
| | +- ----------------- -+ | |
| | ----------------- | |
| | ----------------- | |
| | ----------------- | |
\/\/ \/\/
Figure 5. Application of Form to Data Streams
Anderson, et al. [Page 8]
RFC 166 Data Reconfiguration Service May 1971
FORM MACHINE BNF SYNTAX
form ::= rule | rule form
rule ;;= label inputstream outputstream ;
label ::= INTEGER | <null>
inputstream ::= terms | <null>
terms ::= term | terms , term
outputstream ::= : terms | <null>
term ::= identifier | identifier descriptor |
descriptor | comparator
identifier ::= an alpha character followed by 0 to 3
alphanumerics
descriptor ::= (replicationexpression , datatype ,
valueexpression , lengthexpression control)
comparator ::= (value connective value control) |
(identifier *<=* control)
replicationexpression ::= # | arithmeticexpression | <null>
datatype ::= B | O | X | E | A
valueexpression ::= value | <null>
lengthexpression ::= arithmeticexpression | <null>
connective ::= .LE. | .LT. | .GE. | .GT. | .EQ. | .NE.
value ::= literal | arithmeticexpression
arithmeticexpression ::= primary | primary operator
arithmeticexpression
primary ::= identifier | L(identifier) | V(identifier) |
INTEGER
operator ::= + | - | * | /
literal ::= literaltype "string"
Anderson, et al. [Page 9]
RFC 166 Data Reconfiguration Service May 1971
literaltype ::= B | O | X | E | A
string ::= from 0 to 256 characters
control ::= : options | <null>
options ::= S(where) | F(where) | U(where) |
S(where) , F(where) |
F(where) , S(where)
where ::= arithmeticexpression | R(arithmeticexpression)
ALTERNATE SPECIFICATION OF FORM MACHINE SYNTAX
infinity
form ::= {rule}
1
1 1 1
rule ::= {INTEGER} {terms} {:terms} ;
0 0 0
infinity
terms ::= term {,term}
0
1
term ::= identifier | {identifier} descriptor
0
| comparator
1
descriptor ::= ({arithmeticexpression} , datatype ,
0
1 1 1
{value} , {lengthexpression} {:options}
0 0 0
1
comparator ::= (value connective value {:options} ) |
0
1
(identifier .<=. value {:options} )
0
connective ::= .LE. | .LT. | .GE. | .GT. | .EQ. | .NE.
lengthexpression ::= # | arithmeticexpression
datatype ::= B | O | X | E | A
value ::= literal | arithmeticexpression
Anderson, et al. [Page 10]
RFC 166 Data Reconfiguration Service May 1971
infinity
arithmeticexpression ::= primary {operator primary}
0
operator ::= + | - | * | /
primary ::= identifier | L(identifier) |
V(identifier) | INTEGER
256
literal ::= literaltype "{CHARACTER} "
0
literaltype ::= B | O | X | A | E
1
options ::= S(where) {,F(where)} |
0
1
F(where) {,S(where)} | U(where)
0
where ::= arithmeticexpression |
R(arithmeticexpression)
3
identifier ::= ALPHABETIC {ALPHAMERIC}
0
FORMS
A form is an ordered set of rules.
form ::= rule | rule form
The current rule is applied to the current position of the input
stream. If the (input stream part of a) rule fails to correctly
describe the contents of the current input then another rule is made
current and applied to the current position of the input stream. The
next rule to be made current is either explicitly specified by the
current term in the current rule or it is the next sequential rule by
default. Flow of control is more fully described under TERM AND RULE
SEQUENCING.
If the (input stream part of a) rule succeeds in correctly describing
the current input stream, then some data may be emitted at the
current position in the output stream according to the rule. The
input and output stream pointers are advanced over the described and
emitted data, respectively, and the next rule is applied to the now
current position of the input stream.
Application of the form is terminated when an explicit return
(R(arithmeticexpression)) is encountered in a rule. The user and
Anderson, et al. [Page 11]
RFC 166 Data Reconfiguration Service May 1971
server connections are closed and the return code
(arithmeticexpression) is sent to the originating user.
RULES
A rule is a replacement, comparison, and/or an assignment operation
of the form shown below.
rule ::= label inputstream outputstream
A label is the name of a rule and it exists so that the rule may be
referenced elsewhere in the form for explicit rule transfer of
control. Labels are of the form below.
label ::= INTEGER | <null>
The optional integer labels are in the range 0 >= INTEGER >= 9999.
The rules need not be labeled in ascending numerical order.
TERMS
The inputstream (describing the input stream to be matched) and the
outputstream (describing data to be emitted in the output stream)
consist of zero or more terms and are of the form shown below.
inputstream ::= terms | <null>
outputstream ::= :terms | <null>
terms ::= term | terms , term
Terms are of one of four formats as indicated below.
term ::= identifier | identifier descriptor |
descriptor | comparator
Term Format 1
The first term format is shown below.
identifier
The identifier is a symbolic reference to a previously identified
term (term format 2) in the form. It takes on the same attributes
(value, length, type) as the term by that name. Term format 1 is
normally used to emit data in the output stream.
Identifiers are formed by an alpha character followed by 0 to 3
alphanumeric characters.
Anderson, et al. [Page 12]
RFC 166 Data Reconfiguration Service May 1971
Term Format 2
The second term format is shown below.
identifier descriptor
Term format 2 is generally used as an input stream term but can be
used as an output stream term.
A descriptor is defined as shown below.
descriptor ::= (replicationexpression, datatype,
valueexpression, lengthexpression
control)
The identifier is the symbolic name of the term in the usual
programming language sense. It takes on the type, length, value, and
replication attributes of the term and it may be referenced elsewhere
in the form.
The replication expression, if specified, causes the unit value of
the term to be generated the number of times indicated by the value
of the replication expression. The unit value of the term (quantity
to be replicated) is determined from the data type, value expression,
and length expression attributes. The data type defines the kind of
data being specified. The value expression specifies a nominal value
that is augmented by the other term attributes. The length
expression determines the unit length of the term. (See the IBM SRL
Form C28-6514 for a similar interpretation of the pseudo instruction,
defined constant, after which the descriptor was modeled.)
The replication expression is defined below.
replicationexpression ::= # | arithmeticexpression | <null>
arithmeticexpression ::= primary | primary operator
arithmeticexpression
operator ::= + | - | * | /
primary ::= identifier | L(identifier) | V(identifier) |
INTEGER
The replication expression is a repeat function applied to the
combined data type value, and length expressions. It expresses the
number of times that the nominal value is to be repeated.
The terminal symbol # means an arbitrary replication factor. It must
be explicitly terminated by a match or non-match to the input stream.
This termination may result from the same or the following term.
Anderson, et al. [Page 13]
RFC 166 Data Reconfiguration Service May 1971
A null replication expression has the value of one. Arithmetic
expressions are evaluated from left-to-right with no precedence.
The L(identifier) is a length operator that generates a 32-bit binary
integer corresponding to the length of the term named. The
V(identifier) is a value operator that generates a 32-bit binary
integer corresponding to the value of the term named. (See
Restrictions and Interpretations of Term Functions.) The value
operator is intended to convert character strings to their numerical
correspondents.
The data type is defined below.
datatype ::= B | O | X | E | A
The data type describes the kind of data that the term represents.
(It is expected that additional data types, such as floating point
and user-defined types, will be added as needed.)
Data Type Meaning Unit Length
B Bit string 1 bit
O Bit string 3 bits
X Bit string 4 bits
E EBCDIC character 8 bits
A Network ASCII character 8 bits
The value expression is defined below.
valueexpression ::= value | <null>
value ::= literal | arithmeticexpression
literal ::= literaltype "string"
literaltype ::= B | O | X | E | A
The value expression is the nominal value of a term expressed in the
format indicated by the data type. It is repeated according to the
replication expression.
A null value expression in the input stream defaults to the data
present in the input stream. The data must comply with the datatype
attribute, however.
A null value expression generates padding according to Restrictions
and Interpretations of Term Functions.
The length expression is defined below.
lengthexpression ::= arithmeticexpression | <null>
Anderson, et al. [Page 14]
RFC 166 Data Reconfiguration Service May 1971
The length expression states the length of the field containing the
value expression.
If the length expression is less than or equal to zero, the term
succeeds but the appropriate stream pointer is not advanced.
Positive lengths cause the appropriate stream pointer to be advanced
if the term otherwise succeeds.
Control is defined under TERM AND RULE SEQUENCING.
Term Format 3
Term format 3 is shown below.
descriptor
It is identical to term format 2 with the omission of the identifier.
Term format 3 is generally used in the output stream. It is used in
the input stream where input data is to be passed over but not
retained for emission or later reference.
Term Format 4
The fourth term format is shown below.
comparator ::= (value connective value control) |
(identifier *<=* value control)
value ::= literal | arithmeticexpression
literal ::= literaltype "string"
literaltype ::= B | O | X | E | A
string ::= from 0 to 256 characters
connective ::= .LE. | .LT. | .GE. | .GT. | .EQ. | .NE.
The fourth term format is used for assignment and comparison.
The assignment operator *<=* assigns the value to the identifier.
The connectives have their usual meaning. Values to be compared must
have the same type and length attributes or an error condition arises
and the form fails.
The Application of a Term
The elements of a term are applied by the following sequence of
steps.
1. The data type, value expression, and length expression
together specify a unit value, call it x.
Anderson, et al. [Page 15]
RFC 166 Data Reconfiguration Service May 1971
2. The replication expression specifies the number of times x
is to be repeated. The value of the concatenated xs
becomes y of length L.
3. If the term is an input stream term then the value of y of
length L is tested with the input value beginning at the
current input pointer position.
4. If the input value satisfies the constraints of y over
length L then the input value of length L becomes the value
of the term.
In an output stream term, the procedure is the same except that the
source of input is the value of the term(s) named in the value
expression and the data is emitted in the output stream.
The above procedure is modified to include a one term look-ahead
where replicated values are of indefinite length because of the
arbitrary symbol, #.
Restrictions and Interpretations of Term Functions
1. Terms having indefinite lengths because their values are
repeated according to the # symbol, must be separated by some
type-specific data such as a literal. (A literal isn't
specifically required, however. An arbitrary number of ASCII
characters could be terminated by a non-ASCII character.)
2. Truncation and padding is as follows:
a) Character to character (A <-> E) conversion is left-
justified and truncated or padded on the right with blanks.
b) Character to numeric and numeric to numeric conversions are
right-justified and truncated or padded on the left with
zeros.
c) Numeric to character conversions is right-justified and
left-padded with blanks.
3. The following are ignored in a form definition over the control
connection.
a) TELNET control characters.
b) Blanks except within quotes.
c) /* string */ is treated as comments except within quotes.
4. The following defaults prevail where the term part is omitted.
a) The replication expression defaults to one.
b) # in an output stream term defaults to one.
c) The value expression of an input stream term defaults to
Anderson, et al. [Page 16]
RFC 166 Data Reconfiguration Service May 1971
the value found in the input stream, but the input stream
must conform to the data type and length expression. The
value expression of an output stream term defaults to
padding only.
e) The length expression defaults to the size of the quantity
determined by the data type and value expression.
f) Control defaults to the next sequential term if a term is
successfully applied; else control defaults to the next
sequential rule. If _where_ evaluates to an undefined
_label_ the form fails.
5. Arithmetic expressions are evaluated left-to-right with no
precedence.
6. The following limits prevail.
a) Binary lengths are <= 32 bits
b) Character strings are <= 256 8-bit characters
c) Identifier names are <= 4 characters
d) Maximum number of identifiers is <= 256
e) Label integers are >= 0 and <= 9999
7. Value and length operators product 32-bit binary integers. The
value operator is currently intended for converting A or E type
decimal character strings to their binary correspondents. For
example, the value of E'12' would be 0......01100. The value
of E'AB' would cause the form to fail.
TERM AND RULE SEQUENCING
Sequencing may be explicitly controlled by including control in a
term.
control ::= :options | <null>
options ::= S(where) | F(where) | U(where)
S(where) , F(where) |
F(where) , S(where)
where ::= arithmeticexpression | R(arithmeticexpression)
S, F, and U denote success, fail, and unconditional transfers,
respectively. _Where_ evaluates to a _rule_ label, thus transfer can
be effected from within a rule (at the end of a term) to the
beginning of another rule. R means terminate the form and return the
evaluated expression to the initiator over the control connection (if
still open).
If terms are not explicitly sequenced, the following defaults
prevail.
Anderson, et al. [Page 17]
RFC 166 Data Reconfiguration Service May 1971
1) When a term fails go to the next sequential rule.
2) When a term succeeds go to the next sequential
term within the rule.
3) At the end of a rule, go to the next sequential
rule.
Note in the following example, the correlation between transfer of
control and movement of the input pointer.
1 XYZ(,B,,8:S(2),F(3)) : XYZ ;
2 . . . . . . .
3 . . . . . . .
The value of XYZ will never be emitted in the output stream since
control is transferred out of the rule upon either success or
failure. If the term succeeds, the 8 bits of input will be assigned
as the value of XYZ and rule 2 will then be applied to the same input
stream data. That is, since the complete left hand side of rule 1
was not successfully applied, the input stream pointer is not
advanced.
IV. EXAMPLES
REMARKS
The following examples (forms and also single rules) are simple
representative uses of the Form Machine. The examples are expressed
in a term-per-line format only to aid the explanation. Typically, a
single rule might be written as a single line.
FIELD INSERTION
To insert a field, separate the input into the two terms to allow the
inserted field between them. For example, to do line numbering for a
121 character/line printer with a leading carriage control character,
use the following form.
(NUMB*<=*1); /*initialize line number counter to one*/
1 CC(,E,,1:F(R(99))), /*pick up control character and save
as CC*/
/*return a code of 99 upon exhaustion*/
LINE(,E,,121 : F(R(98))) /*save text as LINE*/
:CC, /*emit control character*/
(,E,NUMB,2), /*emit counter in first two columns*/
(,E,E".",1), /*emit period after line number*/
(,E,LINE,117), /*emit text, truncated in 117 byte field*/
(NUMB*<=*NUMB+1:U(1)); /*increment line counter and go to
rule one*/;;
Anderson, et al. [Page 18]
RFC 166 Data Reconfiguration Service May 1971
DELETION
Data to be deleted should be isolated as separate terms on the left,
so they may be omitted (by not emitting them) on the right.
(,B,,8), /*isolate 8 bits to ignore*/
SAVE(,A,,10) /*extract 10 ASCII characters from
input stream*/
:(,E,SAVE,); /*emit the characters in SAVE as EBCDIC
characters whose length defaults to the
length of SAVE, i.e., 10, and advance to
the next rule*/
In the above example, if either input stream term fails,
the next sequential rule is applied.
VARIABLE LENGTH RECORDS
Some devices, terminals and programs generate variable
length records. The following rule picks up variable length
EBCDIC records and translates them to ASCII.
CHAR(#,E,,1), /*pick up all (an arbitrary number of)
EBCDIC characters in the input stream*/
(,X,X"FF",2) /*followed by a hexadecimal literal,
FF (terminal signal)*/
:(,A,CHAR,), /*emit them as ASCII*/
(,X,X"25",2); /*emit an ASCII carriage return*/
STRING LENGTH COMPUTATION
It is often necessary to prefix a length field to an arbitrarily long
character string. The following rule prefixes an EBCDIC string with
a one-byte length field.
Q(#,E,,1), /*pick up all EBCDIC characters*/
TS(,X,X"FF",2) /*followed by a hexadecimal literal, FF*/
:(,B,L(Q)+2,8), /*emit the length of the characters
plus the length of the literal plus
the length of the count field itself,
in an 8-bit field*/
Q, /*emit the characters*/
TS, /*emit the terminal*/
Anderson, et al. [Page 19]
RFC 166 Data Reconfiguration Service May 1971
TRANSPOSITION
It is often desirable to reorder fields, such as the following
example.
Q(,E,,20), R(,E,,10) , S(,E,,15), T(,E,,5) : R, T, S, Q ;
The terms are emitted in a different order.
CHARACTER PACKING AND UNPACKING
In systems such as HASP, repeated sequences of characters are packed
into a count followed by the character, for more efficient storage
and transmission. The first form packs multiple characters and the
second unpacks them.
/*form to pack EBCDIC streams*/
/*returns 99 if OK, input exhausted*/
/*returns 98 if illegal EBCDIC*/
/*look for terminal signal FF which is not a legal EBCDIC*/
/*duplication count must be 0-254*/
1 (,X,X"FF",2 : S(R(99))) ;
/*pick up an EBCDIC char/*
CHAR(,E,,1) ;
/*get identical EBCDIC chars/*
LEN(#,E,CHAR,1)
/*emit the count and the char/*
: (,B,L(LEN)+1,8), CHAR, (:U(1));
/*end of form*/;;
/*form to unpack EBCDIC streams*/
/*look for terminal*/
1 (,X,X"FF",2 : S(R(99))) ;
/*emit character the number of times indicated*/
/*by the count, in a field the length indicated*/
/*by the counter contents*/
CNT(,B,,8), CHAR(,E,,1) : (CNT,E,CHAR,1:U(1));
/*failure of form*/
(:U(R(98))) ;;
[ This RFC was put into machine readable form for entry ]
[ into the online RFC archives by Simone Demmel 03/98 ]
Anderson, et al. [Page 20]